Beijer ELECTRONICS GT-4468 Analog Output Module
O faʻamatalaga i totonu o lenei pepa e mafai ona suia e aunoa ma se faʻaaliga ma e tuʻuina atu e avanoa i le taimi o le lolomiina. Beijer Electronics AB fa'asaoina le aia tatau e sui ai so'o se fa'amatalaga e aunoa ma le fa'afouina o lenei lomiga. E leai se matafaioi a Beijer Electronics AB mo soʻo se mea sese e ono aliali mai i lenei pepa. O exampO mea o lo'o i totonu o lenei pepa ua na'o le fa'amoemoe e fa'aleleia atili ai le malamalama i le fa'atinoga ma le fa'aogaina o masini. E le mafai e le Beijer Electronics AB ona tauaveina so'o se noataga pe afai o nei meaampo lo'o fa'aaogaina i fa'aoga moni. I totonu view of the wide range of applications for this software, users must acquire sufficient knowledge in order to ensure that it is correctly used in their specific application. Persons responsible for the application and the equipment must themselves ensure that each application is in compliance with all relevant requirements, standards, and legislation in respect to configuration and safety. Beijer Electronics AB will accept no liability for any damage incurred during the installation or use of equipment mentioned in this document. Beijer Electronics AB prohibits all modification, changes, or conversion of the equipment.
Ofisa Ulu
- Beijer Electronics AB
- Pusa 426
- 201 24 Malmö, Suetena
- www.beijerelectronics.com
- +46 40 358600
E uiga i Lenei Tusi Taiala
This manual contains information on the software and hardware features of the Beijer Electronics GT-4468 Analog Output Module. It provides in-depth specifications, guidance on the installation, setup, and usage of the product.
Fa'ailoga o lo'o Fa'aaogaina i Lenei Tusi Lesona
O lenei lomiga e aofia ai le Lapata'iga, Lapata'iga, Fa'amatalaga ma Fa'ailoga Taua pe a talafeagai ai, e fa'asino atu ai le saogalemu, po'o isi fa'amatalaga taua. O fa'ailoga tutusa e tatau ona fa'amatalaina fa'apea:
Saogalemu
A'o le'i fa'aogaina lenei oloa, faamolemole faitau ma le faaeteete lenei tusi lesona ma isi tusi lesona talafeagai. Faʻalogo atoatoa i faʻatonuga saogalemu! E leai se mea e tupu ai le Beijer Electronics e nafa pe noatia mo mea leaga e mafua mai i le faʻaaogaina o lenei oloa. O ata, exampO tusi ma ata i lenei tusi lesona o loʻo aofia ai mo faʻamoemoega faʻataʻitaʻiga. Ona o le tele o fesuiaiga ma manaʻoga e fesoʻotaʻi ma soʻo se faʻapipiʻi faʻapitoa, e le mafai e le Beijer Electronics ona ave le matafaioi poʻo le noataga mo le faʻaaogaina moni e faʻavae i luga o le ex.amples ma ata.
Fa'ailoga o oloa
O le oloa o lo'o i ai tusipasi oloa nei.
Lautele Manaomia Manaomia
LAPATAIGA
- Do not assemble the products and wires with power connected to the system.Doing so cause an “arc flash”, which can result in unexpected dangerous events(burns, fire, flying objects, blast pressure, sound blast, heat).
- Aua le pa'i i poloka fa'amau po'o fa'aoga IO pe a fa'agasolo le faiga. O le faia o lea mea e ono te'i ai le eletise, ta'avale pu'upu'u po'o le fa'aletonu ole masini.
- Aua ne'i fa'atagaina meafaitino mai fafo e pa'i i le oloa pe a fa'agasolo le faiga. O le faia o lea mea e ono te'i ai le eletise, ta'avale pu'upu'u po'o le fa'aletonu ole masini.
- Aua le tu'u le oloa i tafatafa o mea e mu. O le faia faapea e ono tupu ai se afi.
- O galuega uma uaea e tatau ona faia e se inisinia eletise.
- Pe a taulimaina modules, ia mautinoa o tagata uma, fale faigaluega ma le faʻapipiʻiina o loʻo lelei le eleele. Aloese mai le pa'i atu i vaega fa'atonu, o lo'o iai vaega fa'aeletoroni e mafai ona fa'aumatia e ala i le fa'aleaogaina o le eletise.
FAATUATUA
- Aua ne'i fa'aogaina le oloa ile si'osi'omaga e sili atu ile 60 ℃ le vevela. Aloese mai le tu'u sa'o o le la.
- Aua ne'i fa'aogaina le oloa ile si'osi'omaga e sili atu ile 90% ole susū.
- Fa'aaoga i taimi uma le oloa i totonu o si'osi'omaga o lo'o iai le fa'aleagaina o le tikeri 1 po'o le 2.
- Use standard cables for wiring
E uiga i le G-series System
Faiga i Lugaview
- Network Adapter Module – The network adapter module forms the link between the field bus and the field devices with the expansion modules. The connection to different field bus systems can be established by each of the corresponding network adapter modules, e.g., for MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc.
- Fa'alautele Module - Fa'alautele ituaiga module: Digital IO, Analog IO, ma fa'apitoa fa'apitoa.
- Feʻau - E faʻaogaina e le faiga le lua ituaiga o feʻau: Auaunaga feʻau ma IO feʻau.
IO Fa'asologa o Fa'amaumauga Fa'afanua
E tolu ituaiga o fa'amaumauga o le fa'alauteleina o fa'amaumauga: fa'amaumauga IO, fa'asologa fa'atulagaina, ma le resitala manatua. O le fesuiaiga o faʻamatalaga i le va o le fesoʻotaʻiga fesoʻotaʻiga ma le faʻalauteleina modules e faia e ala ile IO faʻasologa o ata faʻamatalaga e ala ile protocol i totonu.
Fa'asologa o fa'amaumauga i le va o feso'ota'iga feso'ota'iga (63 avanoa) ma fa'aopoopoga fa'aopoopo O fa'amaumauga o ata o lo'o tu'uina ma fa'aulufale e fa'alagolago i le tulaga fa'amau ma le ituaiga fa'amatalaga o le fa'alauteleina o fa'amaumauga. O le fa'atonuina o fa'amatalaga ata fa'aulu ma fa'aulufalega fa'atatau i le tulaga fa'alautele avanoa. O fa'atusatusaga mo lenei fa'atulagaga o lo'o aofia i totonu o tusi lesona mo feso'ota'iga feso'ota'iga ma polokalame IO e mafai ona fa'apolokalameina. Fa'amaumauga fa'amaufa'ailoga aoga e fa'alagolago i modules o lo'o fa'aogaina. Mo example, modules analog ei ai tulaga o le 0-20 mA po o le 4-20 mA, ma modules vevela ei ai tulaga e pei o PT100, PT200, ma PT500. O faʻamaumauga mo module taʻitasi e tuʻuina atu ai se faʻamatalaga o faʻamaumauga faʻamau.
Fa'amatalaga
Fa'amatalaga Si'osi'omaga
| O le vevela o galuega | -20°C – 60°C |
| UL vevela | -20°C – 60°C |
| Teuga vevela | -40°C – 85°C |
| Susū fa'atusa | 5% - 90% lē faʻapipiʻiina |
| Fa'amauina | DIN nofoaafi |
| Faiga fa'ate'ia | IEC 60068-2-27 (15G) |
| Tete'e tetete | IEC 60068-2-6 (4 g) |
| Alamanuia fa'aoso | EN 61000-6-4: 2019 |
| Puipuiga fa'apisinisi | EN 61000-6-2: 2019 |
| Tulaga fa'apipi'i | Tusa'o ma faalava |
| Fa'ailoga oloa | CE, FCC, UL, cUL |
Fa'amatalaga Lautele
| Malosi'i atu | Max. 30 mA @ 5 VDC |
| Tu'ufua | I/O i le manatu: Tu'uesea
Malosiaga fanua: Le fa'aesea |
| Malosiaga fanua UL | Sapalai voltagu: 24 VDC numera, vasega 2 |
| Malosiaga fanua | Sapalai voltage: 24 VDC nominal Voltage va'aiga: 18 – 30 VDC
Malosi fa'amama: 70 mA @ 24 VDC |
| Uaea | I/O uaea maualuga. 2.0 mm2 (AWG 14) |
| Torque | 0.8 Nm (7Ib-in) |
| mamafa | 58 g |
| Tele module | 12 mm x 99 mm x 70 mm |
Fua
Fa'amatalaga Fa'amatalaga
| Tuuina atu i le module | 8 alavai e tasi fa'ai'u, e le fa'aesea i le va |
| Fa'ailoga (itu fa'atatau) | 8 tulaga lanu meamata |
| I'uga i laina | 16 bit (include sign)
15 bits: 0.31 mV/bit |
| Faʻasologa o galuega | 0 – 10 VDC |
| Fa'asologa o fa'amaumauga | 16 bits integer (2′ fa'afetai) |
| Fa'atonu sese | ±0.1% fua atoa @ 25 ℃
±0.3 % fua atoa @ -40 °C, 70 ℃ |
| Tete'e uta | Min. 2kΩ |
| Su'esu'ega | Pepe le paoa o le fanua: Emo emo LED Malosi o le fanua: Leai se LED e pe
Malosi o le fanua: Fa'aalia le LED |
| Taimi o le liuaina | 0.2 ms / auala uma |
| Fa'avasegaina | E le mana'omia |
| Ituaiga masani | 2 masani, malosi fanua 0 V e masani (AGND) |
Ata uaea
| Pin nu. | Fa'amatalaga fa'ailoga |
| 0 | Alavai fa'atusa fa'atusa 0 |
| 1 | Alavai fa'atusa fa'atusa 1 |
| 2 | Alavai fa'atusa fa'atusa 2 |
| 3 | Alavai fa'atusa fa'atusa 3 |
| 4 | Alavai fa'atusa fa'atusa 4 |
| 5 | Alavai fa'atusa fa'atusa 5 |
| 6 | Alavai fa'atusa fa'atusa 6 |
| 7 | Alavai fa'atusa fa'atusa 7 |
| 8 | Auala fa'aaogā masani (AGND) |
| 9 | Auala fa'aaogā masani (AGND) |
Fa'ailoga LED
| LED Nu. | LED galuega / faʻamatalaga | Lanu LED |
| 0 | Auala OUTPUT 0 | Lanu meamata |
| 1 | Auala OUTPUT 1 | Lanu meamata |
| 2 | Auala OUTPUT 2 | Lanu meamata |
| 3 | Auala OUTPUT 3 | Lanu meamata |
| 4 | Auala OUTPUT 4 | Lanu meamata |
| 5 | Auala OUTPUT 5 | Lanu meamata |
| 6 | Auala OUTPUT 6 | Lanu meamata |
| 7 | Auala OUTPUT 7 | Lanu meamata |
Tulaga Alavai LED
| Tulaga | LED | Fa'ailoga |
| Fa'agaioiga masani | No output channel off
Output channel green |
Leai se galuega faatino
Tuuina atu |
| Fa'aletonu le malosi ole fanua | O ala uma e toe fai le lanu meamata ma tape | E le'o feso'ota'i le malosi o le fanua |
Fa'amatalaga Taua / Voltage
Voltage va'aiga: 0 – 10 VDC
| Voltage | 0.0 V | 2.5 V | 5.0 V | 10.0 V |
| Fa'amatalaga (Hex) | H0000 | H1FFF | H3FFF | H7FFF |
Fa'afanua Fa'amaumauga Mai le Laulau Ata
Fa'atauga ata
| Bit no. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Byte 0 | Fa'atusa fa'atusa Ch 0 paita maualalo | |||||||
| Byte 1 | Fa'atusa fa'atusa Ch 0 paita maualuga | |||||||
| Byte 2 | Fa'atusa fa'atusa Ch 1 paita maualalo | |||||||
| Byte 3 | Fa'atusa fa'atusa Ch 1 paita maualuga | |||||||
| Byte 4 | Fa'atusa fa'atusa Ch 2 paita maualalo | |||||||
| Byte 5 | Fa'atusa fa'atusa Ch 2 paita maualuga | |||||||
| Byte 6 | Fa'atusa fa'atusa Ch 3 paita maualalo | |||||||
| Byte 7 | Fa'atusa fa'atusa Ch 3 paita maualuga | |||||||
| Byte 8 | Fa'atusa fa'atusa Ch 4 paita maualalo | |||||||
| Byte 9 | Fa'atusa fa'atusa Ch 4 paita maualuga | |||||||
| Byte 10 | Fa'atusa fa'atusa Ch 5 paita maualalo | |||||||
| Byte 11 | Fa'atusa fa'atusa Ch 5 paita maualuga | |||||||
| Byte 12 | Fa'atusa fa'atusa Ch 6 paita maualalo | |||||||
| Byte 13 | Fa'atusa fa'atusa Ch 6 paita maualuga | |||||||
| Byte 14 | Fa'atusa fa'atusa Ch 7 paita maualalo | |||||||
| Byte 15 | Fa'atusa fa'atusa Ch 7 paita maualuga | |||||||
Faʻamatalaga faʻamatalaga faʻapipiʻi - 16 byte faʻamatalaga faʻamatalaga
| Tala fa'atusa Ch 0 |
| Tala fa'atusa Ch 1 |
| Tala fa'atusa Ch 2 |
| Tala fa'atusa Ch 3 |
| Tala fa'atusa Ch 4 |
| Tala fa'atusa Ch 5 |
| Tala fa'atusa Ch 6 |
| Tala fa'atusa Ch 7 |
Fa'amatalaga Parameter
Umi ta'otoga aoga: 4 paita
| Bit no. | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
| Byte 0 | Fa'aletonu mo le alalaupapa 3 | Fa'aletonu mo le alalaupapa 2 | Fa'aletonu mo le alalaupapa 1 | Fa'aletonu mo le alalaupapa 0 | ||||
| 00: Fa'aletonu le tau / 01: Taofi le tulaga mulimuli / 10: Fa'atapula'a maualalo / 11: Tapula'a maualuga | ||||||||
| Byte 1 | Fa'aletonu mo le alalaupapa 7 | Fa'aletonu mo le alalaupapa 6 | Fa'aletonu mo le alalaupapa 5 | Fa'aletonu mo le alalaupapa 4 | ||||
| Byte 2 | Fa'aletonu le tau maualalo paita | |||||||
| Byte 3 | Fa'aletonu le tau maualuga byte | |||||||
Seti Meafaigaluega
FAATUATUA
- Faitau i taimi uma lenei mataupu aʻo leʻi faʻapipiʻi le module!
- vevela luga! E mafai ona vevela le pito i luga ole fale ile taimi ole gaioiga. Afai e fa'aoga le masini i le maualuga o le vevela, tu'u pea le masini e mālūlū a'o le'i tago i ai.
- O le galue i masini fa'amalosi e mafai ona fa'aleagaina ai masini! Tape i taimi uma le paoa a'o le'i galue i le masini.
Avanoa Manaomia
O ata nei o lo'o fa'aalia ai avanoa avanoa pe a fa'apipi'i le G-series modules. O le avanoa e maua ai le avanoa mo le fa'avevela ma taofia ai fa'alavelave fa'aeletonika fa'atautaia mai le a'afiaina o le ta'aloga. O le tulaga fa'apipi'i e aoga i luga ma fa'alava. O ata e fa'ata'ita'i ma e ono le fa'atatau.
FAATUATUA
LE le mulimulitaia o avanoa e mana'omia e ono i'u ai i le fa'aleagaina o le oloa.
Mauga Module i le DIN Rail
O mataupu o loʻo mulimuli mai o loʻo faʻamatalaina pe faʻafefea ona faʻapipiʻi le module i le DIN rail.
FAATUATUA
O le module e tatau ona faʻapipiʻi i le DIN rail faʻatasi ai ma le loka loka.
Mauga GL-9XXX poʻo GT-XXXX Module
O fa'atonuga nei e fa'atatau i nei ituaiga module:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
GN-9XXX modules e tolu loka loka, tasi i le pito i lalo ma le lua i le itu. Mo faʻatonuga faʻapipiʻi, vaʻai ile Mount GN-9XXX Module.
Mauga GN-9XXX Module
To mount or dismount a network adapter or programmable IO module with the product nameGN-9XXX, for example GN-9251 poʻo le GN-9371, vaʻai i faʻatonuga nei:
Mauga Aveese Aveese Poloka Terminal
Ina ia fa'apipi'i pe fa'ae'e se poloka fa'amau e mafai ona aveese (RTB), va'ai fa'atonuga o lo'o i lalo.
Fa'afeso'ota'i Uaea ile Poloka Fa'amau e Ave'esea
Ina ia fa'afeso'ota'i/ motusia uaea i/mai le poloka fa'amau e mafai ona aveese (RTB), va'ai fa'atonuga o lo'o i lalo.
LAPATAIGA
Fa'aaoga i taimi uma le sapalai fautuaina voltagu ma taimi e puipuia ai le faaleagaina o meafaigaluega ma mautinoa lelei le faatinoga.
Malosi o fanua ma pine fa'amaumauga
Feso'ota'iga i le va o le feso'ota'iga feso'ota'iga G-series ma le fa'alauteleina o le module, fa'apea fo'i ma le fa'aogaina o le eletise o le fa'aogaina o le pasi e fa'atinoina e ala i le pasi totonu. E aofia ai 2 Field Power Pins ma 6 Data Pins.
LAPATAIGA
Aua ne'i pa'i i fa'amaumauga ma pine mana o le fanua! O le pa'i e mafai ona i'u ai i le palapala ma le fa'aleagaina e le pisa ESD.
| Pin nu. | Igoa | Fa'amatalaga |
| P1 | VCC faiga | Sapalai faiga voltage (5 VDC) |
| P2 | System GND | Eleele faiga |
| P3 | Token output | Fa'ailoga fa'ailoga uafu o le fa'apipi'i module |
| P4 | Fa'asologa fa'asologa | Transmitter uafu galuega faatino o le module processor |
| P5 | Fa'asinomaga fa'asologa | Receiver input port of processor module |
| P6 | Fa'apolopolo | Fa'apolopolo mo fa'ailoga e pasi |
| P7 | fanua GND | fanua fanua |
| P8 | VCC fanua | Sapalai fanua voltage (24 VDC) |
FAQ
- Q: What should I do if I encounter an error while using theGT-4468 Analog Output Module?
- A: Check the troubleshooting section in the manual for guidance on resolving common issues. If the problem persists, contact customer support for assistance.
Pepa / Punaoa
 |
Beijer ELECTRONICS GT-4468 Analog Output Module [pdf] Tusi Taiala GT-4468, GT-4468 Analog Output Module, Analog Output Module, Output Module, Module |