BL206 BL206Pro
User Manual
Shanduro: V1.2
Date:2023-10-24
Shenzhen Beilai Technology Co., Ltd
Website ：https://www.bliiot.com
BL206 Distributed Distributed Input Output Ethernet
Nhanganyaya
Ndatenda nekusarudza BLIIoT Yakagoverwa I/O. Iyi mirairo yekushandisa ine ruzivo rwese rwaunoda pakushanda kweBL206 uye BL206 Pro.
Copyright
Iri bhuku rekushandisa ndereShenzhen Beilai Technology Co., Ltd. Hapana munhu ane mvumo yekukopa, kugovera kana kutumira chero chikamu chegwaro iri pasina mvumo yakanyorwa yeShenzhen Beilai Technology. Chero kukanganisa kuchava pasi pemhosva yepamutemo.
Disclaimer
Gwaro iri rakagadzirirwa kubatsira mushandisi kunzwisisa zviri nani mudziyo. Sezvo mudziyo watsanangurwa uri kuramba uchivandudzwa, bhuku rino rinogona kuvandudzwa kana kuvandudzwa nguva nenguva pasina chiziviso. Ndapota tevera mirairo iri mubhuku rekushandisa. Chero kukanganisa kunokonzerwa nekushanda kusina kunaka kunenge kusina waranti.
Revision History
| Update Date | Version | Tsanangudzo | Muridzi |
| 2021-10-13 | V1.0 | First Edition | ZLF |
| 2022-07-01 | V1.1 | Wedzera Profinet, EtherCAT protocol, wedzera chikuva, pfungwa kudzora mabasa |
HYQ |
| 2023-07-27 | V1.1 | Chinja Model name | HYQ |
| 2023-10-24 | V1.2 | Wedzera BL203, BL206, BL207 tsananguro |
HYQ |
| 2023-10-24 | V1.2 | Bhuku rekushandisa rakakamurwa nemuenzaniso | HYQ |
Product Sumo
1.1 Pamusoroview
Iyo BL206Pro EdgeIO controller inotora data uye yekudzora sisitimu yakavakirwa pane ine simba 32-bit microprocessor dhizaini ine Linux inoshanda sisitimu, inotsigira Modbus, MQTT, OPC UA mapuroteni ekukurumidza kuwana pane-saiti PLC, DCS, PAS, MES, Ignition, uye SCADA pamwe chete neERP masisitimu, pamwe nekukurumidza kubatana kune akati wandei emakore mapuratifomu akadai seAWS Cloud, Thingsboard, Huawei Cloud, uye Ali Cloud.
Iyo I/O sisitimu inotsigira programmable logic control, edge computing, uye yakasarudzika maapplication, inoshanda zvakanyanya kune akasiyana IIoT uye maindasitiri otomatiki mhinduro.
Iyo BL206Pro yakagoverwa I/O system ine zvikamu zvitatu: Controller, I/O modules uye terminal module.
Kukurukurirana pakati peI / O nemidziyo yemumunda (semuenzaniso PLC) inoitika kuburikidza neEthernet port yemutongi, uye kutaurirana pakati pemutongi neI / O modules kunoitika kuburikidza nebhazi reko. Iwo maviri maEthernet ports akabatanidzwa nemukati nebasa rekuchinja, iro rinogona kumisikidza linear topology pasina kudiwa kwekuwedzera switch kana hubs.
Iyo sisitimu inoda kushandisa iyo module yemagetsi kupa 24VDC system voltage uye 24VDC ndima voltage. Sezvo maviri akazvimirira magetsi ekushandisa achishandiswa, iyo munda voltage input interface uye system voltage yekupinda interface yeBL206Pro controller yakaparadzaniswa nemagetsi kubva kune mumwe nemumwe.
Pakuunganidza fieldbus node modules, yega yega I/O module inogona kurongeka mune chero musanganiswa, uye haidiwe kuunganidzwa nemhando yemodule.
Iyo terminal module inofanirwa kubatirwa mukupera kwefieldbus node kuti ive nechokwadi chekufambisa data.
1.2 Yakajairika Kushandisa
Kuvimbika kwepamusoro, kuwedzera kuri nyore, kuseta kuri nyore, uye nyore network wiring, kugona uku kunoita kuti vashandisi vagadzirise iyo BL206Pro I/O sisitimu kune dzakasiyana siyana dzakaoma maindasitiri mhinduro.
Iyo I/O sisitimu inoshandiswa zvakanyanya kune akasiyana siyana ekugadzirisa maindasitiri, akadai seInternet Yezvinhu, mafekitori akangwara, maguta akangwara, smart kurapwa, dzimba dzakangwara, kufambisa kwakangwara, data centre simba rekutarisa nharaunda, simba remagetsi, kutarisa kwemafuta, mota. , zvitoro uye Logistics uye mamwe maindasitiri.
1.3 Features
- Imwe neimwe yeI/O system inogona kuve neinokwira yeI/O 32 modules.
- Tsigira Modbus, MQTT, OPC UA protocol.
- Tsigira Alibaba Cloud, Huawei Cloud, AWS Cloud, Thingsboard, Ignition, nezvimwe.
- Tsigira programmable logic control, edge computing.
- Rutivi rwemunda, rutivi rwehurongwa uye rutivi rwebhazi zvakaparadzaniswa nemagetsi kubva kune mumwe.
- Tsigiro 2 X RJ45 interface, yakasanganiswa chinja basa, inogona kumisikidza mutsara wetopology, pasina kudiwa kwekuwedzera switch kana hubs.
- Yakanaka wiring yekubatanidza tekinoroji, screw-isina kuisirwa.
1.4 Model Rondedzero
| Tsanangudzo | Model | Channel | Type |
| Modbus-TCP I/O Coupler | BL200 | / | / |
| Profinet I/O Coupler | BL201 | / | / |
| EtherCAT I/O Coupler | BL202 | / | / |
| Ethernet/IP I/O Coupler | BL203 | / | / |
| OPC UA EdgeIO Controller | BL205 | / | / |
| MQTT EdgeIO Controller | BL206 | / | MQTT |
| MQTT+OPC UA+Modbus TCP | BL206Pro | / | MQTT, OPC UA, MQTT |
| BACnet/IP I/O Coupler | BL207 | / | / |
| BACnet/IP+MQTT+OPC UA | BL207Pro | / | / |
| 8CH DI | M1081 | 8 | NPN (yakaderera level trigger) |
| 8CH DI | M1082 | 8 | PNP (high level trigger) |
| 16CH DI | M1161 | 16 | NPN (yakaderera level trigger) |
| 16CH DI | M1162 | 16 | PNP (high level trigger) |
| 4CH ITA | M2044 | 4 | Relay |
| 8CH ITA | M2081 | 8 | PNP |
| 8CH ITA | M2082 | 8 | NPN |
| 16CH ITA | M2161 | 16 | PNP |
| 16CH ITA | M2162 | 16 | NPN |
| 4CH AI Imwechete-Yapera | M3041 | 4 | 0-20mA/4-20mA |
| 4CH AI Imwechete-Yapera | M3043 | 4 | 0-5V/0-10V |
| 4CH AI Yakasiyana | M3044 | 4 | 0-5V/0-10V |
| 4CH AI Yakasiyana | M3046 | 4 | ±5V/±10V |
| 4CH AO | M4041 | 4 | 0-20mA/4-20mA |
| 4CH AO | M4043 | 4 | 0-5V/0-10V |
| 4CH AO | M4046 | 4 | ±5V/±10V |
| 2CH RTD | M5021 | 2 | 3Wire PT100 |
| 2CH RTD | M5022 | 2 | 3Wire PT1000 |
| 2CH RTD | M5023 | 2 | 4Wire PT100 |
| 2CH RTD | M5024 | 2 | 4Wire PT1000 |
| 4CH TC | M5048 | 4 | TC(B/E/J/K/N/R/S/T) |
| 2CH RS485 | M6021 | 2 | RS485 |
| 2CH RS232 | M6022 | 2 | RS232 |
| 1CH RS485, 1CH RS232 | M6023 | 2 | RS485+RS232 |
| Power module | M7011 | / | / |
| Terminal module | M8011 | / | / |
Hardware
2.1 I/O Controller
2.2 Dimension
Chikamu:mm
2.3 Data Contacts/Internal Bhazi
Kukurukurirana pakati peI/O controller neI/O modules, pamwe neiyo system power supply yeI/O modules inowanikwa kuburikidza nebhazi remukati. Bhazi remukati rinoumbwa ne6 data contacts, aya ane goridhe-akapfatwa maconta ari kuzvichenesa kana akabatana.
2.4 Simba Jumper Contacts
Iyo module yemagetsi inosanganisirwa neye controller ine mbiri yekuzvichenesa simba jumper contacts for powering the field side. Iri magetsi emagetsi ane huwandu hwepamusoro hwe10A pane ese macontacts, ikozvino inodarika iyo yepamusoro inokuvadza vanobatika. Paunenge uchigadzirisa sisitimu, inofanirwa kuve nechokwadi kuti iyo yataurwa pamusoro apa yakanyanya ikozvino haina kupfuurwa. Kana ikapfuura, module yekuwedzera magetsi inoda kuiswa.
| Aihwa. | Type | Tsanangudzo |
| 1 | Spring kusangana | Ipa 24V kudivi remunda |
| 2 | Spring kusangana | Ipa 0V kudivi remunda |
2.5 Terminal Point
| Zita | Tsanangudzo |
| 24V | Sistimu Simba 24VDC |
| 0V | Sistimu Simba 0VDC |
| + | Kubatanidza Munda Wekupa 24 VDC |
| + | Kubatanidza Munda Wekupa 24 VDC |
| – | Kubatanidza Munda Wekupa 0 VDC |
| – | Kubatanidza Munda Wekupa 0VDC |
| PE | Grounding |
| PE | Grounding |
2.6 Factory Reset
Iri bhatani reseta rinoshandiswa kudzoreredza magadzirirwo emidziyo kumamiriro efekitori.
Matanho ekushanda:
- Kana mudziyo uchishanda, vhura flip cover;
- Dzvanya uye ubate bhatani kweanopfuura masekonzi mashanu, kudzamara mwenje yese yeLED yadzima, inoratidza kugadziridza kwakabudirira, uye ipapo mudziyo unobva watangazve.
2.7 Electrical Schematic
Installation
3.1 Kuisa Sequence
Vese vakagoverwa controllers uye I/O modules kubva kuBeilai Technology inofanirwa kuiswa pane yakajairwa DIN 35 njanji.
Kutanga kubva kumutongi, iyo I / O modules inounganidzwa kubva kuruboshwe kuenda kurudyi, uye ma module akaiswa padivi peumwe neumwe. Ese maI/O modules ane grooves uye simba jumper contacts kurutivi rworudyi, kudzivirira zvikanganiso zvegungano, I / O modules inofanira kuiswa kubva kurudyi uye kumusoro kuti irege kukuvadza kumamodules.
Inoshandisa rurimi uye groove system kugadzira yakachengeteka yakakodzera uye yekubatanidza. Neyo otomatiki yekuvhara basa, iyo yega zvikamu zvinogadziriswa zvakachengeteka pane njanji mushure mekuiswa.
Usakanganwa kuisa iyo terminal module! Gara uchibatanidza terminal module (semu TERM) kusvika kumagumo eiyo I/O module kuti uve nechokwadi chekufambisa data chaiko.
3.2 Isa Controller
- Tora iyo coupler paDIN njanji kutanga;
- Shandisa chishandiso chakaita sescrewdriver kutendeutsa kamera yekukiya kusvika iyo yekukiya cam inobata njanji yeDIN.
3.3 Bvisa Controller
- Shandisa screwdriver kutendeutsa yekukiya disc cam kusvika iyo yekukiya cam isingachabatiki njanji.
- Dhonza iyo yekuburitsa tab kuti ubvise coupler kubva kugungano
Dhata kana magetsi ekubatanidza anobviswa nemagetsi kubva padyo neI / O modules kana controller yabviswa.
3.4 Isa I/O Modules
- Paunenge uchiisa module, ita shuwa kuti ma tabo ari pa module anoenderana nema grooves emutongi kana imwe I/O module iyo yakanamirwa.
- Dzvanya iyo I/O module munzvimbo yegungano kusvika I/O module yapinda muchitima.
Mushure mekunge I / O module yaiswa, magetsi ekubatanidza kune mutungamiriri (kana yapfuura I / O module) uye inotevera I / O module inotangwa kuburikidza nedata contacts uye simba jumper contacts.
3.5 Bvisa I/O Modules
Dhonza kumusoro pane latch kuti ubvise iyo I / O module kubva kugungano.
Kana iyo I / O module yabviswa, kubatanidzwa kwemagetsi kune data kana simba jumper contacts ndiko kubviswa.
Device Connection
4.1 Wiring
CAGE CLAMP kubatana kwakakodzera kune akasimba, akasungwa uye akakwenenzverwa makondakita.
Waya imwe chete inogona kubatana kune yega yega CAGE CLAMP. Kana pane inopfuura waya imwe chete, inofanira kubatanidzwa mune imwe nzvimbo isati yabatanidzwa.
- Vhura iyo CAGE CLAMP nekupinza mudziyo muburi repamusoro pemuchinjiko.
- Isa waya mune inowirirana yakavhurika yekubatanidza terminal.
- Kana chishandiso chabviswa, iyo CAGE CLAMP inovhara uye waya iri clamped zvakasimba nechirimo.
4.2 Simba rekupa
System uye munda voltages anopihwa nemagetsi ekupa modules. Iyo magetsi emagetsi module yeBL206Pro controller inopa simba remukati memagetsi emutongi uye maI/O module. Kana zvichidikanwa (kune akawanda I/O modules uye yazvino yakakwira), inogona zvakare kupihwa kuburikidza neyakazvimirira magetsi emagetsi module.
Iyo fieldbus interface (Ethernet interface), sisitimu nemunda zvakaparadzaniswa kubva kune mumwe nemumwe.
4.2.1 Sistimu Simba
BL206Pro controller inoda 24V DC system simba, iyo yakabatana kubva kune terminal yemagetsi ekupa module. Iyo 5V bhazi voltage inodiwa mukati meiyo system inoshandurwa kubva ku24V system voltage.
Iyo magetsi module inongori nekudzivirira kwakaringana fuse, ndapota ipai kudzivirira kwakaringana kunze.
Ndokumbira utarise kuenzanisa simba rekubuda remagetsi ekupa module uye simba rekutakura kuti udzivise kuwanda kwemutoro ikozvino.
4.2.2 Pane-saiti Simba rekupa
Iyo magetsi emagetsi module inopa 24 VDC padivi remunda kuti igone masensa uye actuators.
Magetsi emumunda ane fuse dziviriro chaiyo. Pasina kuchengetedzwa kwepamusoro, zvigadzirwa zvemagetsi zvinogona kukuvadzwa.
Simba-parutivi simba rinobuda otomatiki kubva kune simba jumper kuonana kana I/O module yakabatana. Iyo inoenderera inoremedza ikozvino kune inobatika yemagetsi magetsi haifanire kudarika 10 A.
Dambudziko rekuwedzera simba rekutakura padivi rehurongwa kana kudivi remunda rinogona kugadziriswa nekuisa mamwe ma module emagetsi ekuwedzera. Mushure mekuisa imwe yekuwedzera magetsi module, nyowani voltage zvinogona kuoneka padivi pemunda.
Muchiitiko apo kuparadzaniswa kwemagetsi kusingadiwi, simba remunda uye hurongwa hwemagetsi hunogona kushandisa simba rimwechete.
4.2.3 Grounding
Pakuisa kabati yakavharirwa, iyo kabhineti inofanirwa kudzika pasi, uye njanji inobatanidzwa nemagetsi kukhabhineti kuburikidza nemasikiru kuona kuti njanji yakadzikwa zvakanaka. Grounding inogona kuwedzera kuramba kune electromagnetic kukanganiswa. Zvimwe zvikamu muI/O system zvine njanji yekubatanidza inoparadzira EMI muchitima.
BL206 Series Controller
5.1 BL206 MQTT EdgeIO Controller
5.1.1 BL206 Overview
Iyo BL206 controller inotsigira MQTT protocol, uye data inogona kuiswa kuAlibaba Cloud, Huawei Cloud, AWS Cloud, Thingsboard, BLIIoT gore, Tsika MQTT gore.
5.1.2 Technical Parameters
| Zita | Parameters | Tsanangudzo |
| Simba rehurongwa | Kuisa voltage(system) | 24 VDC |
| Input current(system) | MAX 500 mA@24VDC | |
| Simba Kubudirira | 84% | |
| Bhazi remukati voltage | 5VDC | |
| Controller ikozvino kushandiswa | MAX 300mA@5VDC | |
| I / O kushandiswa ikozvino | MAX 1700mA@5VDC | |
| Kuzviparadzanisa nevamwe | 500 V system / kupa | |
| Simba remumunda | Kuisa voltage (munda) | 24 VDC |
| Ikozvino kutakura simba (simba jumper contacts) | MAX 10 ADC | |
| Ethernet | Number | 2 X RJ45 |
| Transmission medium | Twisted Pair STP 100 Ω Katsi 5 | |
| MAX tambo kureba | 100m | |
| Baud rate | 10/100 Mbit / s | |
| Kuzviparadzanisa nevamwe | ESD kubata 8KV, Surge 4KV(10/1000us) | |
|
System |
Operating system | Linux |
| CPU | 300MHz | |
| RAM | 64MB | |
| Flash | 128MB | |
| Nhamba yeI/O modules | MAX 32 | |
| Protocols | MQTT, HTTP, DHCP, DNS | |
| Wiring | Nzira | CAGE CLAMP |
| Waya dhayamita | 0.08 mm² ⋯ 2.5 mm², AWG 28 ⋯ 14 | |
| Kureba kwemutsetse | 8 mm ⋯ 9 mm / 0.33 mukati | |
|
Environment |
Kushanda tembiricha | 0 ⋯ 55 °C |
| Kuchengetedza tembiricha | -40 ⋯ 70 °C | |
| Hunyoro hunyoro | 5 ⋯ 95% hapana condensation | |
| Kushanda urefu | 0 ⋯ 2000 m | |
| Dziviriro | IP20 | |
| Dimension | Upamhi | 48mm |
| Urefu | 100mm | |
| Urefu | 69mm |
| Material | Color | Chiedza chepfumbu |
| Zvinhu zveimba | Polycarbonate, Nylon 6.6 | |
| Moto mutoro | 1.239MJ | |
| Kurema | 180g | |
| Installation | Nzira | DIN-35 |
|
Certificated |
EMC |
EN 55022: 2006/A1: 2007 (CE &RE)
Kirasi B |
| IEC 61000-4-2 (ESD) Chikamu 4 | ||
| IEC 61000-4-3 (RS) Chikamu 4 | ||
| IEC 61000-4-4 (EFT) Chikamu 4 | ||
| IEC 61000-4-5 (Surge) Chikamu 3 | ||
| IEC 61000-4-6 (CS) Chikamu 4 | ||
| IEC 61000-4-8 (M/S) Chikamu chechina |
5.1.3 Hardware Interface
5.1.3.1 LED zviratidzo
| LED | Tsanangudzo | Color | Status | Meaning |
| PWR | Simba chiratidzo | Tsvuku | ON | Simba rekubatanidza rakabudirira |
| DZIMA | Hapana simba | |||
| SYS | Chiratidzo cheSystem | Girinhi | ON | Sisitimu haina kujairika |
| DZIMA | Sistimu iri kushanda zvakajairika | |||
| MHANYA | Running chiratidzo | Girinhi | Kupenya | Sistimu iri kushanda zvakajairika |
| DZIMA | Sisitimu haina kujairika | |||
| ERR | Chiratidzo chekukanganisa | Tsvuku | ON | Northbound protocol kukanganisa kukanganisa |
| DZIMA | Hapana kukanganisa |
| I/O MHANYA | I/O Running chiratidzo | Girinhi |
Kupenya |
I/O module iri kushanda zvakajairika |
| DZIMA | Module haina kuiswa | |||
| I/O ERR | I/O Chikanganiso chiratidzo | Tsvuku | ON | I/O module yekutaurirana kukanganisa |
| DZIMA | Hapana kukanganisa |
| LED | Tsanangudzo | Color | Status | Meaning |
|
S |
System 24V simba chiratidzo | Girinhi | ON | Simba rakanaka |
| DZIMA | Hapana simba | |||
| F | Munda 24V simba chiratidzo | Girinhi | ON | Simba rakanaka |
| DZIMA | Hapana simba |
5.1.3.2 Ethernet Port
Batanidza kune Ethernet-yakavakirwa fieldbus kuburikidza neETH2.
EHT1 inoshandiswa kubatanidza dzimwe node dzinoda kubatana neEthernet.
5.1.3.3 IP Kero Selection Switch
Iyo 8-bit DIP switch inoshandiswa kuseta IP kero. Iko kukodha kweDIP switch kunoitwa zvishoma nezvishoma, kutangira paDIP chinja 1 ine kadikidiki kakakosha (2 0) kuenda kuDIP chinja 8 ine yakanyanya kukosha bit (2 7 ), inoenderana nedecimal values: 0-255.
Kana kukosha kweiyo DIP switch iri 1111 1111 (decimal 255), iyo IP kero inoiswa zvinoenderana ne web peji. The web kuseta peji kunogona kutsanangura IP kana kuseta otomatiki kutora. Apo iyo web peji haina kuiswa, iyo IP kero ndeiyi: 192.168.1.10 Kana kukosha kweDIP switch iri 0000 0000 - 1111 1110 (decimal 0-254), sarudza 3rd byte yeIP kero, uye yekutanga, 1nd uye 2th bytes. anogadziriswa mabhayiti, anoti 4.xxx.192.168
5.1.4 MQTT Identifiers
Iyo MQTT identifier ndeye REG + Modbus mepu kero (senge yekutanga DO module kutanga ITA: REG1000).
5.1.5 Controller Connection
Iyo BL206 controller inouya ne 2 x RJ45 Ethernet ports, integrated switch function mukati, shanda muchitoro-uye-mberi oparesheni modhi, chiteshi chega chega chinotsigira 10/100 Mbit transmission speed uye yakazara-duplex uye hafu-duplex transmission mode.
Iyo BL206 controller inobatana kune router Ethernet network kuburikidza neETH2 chete, nepo EHT 1 ndeyekubatanidza mamwe ma node.
Iyo yemukati yakasanganiswa switch inotsigira bypass modhi, iyo inogona kutanga otomatiki nzira yekupfuura kana iyo controller system yatadza, uye otomatiki chengetedza chinongedzo pakati peETH1 neEHT2.
Wiring dzeidzi Ethernet ports dzinoenderana ne100BaseTX yakatarwa, iyo inotsanangura kushandiswa kwechikamu 5 chakamonyoroka pair tambo setambo yekubatanidza. Cable types S/UTP (Screened unshielded twisted pair) uye STP (shielded twisted pair) inogona kushandiswa kusvika pakureba kwe100m.
5.1.6 Web Kugadzirisa Peji
BL206 MQTT Controllerr yakavakirwa-mukati web server ibrowser-based configuration utility.
Kana node yakabatana kunetiweki yako, unogona kuwana iyo web console nekuisa iyo IP kero ye server mune yako web browser.
5.1.6.1 Kugadzirira Usati Wagadzirisa
Kuti ubudirire kuwana BL206, inofanirwa kuiswa zvakanaka uye yakabatana nekombuta. Uye zvakare, vagadzirise nemakero epa IP kuti varambe vari muchikamu chimwe chete chetiweki.
5.1.6.1.1 Batanidza Computer uye Controller
- Isa iyo fieldbus node pane DIN35 njanji. Tevera mirairo yekuisa muchikamu che "Instalation".
- Batanidza iyo 24 V magetsi ekupa kune system power terminals.
- Iyo kombiyuta uye node yebhazi inogona kubatanidzwa nenzira mbiri, imwe ndeyokuti maviri acho akabatanidzwa kune switch switch yenzvimbo yemunharaunda network kuburikidza neEthernet port; imwe yacho ndeyekuti maviri akabatana zvakananga point-to-point. Kuti uwane nhanho dzakadzama, tevera mirairo iri muchikamu che "Controller Connection".
- Batidza magetsi uye tanga kupa magetsi.
Iyo controller inotangwa mushure mesimba-kumusoro, inogadzira process mufananidzo zvinoenderana neI / O mamodule ekugadziriswa kwenode.
5.1.6.1.2 Gadzira IP Kero yeComputer
Pane nzira mbiri dzekugadzirisa PC IP kero. Imwe ndeye kubatidza otomatiki IP kero sarudzo paPC's yemunharaunda yekubatanidza kugovera zvine simba DHCP munetiweki. Imwe yacho ndeyekugadzirisa static IP kero ine coupler node pane imwechete network segment pane yeko kubatana kwePC.
Inotora Windows 7 system seyakareample for configuration. Windows masisitimu ese akagadziridzwa zvakafanana.
- Dzvanya Tanga> Control Panel> Network and Sharing Center, wobva wadzvanya kubatana kwenzvimbo pahwindo rinovhurwa.
- Muhwindo renzvimbo yekubatanidza mamiriro, tinya Properties.
- Tinya kaviri “Internet Protocol Version 4 (TCP/IPv4)” papeji yenzvimbo yekubatanidza zvivakwa.
- Pane nzira mbiri dzekugadzirisa IP kero yePC
• Wana IP kero otomatiki (system default mode)
Kuti uwane kero yeIP otomatiki kubva kuDHCP server, sarudza "Tora IP kero";
• Seta static IP kero
Sarudza "Shandisa iyo inotevera IP kero" uye isa iyo chaiyo kukosha kweiyo IP kero, subnet mask uye default gedhi.
5.1.6.1.3 Rongedza Controller IP kero
Pane nzira mbiri dzekupa IP kero
- Kugoverwa kuburikidza neyakavakwa-mukati web peji (static IP kana otomatiki IP basa)
- Govera kuburikidza neDIP switch (static IP)
DIP kero yekusarudza chinja tsanangudzo
| Chinja chinzvimbo （ON = 1） | Value | Tsanangudzo |
|
0000 0000 - 1111 1110 |
0-254 |
Gonesa iyo DIP selector switch assignment basa uye uone kukosha kwe3rd byte. Example: 0010 0110 (22 decimal), IP address is "192.168.22.253". |
| 1111 1111 | 255 | Gonesa basa rekutsanangura IP pane iyo web peji, kana sarudza basa reDHCP automatic allocation. Kana iyo IP isina kugoverwa kuburikidza ne web, iyo IP is 192.168.1.10. |
5.1.6.1.3.1 Configuration kuburikidza Web Page
Iyo controller inogona kusetwa kune IP kero kuburikidza ne "Zvirongwa> Yemunharaunda Zvirongwa" peji mushure mekupinda peji, kana inogona kusetwa kuti igoverwe otomatiki. Sarudza static kero, kana isina kusetwa IP kero, iyo IP ndeye 192.168.1.10
5.1.6.1.3.2 Govera IP kuburikidza neDIP Switch
Seta kukosha kweDIP kero yekusarudza chinja ku0000 0000 - 1111 1110 (decimal 0 254), uye IP kero ichapihwa neiyo DIP switch.
Iyo IP kero ine yakagadziriswa mabhaiti uye akasiyana mabhaiti. Iyo 1st, 2nd uye 4th mabhaiti akagadziriswa mabhaiti, iyo DIP selector switch inosarudza 3rd byte, inoti: 192.168.xxx.253
Mutongi anogovera IP kero kuburikidza neDIP switch, uye IP kero yakaiswa nenzira iyi inomira.
5.1.6.1.4 Factory Default Settings
Usati wapinda mu web peji rekugadzirisa, zvinodikanwa kuti iwe unzwisise zvinotevera default paramita,
IP: Yakatemerwa zvinoenderana neDIP switch, kana DIP switch iri 1111 1111, iyo default IP ndeye 192.168.1.10
Kana fekitori default DIP switch iri 0000 0000 chinzvimbo, ipapo IP iri 192.168.0.253
| Item | Tsanangudzo |
| Username | admin |
| Pasiwedhi | Empty |
5.1.6.2 Peji Yekugadzirisa Peji
- Vhura browser pakombuta yako, senge IE, Chrome, nezvimwe.
- Isa iyo IP kero ye controller node (192.168.1.10) mukero bar yebrowser kuti upinde mushandisi yekupinda interface.
- Pinda "Username" uye "Password" mune yekupinda interface, wobva wadzvanya Login.
- Mushure mekubudirira kupinda mu web interface, chiratidziro chakaita seinotevera
30 pase
Zvinyorwa / Zvishandiso
 |
BLIIOT BL206 Distributed Distributed Input Output Ethernet [pdf] User Manual BL206 Distributed Distributed Input Ethernet, BL206, Distributed Distributed Input Output Ethernet, Distributed Input Output Ethernet, Input Output Ethernet, Output Ethernet, Ethernet |