SENTIOTEC FTS2 Humidity Temperature Sensor Instruction Manual

HUMIDITY- TEMPERATURE SENSOR FTS2

Installation may only be performed by a qualified electrician or similarly qualified person.

1. Arrangement:

---

1. Heater sensor F1 in the area above the heating system
2. Humidity- Temperature sensor FTS2
3. Heating system Evaporator

1. white (red)
2. yellow (orange)
3. green
4. brown
5. grey (black)

2. Installation:

---

1. Step: Drill a hole Ø 30 – 40 mm in the middle of a cabin wall panel. Keep 150 mm distance to the ceiling.

2. Step: Pull the connecting line (5-wire) coming from the control unit through the hole from the outer side of the cabin. Connect the wires with the clamps, put it back through the hole and fix the sensor case.

1. 2 wood screws 4 x 16

3. Connection:

---

PRO-series

1. brown
2. grey (black)
3. green
4. yellow (orange)
5. white (red )

wave.com4 11kW

sw …. grey (black)
br ….. brown
gn …. green
or ….. yellow (orange)
rt …… white (red)

FTS2
sw	br	gn	or	rt
F2		WC4-H-H
ws	ws	br	bl	ge/gn

home.com4

1. green
2. yellow (orange)
3. grey (black)
4. brown
5. white (red)

Version 10/24                              1-043-927

Documents / Resources

SENTIOTEC FTS2 Humidity Temperature Sensor [pdf] Instruction Manual FTS2, 1-043-927, FTS2 Humidity Temperature Sensor, FTS2, Humidity Temperature Sensor, Temperature Sensor

References

• User Manual