Imixholo fihla

1 Ecolink Intelligent Technology

2 Ecolink Z-Wave Plus Firefighter

2.1 SKU: FF-ZWAVE5-ECO

2.2 Ukuqalisa ngokukhawuleza

2.3 Ulwazi olubalulekileyo lokhuseleko

2.4 Yintoni iZ-Wave?

2.5 Ingcaciso yeMveliso

2.6 Lungiselela uFakelo / Ukuseta kwakhona

2.6.1 Phinda umisele ukusilela kwifektri

2.6.2 Isilumkiso soKhuseleko kwiZixhobo eziXhasisiweyo eziziintloko

2.7 Ukubandakanywa/Ukungabandakanywa

2.7.1 Ukuqukwa

2.7.2 Ukukhutshelwa ngaphandle

2.8 Ukudubula ingxaki ngokukhawuleza

2.9 Umbutho – isixhobo esinye silawula esinye isixhobo

2.9.1 Amaqela oMbutho:

2.10 Idatha yoBugcisa

2.11 Inkcazo yamagama athile e-Z-Wave

2.11.1 Iimbekiselo

2.12 Izithuba eziyeleleneyo

Ecolink Intelligent Technology

Ecolink Z-Wave Plus Firefighter

SKU: FF-ZWAVE5-ECO

Yintoni iZ-Wave?

I-Z-Wave yiprothokholi yamazwe ngamazwe engenazingcingo yonxibelelwano kwiKhaya le-Smart. Oku
isixhobo silungele ukusetyenziswa kummandla okhankanywe kwi Quickstart icandelo.

I-Z-Wave iqinisekisa unxibelelwano oluthembekileyo ngokuqinisekisa kwakhona umyalezo ngamnye (indlela ezimbini
unxibelelwano) kwaye zonke iinodi ezisebenza ngamandla zinokusebenza njengephinda-phinda kwezinye iindawo
(inethiwekhi ebunjiweyo) kwimeko apho umamkeli engekho kuluhlu oluthe ngqo lwamacingo lwe
umthumeli.

Esi sixhobo kunye nazo zonke ezinye izixhobo eziqinisekisiweyo ze-Z-Wave zinokuba isetyenziswe kunye nayo nayiphi na enye
isixhobo esiqinisekisiweyo se-Z-Wave kungakhathaliseki uphawu kunye nemvelaphi ukuba zombini zilungele i
uluhlu lwamaza afanayo.

Ukuba isixhobo siyaxhasa unxibelelwano olukhuselekileyo iyakunxibelelana nezinye izixhobo
ikhuselekile nje ukuba esi sixhobo sibonelela ngokufanayo okanye umgangatho ophezulu wokhuseleko.
Ngaphandle koko iya kujika ngokuzenzekelayo kwinqanaba eliphantsi lokhuseleko ukuze ligcinwe
ukuhambelana komva.

Ngolwazi oluthe kratya malunga neteknoloji ye-Z-Wave, izixhobo, amaphepha amhlophe njl njl. nceda ubhekisele
kwi www.z-wave.info.

Ingcaciso yeMveliso

I-Ecolink Z-Wave Plus FireFighter sisichongi somsindo esimamela umsi wakho, umlilo, okanye i-alamu yeCarbon Monoxide kwaye idlulisele njengesilumkiso kwi-hub yakho ukukwazisa ngesiganeko.Kulula ukubandakanya / ukungabandakanyi kunye nehabhu yakho, umtshini. zombini iipateni zexeshana ezi-3 nezi-4 zesixhobo sakho sezivamvo, sinobomi bebhetri yeminyaka emi-5 (1) CR123A Ibhetri yeLithium ibandakanyiwe.Imilinganiselo yi-3 1/8″ x 1″ ubude. imarike.

Lungiselela uFakelo / Ukuseta kwakhona

Nceda ufunde incwadi yomsebenzisi phambi kokufaka imveliso.

Ukuze ubandakanye (ukongeza) isixhobo se-Z-Wave kwinethiwekhi kuyo kufuneka ibe kwi-factory default
urhulumente. Nceda qinisekisa ukuseta kwakhona isixhobo kwifektri yomilelo. Ungakwenza oku nge
ukwenza umsebenzi wokuNqanda njengoko kuchaziwe apha ngezantsi kwincwadana. Yonke iZ-Wave
isilawuli siyakwazi ukwenza lo msebenzi nangona kunjalo kuyacetyiswa ukuba usebenzise eyona iphambili
umlawuli wothungelwano lwangaphambili ukuqinisekisa ukuba isixhobo sona asibandakanywanga kakuhle
ukusuka kule nethiwekhi.

Phinda umisele ukusilela kwifektri

Esi sixhobo sikwavumela ukusetwa kwakhona ngaphandle kokubandakanyeka komlawuli we-Z-Wave. Oku
inkqubo kufuneka isetyenziswe kuphela xa isilawuli sokuqala singasebenzi.

I-Factory Default I-FireFighter inokubuyiselwa kwimimiselo engagqibekanga yefektri eya kususa i-ID yayo ye-Z-Wave Plus node kwi-sensor (kodwa kungekhona umlawuli) ngamanyathelo alandelayo. A)Beka ibhetri kwisixhobo soluvo.B)Musa ukucinezela i-tamper switch.C)Bamba iqhosha lokufunda phantsi imizuzwana eli-10 de i-LED ijike iRED.D)Khulula iqhosha lokufunda kwaye ulinde i-LED eluhlaza ukuba iphefumle kwaye icime ngokuqhubekayo. Inzwa ngoku ilungele ukufakwa kwinethiwekhi ye-Z-Wave Plus, kwaye zonke izicwangciso zibuyiselwe.Nceda usebenzise le nkqubo kuphela xa i-primarycontroller yenethiwekhi ilahlekile okanye ingasebenzi.

Isilumkiso soKhuseleko kwiZixhobo eziXhasisiweyo eziziintloko

QAPHELA: kuphela amagcisa agunyazisiweyo phantsi kwengqwalasela yelizwe-lithile
izikhokelo zofakelo/imimiselo inokwenza imisebenzi ngamandla amakhulu. Ngaphambi kwendibano ye
imveliso, umthamotagUthungelwano lwe-e kufuneka lucinywe kwaye luqinisekiswe ngokuchasene nokutshintsha kwakhona.

Ukubandakanywa/Ukungabandakanywa

Kwi-factory default isixhobo asiyo nayiphi na inethiwekhi ye-Z-Wave. Isixhobo siyadinga
ukuba ifakwe kwinethiwekhi ekhoyo engenazingcingo ukunxibelelana nezixhobo zothungelwano.
Le nkqubo ibizwa Ukuqukwa.

Izixhobo zinokususwa kwinethiwekhi. Le nkqubo ibizwa Ukukhutshelwa ngaphandle.
Zombini iinkqubo ziqalwa ngumlawuli oyintloko wenethiwekhi ye-Z-Wave. Oku
isilawuli sijikwa sibe yimowudi yokuqukwa ngokufanelekileyo. Ukubandakanywa kunye nokuKhutshwa
emva koko yenza isenzo esikhethekileyo semanuwali ngqo kwisixhobo.

Ukuqukwa

Ukongeza iSensorA) Qiniseka ukuba iZ-Wave Plus Controller oyisebenzisayo iyahambelana noMcimi-mlilo. B) Ukunyuka okanye ukuhambisa inzwa ngokusondeleyo ngokunokwenzeka kwindawo kwisakhiwo apho i-sensor iza kunyuswa khona ukuze i-node entsha ye-Z-Wave Plus yongezwe kwindawo echanekileyo kwiitafile zomzila womnatha womnatha. C) Ukongeza isivamvo kuthungelwano olukhoyo lwe-Z-Wave Plus, landela izalathiso zokubeka i-Z-Wave Plus Controller yakho kwimowudi yokongeza (yokubandakanywa). I-FireFighter ingena yongeza kwaye isuse (ukufakwa / ukukhutshwa) imowudi yokucofa iqhosha lokufunda kwi-1 yesibini ebekwe kwi-PCB phakathi kwe-LED kunye ne-t.amper tshintsha. Ukuba i-LED iqala ukuqhwanyaza ngokuqhubekayo, inzwa ayinayo i-ID ye-node kwaye ayizange yongezwe ngempumelelo, ngoko qalisa inyathelo C kwakhona. D)Ukuba emva kwemizuzwana emi-5 i-LED ayiqhwanyazi, jonga kwi-interface ye-Z-Wave Plus controllers malunga nempendulo malunga nokuba inzwa yongezwa ngempumelelo. Ukuba awuyiboni nayiphi na ingxelo yokuba inzwa yongezwa, landela izalathiso zokususa inzwa kwinethiwekhi ye-Z-Wave Plus, kwaye uzame ukongeza inzwa kwakhona. Ukuba useneengxaki, unokufuna ukongeza izixhobo zokumamela ze-Z-Wave Plus phakathi komlawuli kunye nenzwa.

Ukukhutshelwa ngaphandle

Ukususa i-SensorA)Nasiphi na isivamvo sinokususwa kuyo nayiphi na inethiwekhi ye-Z-Wave Plus nangasiphi na isilawuli se-Z-Wave Plus.Landela izalathiso ukuze ubeke i-Z-Wave Plus Controller yakho kwimowudi yokungabandakanywa ye-Z-Wave Plus.B)Cofa iqhosha lokufunda elibekwe kufutshane. i-LED kunye ne-Tamper switch.Ukuba isuswe ngempumelelo kwinethiwekhi ye-Z-Wave Plus, ii-sensor ze-LED kufuneka ziqhwanyaze ngokuqhubekayo ukuba ziphumelele.

Ukudubula ingxaki ngokukhawuleza

Nazi iingcebiso ezimbalwa zofakelo lwenethiwekhi ukuba izinto azisebenzi njengoko bekulindelekile.

1. Qinisekisa ukuba isixhobo sikwimo yokusetwa kwakhona kwefektri phambi kokuba ubandakanye. Ngokuthandabuza ungabandakanyi phambi kokuba ubandakanye.
2. Ukuba ukubandakanywa kusasilela, khangela ukuba zombini izixhobo zisebenzisa amaza afanayo.
3. Susa zonke izixhobo ezifileyo kunxulumano. Ngaphandle koko uya kubona ukulibaziseka okukhulu.
4. Ungaze usebenzise izixhobo zebhetri eleleyo ngaphandle komlawuli osembindini.
5. Musa ukuvota izixhobo zeFLIRS.
6. Qinisekisa ukuba unesixhobo esaneleyo esine-main ukuze uxhamle kwi-meshing

Umbutho – isixhobo esinye silawula esinye isixhobo

Izixhobo ze-Z-Wave zilawula ezinye izixhobo ze-Z-Wave. Ubudlelwane phakathi kwesixhobo esinye
ukulawula esinye isixhobo kubizwa ngokuba ngumbutho. Ukuze ulawule eyahlukileyo
isixhobo, isixhobo sokulawula kufuneka sigcine uluhlu lwezixhobo eziza kufumana
imiyalelo yokulawula. Olu luhlu lubizwa ngokuba ngamaqela ombutho kwaye luhlala lukhona
ezinxulumene neziganeko ezithile (umzekelo, licinezelwe iqhosha, izichukumisi zoluvo, ...). Mhlawumbi
isiganeko senzeka zonke izixhobo ezigcinwe kwiqela lonxulumano olufanelekileyo ziya
Fumana umyalelo ofanayo wokungena ngaphandle kwamacingo, ngokuqhelekileyo Umyalelo we 'Basic Set'.

Amaqela oMbutho:

Inombolo yeQelaEzona NodesInkcazelo

Idatha yoBugcisa

Inkcazo yamagama athile e-Z-Wave

• Umlawuli — sisixhobo se-Z-Wave esinamandla okulawula inethiwekhi.
  Abalawuli badla ngokuba ziiSango, iziLawuli ezikude okanye izilawuli zodonga ezisebenza ngebhetri.
• Ikhoboka — sisixhobo se-Z-Wave esingenabuchule bokulawula inethiwekhi.
  Amakhoboka anokuba ngazivamvo, ii-activators kunye nolawulo olukude.
• UMlawuli oPhambili — ngumququzeleli oyintloko wothungelwano. Kumele kube njalo
  umlawuli. Kunokubakho umlawuli omnye ophambili kwinethiwekhi ye-Z-Wave.
• Ukuqukwa — yinkqubo yokongeza izixhobo ezitsha zeZ-Wave kuthungelwano.
• Ukukhutshelwa ngaphandle — yinkqubo yokususa izixhobo ze-Z-Wave kwinethiwekhi.
• Umbutho — lubudlelwane bolawulo phakathi kwesixhobo esilawulayo kunye
  isixhobo esilawulwayo.
• Isaziso sokuvuka - ngumyalezo okhethekileyo ongenazingcingo okhutshwe yi-Z-Wave
  isixhobo ukwazisa esikwaziyo ukunxibelelana.
• Isakhelo soLwazi lweNode — ngumyalezo okhethekileyo ongenazingcingo okhutshwe ngu
  Isixhobo se-Z-Wave ukubhengeza amandla ayo kunye nemisebenzi.