MARSON MT82M Fa'asinomaga Fa'ainisinia
Fa'amatalaga o oloa
O le MT82M o le 2D Scan Engine ua fuafuaina mo le tuʻufaʻatasia i masini eseese. O lenei Ta'iala Tu'ufa'atasi o lo'o tu'uina atu ai fa'amatalaga au'ili'ili ile feso'ota'iga eletise, fa'ailoga pine, fa'asologa o va'aiga fafo, ma fa'amatalaga uaea.
Folasaga
O le MT82M Scan Engine o loʻo faʻapipiʻiina i se fesoʻotaʻiga FPC 12-pin mo le faʻaogaina o le tino.
Ata poloka
O se ata poloka e faʻaalia ai vaega ma fesoʻotaʻiga o le MT82M Scan Engine o loʻo tuʻuina atu i le Taʻiala Tuufaatasi.
Fa'afeso'ota'i eletise
E fa'aogaina e le MT82M Scan Engine se feso'ota'iga 0.5-pitch 12-pin FPC mo le fa'aoga eletise.
Pin Tofiga
O le faʻatonuga o pine mo le MT82M Scan Engine e faʻapea:
| Pin# | Fa'ailoga | I/O | Fa'amatalaga |
|---|---|---|---|
| 1 | NC | — | Fa'apolopolo |
| 2 | VIN | Pwr | Paoa sapalai: 3.3V DC |
| 3 | GND | Pwr | Malosiaga ma faailoilo eleele |
| 4 | RXD | Ulufale | Maua Faʻamatalaga: Taulaga faʻapipiʻi faʻasologa |
| 5 | TXD | Tuuina atu | Fa'asalalauina Fa'amatalaga: Taulaga fa'asologa fa'asologa |
| 6 | D- | Tuuina atu | Fa'aliliuina Fa'ailoga Fa'ailoga Fa'ailoga Fa'atasi USB (USB D-) |
| 7 | D+ | Tuuina atu | Fa'aliliuina Fa'ailoga Fa'ailoga Fa'ailoga Fa'atasi USB (USB D+) |
| 8 | PWRDWN/WAKE | Ulufale | Malosi i lalo: A maualuga, o le decoder o loʻo i lalo o le eletise Ala: A maualalo, o le decoder o loʻo i le faiga faʻaoga |
| 9 | BPR | Tuuina atu | Beeper: E maualalo le gaosiga o lo'o iai nei |
| 10 | nDLED | Tuuina atu | Fa'ailoga ta'ita'i: E maualalo le fa'asologa o lo'o iai nei le fa'aogaina o le ta'ita'i |
| 11 | NC | — | Fa'apolopolo |
| 12 | nTRIG | Ulufale | Fa'aoso: Laina fa'aosoina meafaigaluega. O le aveina o lenei pine e mafua ai ona maualalo le scanner e amata ai se fa'ata'ita'iga ma fa'avasega le vasega |
Fuafuaga Fa'ata'ita'i i fafo
O le Ta'iala Fa'atasi o lo'o tu'uina atu ai fa'ata'ita'iga fa'ata'amilosaga mo le ta'avaleina o se LED i fafo mo fa'ailoga lelei faitau, se pi'o mai fafo, ma se ta'amilosaga fa'aoso mo le afi su'esu'e.
Lelei Faitau Lisi LED
O le faailo o le nDLED mai le pine 10 o le 12-pin FPC connector e faʻaaogaina e ave ai se LED fafo mo faʻamatalaga lelei faitau.
Beeper Circuit
O le faailo o le BPR mai le pine 9 o le 12-pin FPC connector e fa'aaogaina e fa'aola ai se pipe i fafo.
Trigger matagaluega
O le faailo nTRIG mai le pine 12 o le 12-pin FPC fesoʻotaʻiga e faʻaaogaina e tuʻuina atu ai se faʻailoga e faʻaosoina ai se sauniga decode.
Tusia Uaea
E mafai ona fa'aogaina se uaea FFC 12-pin e fa'afeso'ota'i ai le MT82M Scan Engine i se masini fa'afeiloa'i. O le mamanu uaea e tatau ona ogatusa ma faʻamatalaga o loʻo tuʻuina atu i le Taʻiala Tuufaatasi. E fautuaina e faʻaoga mea faʻamalosi mo fesoʻotaʻiga i luga o le uaea ma faʻaitiitia le faʻaogaina o le uaea mo fesoʻotaʻiga faʻalagolago ma le faʻatinoga mautu.
Fa'atonuga o le Fa'aaogaina o Mea
Ina ia faʻapipiʻi le MT82M Scan Engine i lau masini, mulimuli i laasaga nei:
- Review le ata poloka o loʻo tuʻuina atu i le Taʻiala Faʻatasi e malamalama ai i vaega ma fesoʻotaʻiga o le MT82M Scan Engine.
- Ia mautinoa o loʻo i ai sau uaea FFC 12-pin talafeagai e fetaui ma faʻamatalaga o loʻo taʻua i le Taʻiala Faʻatasi.
- Fa'afeso'ota'i le feso'ota'iga 12-pin FPC o le MT82M Scan Engine i le feso'ota'iga tutusa i lau masini fa'afeiloa'i e fa'aaoga ai le uaea FFC.
- Afai e te mana'o e fa'aoga fa'ailoga i fafo, e pei o le LED po'o le pi, fa'asino i mamanu fa'ata'ita'i o lo'o tu'uina atu i le Ta'iala Fa'atasi ma fa'afeso'ota'i fa'atatau.
- Afai e te manaʻomia le faʻaosoina o se faʻataʻitaʻiga ma faʻavasega le vasega, faʻaoga le faailo nTRIG mai pine 12 o le 12-pin FPC connector. Tu'u maualalo le pine lenei e amata ai le faiga o su'ega.
E ala i le mulimuli i nei faatonuga, e mafai ona e fa'aogaina lelei ma fa'aoga le MT82M Scan Engine i lau masini.
FOLASAGA
- O le MT82M One-piece Compact 2D Scan Engine e maua ai le fa'ata'ita'iga fa'avavevave i se tau fa'atauva ma fa'ailoga fa'atusatusa. Faatasi ai ma lona mamanu atoa-i-tasi, MT82M 2D suʻesuʻe afi e mafai ona faigofie ona tuʻufaʻatasia ma faʻaoga faʻapitoa e pei o le faʻaogaina o avanoa, lotoa kiosk ma tagata faʻatau eletise.
- O le MT82M 2D Scan Engine e aofia ai le 1 faʻamalamalamaga LED, 1 aimer LED ma se faʻataʻitaʻiga ata maualuga ma se microprocessor o loʻo i ai le firmware malosi e pulea ai vaega uma o gaioiga ma mafai ai ona fesoʻotaʻi ma le 'au talimalo i luga o le seti masani o fesoʻotaʻiga fesoʻotaʻiga.
- E tele feso'ota'iga e maua. UART fa'afeso'ota'i feso'ota'iga ma le 'au talimalo i luga o feso'ota'iga UART; O feso'ota'iga USB e fa'ata'ita'i i le USB HID Keyboard po'o le Virtual COM port device ma feso'ota'i ma le 'au talimalo i luga ole USB.
Ata poloka
Fa'afeso'ota'i eletise
Pin Tofiga
- O le faʻaoga faʻapitoa o MT82M e aofia ai se fesoʻotaʻiga FPC 0.5-pitch 12-pin. O lo'o i lalo le ata o lo'o fa'aalia ai le tulaga o le feso'ota'iga ma le pine1.
Fuafuaga Fa'ata'ita'i i fafo
Lelei Faitau Lisi LED
O le matagaluega o loʻo i lalo e faʻaaogaina e ave ai se LED fafo mo faʻamatalaga lelei faitau. O le faailo nDLED e mai le pine10 o le 12-pin FPC feso'ota'iga.
Beeper Circuit
O le ta'amilosaga o lo'o i lalo o lo'o fa'aaogaina e ave ai le pipo i fafo. O le faailo BPR e mai le pine9 o le 12-pin FPC connector.
Trigger matagaluega
O le matagaluega o loʻo i lalo o loʻo faʻaaogaina e tuʻuina atu ai le afi faʻataʻitaʻi ma se faʻailoga e faʻaosoina ai se vasega faʻavasega. O le faailo nTRIG e mai le pin12 o le 12-pin FPC connector.
Tusia Uaea
Uaea FFC (iunite: mm)
E mafai ona fa'aogaina se uaea FFC 12-pin e fa'afeso'ota'i le MT82M e fa'afeiloa'i ai masini. O le mamanu uaea e tatau ona ogatasi ma faʻamatalaga o loʻo faʻaalia i lalo. Fa'aoga mea fa'amalosi mo feso'ota'iga i luga o le uaea ma fa'aitiitia le fa'alavelave uaea mo feso'ota'iga fa'alagolago ma mautu le fa'atinoga
FAAMATALAGA
Folasaga
- O lenei mataupu o loʻo tuʻuina atu ai faʻamatalaga faʻapitoa o le MT82M. O lo'o tu'uina atu fo'i le auala e fa'agaioi ai, va'aiga fa'ata'ita'i ma le tulimanu fa'ata.
Fa'amatalaga Fa'apitoa
| Optic & Performance | |
| Punavai Malamalama | LED paepae |
| Fa'amoemoe | LED mumu vaaia |
| Sensori | 1280 x 800 (Megapixel) |
|
I'ugafono |
3mil/ 0.075mm (1D)
7mil/ 0.175mm (2D) |
|
Field of View |
Fa'asa'o 46°
Tu'usa'o 29° |
|
Vaʻavaʻai tulimanu |
Pitch Angle ±60°
Su'e Fa'asa'o ±60° Su'ega Ta'avale 360° |
| Lolomi Fa'atusatusaga Fa'atusatusa | 20% |
|
Lele masani ole fanua (Siosiomaga: 800 lux) |
5 Mil Code39: 40 ~ 222mm |
| 13 Mil UPC/EAN: 42 ~ 442mm | |
| 15 Mil Code128: 41 ~ 464mm | |
| 15 Mil QR Code: 40 ~ 323mm | |
| 6.67 Mil PDF417: 38 ~ 232mm | |
| 10 Mil Fa'amatalaga Fa'amatalaga: 40 ~ 250mm | |
| Uiga Faaletino | |
| Fua | W21.6 x L16.1 x H11.9 mm |
| mamafa | 3.7g |
| Lanu | Lanu uliuli |
| Mea | palasitika |
| Feso'ota'i | 12 pine ZIF (pitch=0.5mm) |
| Uaea | 12 pine fe'ai uaea (pitch=0.5mm) |
| Eletise | |
| Faagaioiga Voltage | 3.3VDC ± 5% |
| Galuega i le taimi nei | <400mA |
| Standby Current | <70mA |
| Malosi maualalo i le taimi nei | 10 mA ± 5% |
| Feso'ota'i | |
|
Fa'afeso'ota'i |
UART |
| USB (HID Keyboard) | |
| USB (Virtual COM) | |
| Siosiomaga Tagata Fa'aoga | |
| Galulue Vevela | -10°C ~ 50°C |
| Teuga vevela | -40°C ~ 70°C |
| Susū | 5% ~ 95%RH (E le fa'asa'o) |
| Pa'u Malosi | 1.5M |
| Ambient Light | 100,000 Lux (Malamalama o le la) |
|
1D Faʻatusa |
UPC-A / UPC-E EAN-8 / EAN-13
Fa'ailoga 128 Fa'ailoga 39 Fa'ailoga 93 Fa'ailoga 32 Code 11 Codabar Plessey MSI Fa'atasi 2 o le 5 IATA 2 o le 5 Matrix 2 o le 5 Sa'o 2 o le 5 Pharmacode GS1 Databar GS1 Databar Fa'alautele GS1 Databar Limited Fa'ailoga Tulaga-A/B/C |
|
2D Faʻatusa |
QR Code
Micro QR Code Fa'amaumauga Fa'amaumauga |
| PDF417
MicroPDF417 Aztec MaxiCode DotCode |
|
| Fa'atonu | |
|
ESD |
Fa'atino pe a uma le 4KV fa'afeso'ota'i, 8KV ea fa'asalalau
(E manaʻomia se fale ua mamanuina mo le puipuiga o le ESD ma se ese mai le eletise.) |
| EMC | TBA |
| Faamaonia le Saogalemu | TBA |
| Si'osi'omaga | WEEE, RoHS 2.0 |
Fa'afeso'ota'i
UART Interface
Pe a faʻafesoʻotaʻi le afi faʻataʻitaʻiga i le uafu UART o se masini talimalo, o le a otometi lava le faʻaogaina o fesoʻotaʻiga UART.
O lo'o i lalo ta'iala tau feso'ota'iga fa'aletonu:
- Fua faatatau faʻasalalau: 9600
- Fa'amaumauga: 8
- Parity: Leai
- Taofi Bit: 1
- Lululima: Leai
- Taimi e pulea le tafe: Leai
- ACK/NAK: OTI
- BCC: OTI
Fa'asinomaga Fa'asinomaga Barcode:
USB HID Interface
O le fa'asalalauga o le a fa'atusaina e pei o le USB keyboard input. E maua e le Host ni ki i luga o le komepiuta virtual. E galue i luga o le Plug and Play ma e leai se avetaavale e manaʻomia.
Fa'asinomaga Fa'asinomaga Barcode:
Fa'aoga VCP USB
Afai e fesoʻotaʻi le scanner i le USB port i luga o se masini talimalo, o le USB VCP feature e mafai ai e le masini talimalo ona maua faʻamatalaga i le auala e pei ona faia e se telefoni faʻasalalau. E mana'omia se aveta'avale pe a fa'aogaina lea vaega.
Fa'asinomaga Fa'asinomaga Barcode:
Metotia Fa'agaioiga
- I le power-up, e auina atu e le MT82M faailo o le Power-Up i luga ole Buzzer ma pine LED e fai ma faʻamaoniga o le MT82M e ulufale i le Standby Mode ma ua sauni mo le faʻaogaina.
- O le taimi lava e faʻaosoina ai le MT82M e soʻo se masini poʻo se polokalama faakomepiuta, MT82M o le a tuʻuina atu se ave o le malamalama lea e ogatusa ma le vaega o le sensor o view.
- E pu'eina e le vaega o ata le ata o le barcode ma maua ai se fa'afofoga analog, o le samptaʻitaʻia ma suʻesuʻeina e le firmware decoder o loʻo taʻavale i luga o le MT82M.
- I le sologa lelei o le barcode, e tape e le MT82M ia moli malamalama, auina atu faailoilo Faitau Lelei i luga ole Buzzer ma pine LED ma faʻasalalau atu faʻamatalaga faʻasalalau i le talimalo.
Fua Fa'ainisinia
(Iunite = mm)
FA'AVAE
O le masini su'esu'e ua mamanuina fa'apitoa mo le tu'ufa'atasia i le fale o tagata fa'atau mo talosaga OEM. Peita'i, o le fa'atinoga o le afi su'esu'e o le a matua a'afia pe fa'aleagaina tumau pe a fa'apipi'i i totonu o se pa e le talafeagai.
Lapataiga: E fa'aleaogaina le fa'agata fa'apolopolo pe a le usita'ia fautuaga nei pe a fa'apipi'i le afi fa'ata.
Lapata'iga Fa'asa'o Fa'aeletise
O masini su'esu'e uma o lo'o lafo ile pusa puipui ESD ona o le natura ma'ale'ale o vaega eletise fa'aalia.
- Fa'aaoga pea fusi tapulima e fa'amauina ma se nofoaga e fa'atūina ai galuega pe a tatala ma fa'aogaina le afi su'esu'e.
- Fa'amau le afi su'esu'e i totonu o se fale ua fa'atulagaina mo le puipuiga o le ESD ma le fa'aeletise o le eletise.
Fua Fa'ainisinia
Pe a faʻamautu le afi suʻesuʻe e ala i le faʻaogaina o sikuli masini:
- Tu'u ia lava le avanoa e fa'aoga ai le lapo'a aupito maualuga o le afi fa'ata.
- Aua ne'i sili atu i le 1kg-cm (0.86 lb-in) o le malosi pe a fa'amautu le afi su'esu'e i le tagata talimalo.
- Fa'aaogā fa'ata'ita'iga saogalemu a le ESD pe a tago ma fa'apipi'i le afi fa'ata.
Mea Fa'amalama
O lo'o mulimuli mai fa'amatalaga o mea fa'amalama ta'uta'ua e tolu:
- Poly-methyl Methacrylic (PMMA)
Alyl Diglycol Carbonate (ADC) - tioata fa'afefeteina fa'ama'i
Fa'a'amea Aila (ASTM: PMMA)
O le fa'a'amea a le sela, po'o le Poly-methyl Methacrylic o lo'o fau e ala i le fa'aigoa o le acrylic i le va o le lua laupepa sa'o. O lenei mea e sili ona lelei le faʻaogaina, ae e vaivai ma faigofie ona osofaʻia e vailaʻau, faʻalavelave faʻainisinia ma le malamalama UV. O lo'o fa'atonuina malosi le fa'apipi'iina o le acrylic ma le Polysiloxane e maua ai le tete'e ma le puipuiga mai mea tau si'osi'omaga. Akrilik e mafai ona tipi leisa i foliga ese ma uelo ultrasonically.
Cell Cast ADC, Allyl Diglycol Carbonate (ASTM: ADC)
E taʻua foi o le CR-39TM, ADC, o se palasitika faʻapipiʻi vevela e masani ona faʻaaogaina mo mata tioata palasitika, e sili ona lelei vailaʻau ma le siosiomaga. E iai fo'i lona ma'a'a fa'amatagofie i luga ma o lea e le mana'omia ai
fa'alavalava malo. O lenei mea e le mafai ona faʻapipiʻiina ultrasonically.
Mata'eta'e Fa'alele Fa'amea fa'ama'i
O le tioata o se mea malo e maua ai le maoa'e lelei ma le abrasion tete'e. Ae ui i lea, o le tioata e le fa'afefeteina e malepelepe. Fa'ateleina le malosi fetu'utu'una'i fa'atasi ai ma le fa'alavelave fa'afuase'i e mana'omia ai le fa'afefeteina o vaila'au. O tioata e le mafai ona ueloina i le ultrasonic ma e faigata ona tipi i ni foliga uiga ese.
| Meatotino | Fa'amatalaga |
| Fa'aliliuga Va'e | 85% laʻititi mai le 635 i le 690 nanometers |
| mafiafia | <1 mm |
|
Ufiufi |
O itu uma e lua e faʻapipiʻiina e faʻafefeteina e tuʻuina atu ai le 1% maualuga le atagia mai le 635 i le 690 nanometers i le faʻailoga faʻamalama faʻamalama. E mafai ona fa'aitiitia le malamalama o lo'o toe fa'afo'i atu i le pusa talimalo. O le a faʻamalieina le faʻamaʻa maa
manaoga ole MIL-M-13508. |
Tuuina o Faamalama
E tatau ona fa'atulaga lelei le fa'amalama ina ia mafai ai ona ui atu le fa'amalama ma fa'alava fa'ata'ita'i i le tele e mafai ai ma leai ni ata i totonu o le afi. O se fale i totonu e le lelei le fuafuaina po'o le le sa'o o le filifilia o mea fa'amalama e mafai ona fa'aleagaina ai le fa'atinoga o le afi.
O le pito i luma o le fale afi i le pito sili ona mamao o le faamalama e le tatau ona sili atu i le a + b (a ≦ 0.1mm, b ≦ 2mm).
Tele Fa'amalama
E le tatau i le faamalama ona poloka le fanua o view ma e tatau ona lapopoa e fa'aoga ai teutusi fa'amoemoe ma fa'amalamalama o lo'o fa'aalia i lalo.
Tausiga Fa'amalama
I le itu o le faamalama, o le faʻatinoga o le MT82M o le a faʻaitiitia ona o soʻo se ituaiga o masima. O le mea lea, faʻaitiitia le faʻaleagaina o le faamalama, e iai ni nai mea e tatau ona matauina.
- Aloese mai le pa'i i le faamalama i le tele e mafai ai.
- Pe a faʻamamā le faʻamalama, faʻamolemole faʻaaoga ie e le faʻamama, ona solo lemu lea o le faamalama talimalo i le ie ua uma ona faʻafefe i le tioata mama.
TULAFONO
O le masini suʻesuʻe MT82M e ogatasi ma tulafono nei:
- Fa'a-Electromagnetic Compliance – TBA
- Fa'alavelave Electromagnetic - TBA
- Saogalemu Photobiological – TBA
- Tulafono Fa'alesiosiomaga - RoHS 2.0, WEEE
PUSA ATINAE
MB130 Demo Kit (P/N: 11D0-A020000) e aofia ai le MB130 Multi I/O Board (P/N: 9014-3100000) ma le micro USB cable. MB130 Multi I / O Board e avea o se laupapa faʻafesoʻotaʻi mo MT82M ma faʻavaveina le suʻega ma le tuʻufaʻatasia ma le polokalama talimalo. Fa'amolemole fa'afeso'ota'i lou sui fa'atau mo fa'amatalaga oka.
MB130 Tele I/O Board (P/N: 9014-3100000)
FA'UFOGA
- Fata (tele: 24.7 x 13.7 x 2.7cm): O fata ta'itasi e iai 8pcs o le MT82M.
- Pusa (tele: 25 x 14 x 3.3cm): O Pusa ta'itasi e iai le 1pc fata, po'o le 8pcs o le MT82M.
- Carton (tele: 30 x 27 x 28cm): O pusa ta'itasi o lo'o i ai 16pcs o pusa, po'o 128pcs o MT82M.
![MARSON-MT82M-Custom-Scan-engines-FIG-18]](https://manuals.plus/wp-content/uploads/2023/10/MARSON-MT82M-Custom-Scan-Engines-FIG-18-1.gif)
VERSION HISTORY
| Fai mai Rev. | Aso | Fa'amatalaga | Tuuina atu |
| 0.1 | 2022.02.11 | Fa'asalalau Fa'ata'imua | Shaw |
|
0.2 |
2022.07.26 |
Fa'afouina Fa'asologa Example, Fua Fa'atatau,
Galulue Temp. |
Shaw |
| 0.3 | 2023.09.01 | Fa'afouina Pusa Atina'e | Shaw |
|
0.4 |
2023.10.03 |
Toe fa'afouina RS232 i le UART Ave'esea le Fua Fa'ata
Fa'afouina le DOF masani, Fua, mamafa, Galulue i le taimi nei, Standby Current |
Shaw |
Marson Technology Co., Ltd.
9F., 108-3, Minquan Rd., Xindian Dist., New Taipei City, Taiwan
TELEELE: 886-2-2218-1633
FAX: 886-2-2218-6638
I-meli: info@marson.com.tw
Web: www.marson.com.tw
Pepa / Punaoa
 |
MARSON MT82M Fa'asinomaga Fa'ainisinia [pdf] Taiala mo Tagata Fa'aoga MT82M Su'esu'e Su'esu'e Inisinia, MT82M, Fa'asinomaga Su'ega Inisinia, Su'e Inisinia |
 |
MARSON MT82M Fa'asinomaga Fa'ainisinia [pdf] Tusi Taiala MT82M Su'esu'e Su'esu'e Inisinia, MT82M, Fa'asinomaga Su'ega Inisinia, Su'e Inisinia |