Abubuwan da ke ciki boye

1 Fasahar Fasaha ta Ecolink

2 Ecolink Z-Wave Plus FireFighter

2.1 SKU: FF-ZWAVE5-ECO

2.2 Saurin farawa

2.3 Muhimman bayanan aminci

2.4 Menene Z-Wave?

2.5 Bayanin Samfura

2.6 Shirya don Shigarwa / Sake saiti

2.6.1 Sake saita zuwa tsohowar masana'anta

2.6.2 Gargaɗi na Tsaro don Na'urori masu ƙarfi

2.7 Hadawa/keɓancewa

2.7.1 Hada

2.7.2 Warewa

2.8 Saurin matsala harbi

2.9 Ƙungiya – na'ura ɗaya tana sarrafa wata na'ura

2.9.1 Ƙungiyoyin Ƙungiya:

2.10 Bayanan Fasaha

2.11 Bayanin takamaiman sharuddan Z-Wave

2.11.1 Magana

2.12 Labarai masu alaka

Fasahar Fasaha ta Ecolink

Ecolink Z-Wave Plus FireFighter

SKU: FF-ZWAVE5-ECO

Menene Z-Wave?

Z-Wave ita ce ka'idar mara waya ta duniya don sadarwa a cikin Smart Home. Wannan
na'urar ta dace don amfani a yankin da aka ambata a cikin sashin Quickstart.

Z-Wave yana tabbatar da ingantaccen sadarwa ta hanyar sake tabbatar da kowane saƙo (hanya biyu
sadarwa) kuma kowane kulli da ke da wutar lantarki na iya aiki azaman mai maimaita sauran nodes
(hanyar sadarwa) idan mai karɓa baya cikin kewayon mara waya kai tsaye na
watsawa.

Wannan na'urar da kowace na'urar Z-Wave na iya zama amfani tare da wani
ingantaccen na'urar Z-Wave ba tare da la'akari da iri da asali ba idan dai duka biyun sun dace da
kewayon mitar guda ɗaya.

Idan na'urar tana goyan bayan amintaccen sadarwa zai sadarwa tare da wasu na'urori
amintacce muddin wannan na'urar ta ba da tsaro iri ɗaya ko mafi girma.
In ba haka ba za ta juya ta atomatik zuwa ƙaramin matakin tsaro don kiyayewa
koma baya dacewa.

Don ƙarin bayani game da fasahar Z-Wave, na'urori, farar takarda da sauransu. da fatan za a duba
zuwa www.z-wave.info.

Bayanin Samfura

Ecolink Z-Wave Plus FireFighter shine mai gano sauti wanda ke sauraron hayakin ku, wuta, ko ƙararrawar Carbon Monoxide kuma yana watsawa azaman faɗakarwa zuwa cibiyar ku don sanar da ku game da wani taron. duka nau'ikan nau'ikan 3 da 4 na na'urar jin daɗin ku, suna da rayuwar batir na shekara 5 akan (1) CR123A baturin Lithium sun haɗa. Girman suna da tsayi 3 1/8 ″ x 1″. An ba da izini don aiki tare da yawancin wuraren kunna Z-Wave akan kasuwa.

Shirya don Shigarwa / Sake saiti

Da fatan za a karanta littafin mai amfani kafin shigar da samfurin.

Domin haɗa (ƙara) na'urar Z-Wave zuwa hanyar sadarwa da ita dole ne ya kasance cikin tsohowar masana'anta
jihar Da fatan za a tabbatar da sake saita na'urar zuwa tsohuwar masana'anta. Kuna iya yin hakan ta hanyar
yin aikin keɓancewa kamar yadda aka bayyana a ƙasa a cikin jagorar. Kowane Z-Wave
mai sarrafawa zai iya yin wannan aikin duk da haka ana ba da shawarar yin amfani da na farko
mai sarrafa hanyar sadarwar da ta gabata don tabbatar da cewa an cire na'urar sosai
daga wannan hanyar sadarwa.

Sake saita zuwa tsohowar masana'anta

Wannan na'urar kuma tana ba da damar sake saitawa ba tare da sa hannun mai sarrafa Z-Wave ba. Wannan
ya kamata a yi amfani da hanya kawai lokacin da mai kulawa na farko ba ya aiki.

Default Factory FireFighter za a iya mayar da shi zuwa ga tsoffin saitunan masana'anta wanda zai cire lambar ID ɗin sa na Z-Wave Plus daga firikwensin (amma ba mai sarrafawa) tare da matakai masu zuwa. A) Saka baturin cikin firikwensin.B)Kada a danna tamper switch.C) Rike maɓallin koyo na tsawon daƙiƙa 10 har sai LED ya juya RED.D) Saki maɓallin koyo kuma jira firikwensin koren LED don kunnawa da kashewa akai-akai. A yanzu an shirya firikwensin don ƙarawa zuwa cibiyar sadarwar Z-Wave Plus, kuma an dawo da duk saituna. Da fatan za a yi amfani da wannan hanya kawai lokacin da babban mai sarrafa cibiyar sadarwa ya ɓace ko kuma ba zai iya aiki ba.

Gargaɗi na Tsaro don Na'urori masu ƙarfi

HANKALI: ƙwararrun ƙwararrun ƙwararrun ma'aikata ne kawai ƙarƙashin la'akari da takamaiman ƙasar
jagororin shigarwa/ka'idoji na iya yin aiki tare da wutar lantarki. Kafin majalissar
samfurin, voltage hanyar sadarwa dole ne a kashe kuma a tabbatar da kar a sake kunnawa.

Hadawa/keɓancewa

A kan tsohuwar masana'anta na'urar ba ta cikin kowace hanyar sadarwa ta Z-Wave. Na'urar tana buƙata
zama ƙara zuwa cibiyar sadarwa mara waya ta data kasance don sadarwa tare da na'urorin wannan cibiyar sadarwa.
Ana kiran wannan tsari Hada.

Hakanan za'a iya cire na'urori daga hanyar sadarwa. Ana kiran wannan tsari Warewa.
Dukkan hanyoyin biyu suna farawa ta hanyar babban mai kula da hanyar sadarwar Z-Wave. Wannan
an juya mai sarrafawa zuwa yanayin haɗawa daban-daban. Hadawa da Warewa shine
sannan ayi aikin hannu na musamman akan na'urar.

Hada

Ƙara SensorA)Tabbatar cewa Z-Wave Plus Controller da kuke amfani da shi ya dace da FireFighter. B) Ko dai a ɗaura ko matsar da firikwensin kusa da wurin da ke cikin ginin da za a saka firikwensin domin a ƙara sabon kumburin Z-Wave Plus zuwa daidai wurin da ke cikin teburan hanyar sadarwa na raga. C) Don ƙara firikwensin zuwa cibiyar sadarwar Z-Wave Plus data kasance, bi kwatance don saka Mai Kula da Z-Wave Plus naku cikin yanayin ƙara (haɗa). FireFighter yana shiga ƙara da cire (haɗin / ware) yanayin akan latsa maɓallin koya don 1 seconds wanda ke kan PCB tsakanin LED da t.ampya canza. Idan LED ɗin ya fara kiftawa ci gaba, firikwensin ba shi da ID na kumburi kuma ba a ƙara shi cikin nasara ba, don haka fara mataki C kuma. D) Idan bayan daƙiƙa 5 LED ɗin baya kiftawa, duba ƙirar masu sarrafa Z-Wave Plus don amsa ko an ƙara firikwensin cikin nasara. Idan baku ga wani ra'ayi cewa an ƙara firikwensin ba, bi kwatance don cire firikwensin daga hanyar sadarwar Z-Wave Plus, sannan gwada ƙara firikwensin kuma. Idan har yanzu kuna fuskantar matsaloli, ƙila kuna buƙatar ƙara ƙarin na'urorin sauraron Z-Wave Plus a tsakanin mai sarrafawa da firikwensin.

Warewa

Cire SensorA) Ana iya cire duk wani firikwensin firikwensin daga kowace hanyar sadarwa ta Z-Wave Plus tare da kowane mai sarrafa Z-Wave Plus.Bi umarnin don sanya Mai sarrafa Z-Wave Plus ɗinku cikin yanayin keɓancewar Z-Wave Plus.B) Danna maɓallin koyo da ke kusa. LED da TampIdan an samu nasarar cire su daga hanyar sadarwar Z-Wave Plus, LED na'urorin firikwensin ya kamata su yi kiftawa ci gaba idan an yi nasara.

Saurin matsala harbi

Anan akwai ƴan alamu don shigarwar hanyar sadarwa idan abubuwa ba su yi aiki kamar yadda aka zata ba.

1. Tabbatar cewa na'urar tana cikin yanayin sake saitin masana'anta kafin haɗawa. A cikin shakka cire kafin hada.
2. Idan har yanzu haɗawa ta gaza, duba idan duka na'urorin suna amfani da mitar iri ɗaya.
3. Cire duk matattun na'urori daga ƙungiyoyi. In ba haka ba za ku ga jinkiri mai tsanani.
4. Kada a taɓa amfani da na'urorin baturi mai barci ba tare da mai kula da tsakiya ba.
5. Kar a yi zaben na'urorin FLIRS.
6. Tabbatar cewa kuna da isassun na'urar da ke da wutar lantarki don cin gajiyar saƙar

Ƙungiya – na'ura ɗaya tana sarrafa wata na'ura

Na'urorin Z-Wave suna sarrafa sauran na'urorin Z-Wave. Alakar dake tsakanin na'ura daya
sarrafa wata na'ura ana kiransa ƙungiya. Domin sarrafa wani daban
na'urar, na'urar sarrafawa tana buƙatar kula da jerin na'urorin da za su karɓa
sarrafa umarni. Waɗannan jerin sunayen ana kiran su ƙungiyoyin ƙungiyoyi kuma koyaushe
masu alaƙa da wasu abubuwan da suka faru (misali maɓalli da aka danna, firikwensin firikwensin,…). Idan akwai
taron ya faru duk na'urorin da aka adana a cikin ƙungiyoyin ƙungiyoyi zasu
karbi umarnin mara waya mara waya iri ɗaya, yawanci umurnin 'Basic Set'.

Ƙungiyoyin Ƙungiya:

Lambar Rukuni Matsakaicin NodesDescription

Bayanan Fasaha

Bayanin takamaiman sharuddan Z-Wave

• Mai sarrafawa - na'urar Z-Wave ce mai iya sarrafa hanyar sadarwa.
  Masu sarrafawa galibi ƙofofin ƙofofi ne, Ikon nesa ko masu kula da bangon baturi.
• Bawa - na'urar Z-Wave ce ba tare da ikon sarrafa hanyar sadarwa ba.
  Bayi na iya zama na'urori masu auna firikwensin, masu kunnawa har ma da masu sarrafa nesa.
• Mai Kula da Farko - shine babban mai tsara hanyar sadarwa. Dole ne ya kasance
  mai sarrafawa. Za a iya samun mai sarrafawa na farko ɗaya kawai a cikin hanyar sadarwar Z-Wave.
• Hada - shine tsarin ƙara sabbin na'urorin Z-Wave cikin hanyar sadarwa.
• Warewa - shine tsarin cire na'urorin Z-Wave daga hanyar sadarwa.
• Ƙungiya - dangantaka ce mai sarrafawa tsakanin na'ura mai sarrafawa da
  na'urar sarrafawa.
• Sanarwar Wakeup - saƙo ne na musamman mara waya ta Z-Wave
  na'urar don sanar da wanda ke iya sadarwa.
• Tsarin Bayanan Node - saƙon mara waya ne na musamman wanda a
  Na'urar Z-Wave don sanar da iyawa da ayyukanta.