Chii chinonzi Z-Wave?

Z-Wave ndiyo yepasirese isina waya protocol yekutaurirana muSmart Home. Izvi
mudziyo wakakodzera kushandiswa munharaunda yakataurwa muchikamu che Quickstart.

Z-Wave inovimbisa kutaurirana kwakavimbika nekusimbisa meseji yese (nzira mbiri
kutaurirana) uye ese mains powered node anogona kuita seanodzokorora mamwe ma node
(meshed network) kana iyo inogamuchira isiri yakananga isina waya renji ye
transmitter.

Ichi chishandiso uye chimwe nechimwe chakasimbiswa Z-Wave chishandiso chinogona kuva kushandiswa pamwe chete nezvimwe
yakasimbiswa Z-Wave mudziyo zvisinei nerudzi uye kwaakabva chero bedzi ari maviri akakodzera kune
zvakafanana frequency range.

Kana mudziyo unotsigira kukurukurirana kwakachengeteka ichataurirana nemimwe michina
yakachengeteka chero bedzi chigadziro ichi chinopa imwechete kana yakakwirira yehutano.
Zvikasadaro zvinongoerekana zvashanduka kuita yakaderera mwero wekuchengetedza kuchengetedza
kumashure kugarisana.

Kuti uwane rumwe ruzivo nezve Z-Wave tekinoroji, zvishandiso, machena mapepa nezvimwe ndapota tarisa
kune www.z-wave.info.

Product Description

Yekushandisa mukati memba cheteKushanda frequency: 908.42 MHzKushanda zvakasiyana: Kusvika 100 tsoka (30.5 metres) mutsara-wekuonaKubata tembiricha: 0C kusvika 49C, 32F kusvika 120F (ambient tembiricha)Radhiyasi inotariswa: 39 tsoka (ona dhiyabhorosi yedunhu)Inoona nzvimbo yekuona dhigirii 45 kubva kune 3 madhigirii sensori kubva kuCRR mativi maviri: 123ABattery hupenyu: angangoita makore matatu Passive Infrared (PIR) yakavakirwa tekinoroji

Gadzirira Kuisa / Reset

Ndapota verenga bhuku rekushandisa usati waisa chigadzirwa.

Kuti ubatanidze (wedzera) mudziyo weZ-Wave kune network inofanira kunge iri mufekitari default
state. Ndokumbirawo muve nechokwadi chekuseta zvakare mudziyo mufekitari default. Unogona kuita izvi ne
kuita basa reKusabatanidzwa sezvinotsanangurwa pazasi mubhuku rekushandisa. Yese Z-Wave
controller inokwanisa kuita oparesheni iyi asi zvinokurudzirwa kushandisa yekutanga
mutongi weiyo yapfuura network kuti ave nechokwadi chekuti mudziyo wacho hauna kubatanidzwa nemazvo
kubva kune network iyi.

Dzorera kufekitari default

Ichi chishandiso chinobvumirawo kusetwa patsva pasina kubatanidzwa kweZ-Wave controller. Izvi
nzira inofanirwa kushandiswa chete kana iyo yekutanga controller isingashande.

Kuti udzorere sensor iyi kune zvigadziriso zvefekitari, tevera mirairo yekuregererwa kwechigadzirwa iyo ichagadzirisa zvakare sensor pakupera kwekugadzirisa.

Yambiro Yekuchengetedza yeMains Powered Devices

CHENJERA: vanotenderwa matekiniki chete vari pasi pekutariswa kwenyika-yakananga
kumisikidza nhungamiro/maitiro anogona kuita mabasa ane mains simba. Pamberi pegungano re
chigadzirwa, voltage network inofanirwa kudzimwa uye kuve nechokwadi kuti isachinjisa zvakare.

Kubatanidzwa/Kusabatanidzwa

Pafekitori default mudziyo hausi weZ-Wave network. Chishandiso chinoda
kuva yakawedzerwa kune iripo isina waya network kutaurirana nemidziyo yetiweki iyi.
Iyi nzira inodaidzwa Kubatanidzwa.

Midziyo inogona zvakare kubviswa kubva kunetiweki. Iyi nzira inodaidzwa Kusabatanidzwa.
Maitiro ese ari maviri anotangwa neyekutanga controller yeZ-Wave network. Izvi
controller inoshandurwa kuita yekusabatanidzwa inoenderana inclusion mode. Kubatanidzwa uye Kusabatanidzwa ndiko
obva aita kuita yakakosha yemanyorero chiito pamudziyo.

Kubatanidzwa

Kana mutongi ange ari mumodhi yekusanganisirwa, ingobvisa bhatiri rekuzviparadzanisa nevamwe, KANA isa bhatiri, KANA kudzvanya bhatani diki kuseri kweMotion Detector.

Kusabatanidzwa

Kana mutongi ange ari mumodhi yekusarudzika, ingobvisa bhatiri rekuzviparadzanisa nevamwe, KANA isa bhatiri, KANA kudzvanya bhatani diki kuseri kweMotion Detector.

Kukurukurirana kumudziyo wekurara (Wakeup)

Chishandiso ichi chinoshandiswa nebhatiri uye chinoshandurwa kuita hope dzakadzika nguva zhinji
kuchengetedza hupenyu hwebhatiri nguva. Kukurukurirana nemudziyo kunogumira. Kuti uzo
kutaurirana nemudziyo, static controller C inodiwa mumambure.
Mutongi uyu anochengetedza bhokisi retsamba remidziyo inoshandiswa nebhatiri uye chitoro
mirairo isingagamuchirwe panguva yehope huru. Pasina mutongi akadaro,
kutaurirana kunogona kuve kusingaite uye / kana hupenyu hwebhatiri nguva yakanyanya
yakaderera.

Chishandiso ichi chinomuka nguva nenguva uye kuzivisa kumuka
state nekutumira inonzi Wakeup Notification. Mutongi anogona ipapo
bvisa bhokisi retsamba. Nokudaro, chigadziro chinoda kugadziriswa nezvinodiwa
nguva yekumuka uye node ID yemutongi. Kana mudziyo wakabatanidzwa ne
a static controller uyu controller anowanzo kuita zvese zvinodiwa
configurations. Nguva yekumuka ndeye tradeoff pakati pemaximal bhatiri
nguva yehupenyu uye mhinduro dzinodiwa dzechigadzirwa. Kuti umutse mudziyo ndapota ita
chiito chinotevera:

Kana iyo sensor yakarara, ingo bvisa chivharo kuti umutse sensor kuti igadziriswe.

Kukurumidza dambudziko kupfura

Heano mashoma mazano ekuisa network kana zvinhu zvikasashanda sezvaitarisirwa.

1. Ita shuwa kuti mudziyo uri mufekitori reset mamiriro usati wasanganisira. Mukupokana usabvisa pamberi sanganisira.
2. Kana kusanganisirwa kuchiri kutadza, tarisa kana zvese zvishandiso zvinoshandisa ma frequency akafanana.
3. Bvisa zvese zvakafa kubva kumasonganiro. Zvikasadaro uchaona kunonoka kwakanyanya.
4. Usamboshandisa bhatiri midziyo yekurara isina yepakati controller.
5. Usavhote FLIRS zvishandiso.
6. Ita shuwa kuti une yakakwana mains powered mudziyo kuti ubatsirwe kubva kune meshing

Kushamwaridzana - imwe mudziyo inodzora imwe mudziyo

Z-Wave zvishandiso zvinodzora zvimwe Z-Wave zvishandiso. Ukama pakati pemudziyo mumwe
kudzora mumwe mudziyo kunonzi kushamwaridzana. Kuti udzore zvakasiyana
mudziyo, mudziyo unodzora unofanirwa kuchengetedza runyoro rwemidziyo inogashira
kudzora mirairo. Aya mazita anonzi mapoka ekubatana uye anogara aripo
zvine chekuita nezvimwe zviitiko (semuenzaniso bhatani rakadzvanywa, sensor trigger, ...). Zvikazo
chiitiko chinoitika ese maturusi akachengetwa muboka rekubatana achaita
gamuchira imwechete isina waya yekuraira isina waya, kazhinji iyo 'Basic Set' Command.

Mapoka eMasangano:

Nhamba YebokaMaximum NodesDescription

1	5	Z-Wave Uyezve Lifeline
2	5	Inoshandiswa nechinangwa chekutaurirana zvakananga kune zvimwe zvigadzirwa zveZ-Wave

Technical Data

Hardware Platform	ZM5202
Device Type	Chiziviso Sensor
Network Kushanda	Kushuma Muranda Akarara
Z-Wave Vhezheni	6.51.06
Chitupa ID	ZC10-16020001
Z-Wave Chigadzirwa Id	0x014A.0x0004.0x0001
Frequency	XXfrequency
Maximum transmission simba	XXantenna

Controlled Command Classes

• Basic

Tsanangudzo yeZ-Wave chaiyo mazwi

• Controller - iri Z-Wave mudziyo une kugona kubata network.
  Ma controller anowanzo magedhi, Remote Controls kana bhatiri rinoshandiswa madziro controller.
• Muranda - iri Z-Wave chishandiso chisina kugona kubata network.
  Varanda vanogona kunge vari masensa, actuators uye kunyange kure kure.
• Primary Controller - ndiye murongi wepakati wetiweki. Zvinofanira kuva
  controller. Panogona kuve nemutongi mumwe chete wekutanga muZ-Wave network.
• Kubatanidzwa - ndiyo maitiro ekuwedzera michina mitsva yeZ-Wave mune network.
• Kusabatanidzwa - ndiyo maitiro ekubvisa Z-Wave zvishandiso kubva kunetiweki.
• Kushamwaridzana - hukama hwekutonga pakati pemudziyo unodzora uye
  mudziyo unodzorwa.
• Wakeup Chiziviso -imeseji yakakosha isina waya yakapihwa neZ-Wave
  mudziyo wekuzivisa unokwanisa kutaura.
• Node Information Frame -imeseji yakakosha isina waya inoburitswa nea
  Z-Wave mudziyo kuzivisa kugona kwayo uye mabasa.