inateck-LOGO

inateck KB06103 ڪي بورڊ

inateck-KB06103-ڪي بورڊ-PRODUCT

پيداوار جو خاڪو

inateck-KB06103-Keyboard-FIG-1

پاور آن / آف

  • Power On: Slide to ON, the Bluetooth indicator lights up.
  • Power Off: Slide to OFF, the Bluetooth indicator turns off.

بلوٽوٽ جوئر

  • قدم 1: For the first use, place the iPad on the stand and slide the power switch to the On position, and then KB06103 will automatically enter Bluetooth Channel 1 pairing mode (Default mode).
    To enter the Bluetooth pairing mode for future use, you can also try the following steps: which means that Bluetooth pairing is completed.
  • رکوinateck-KB06103-Keyboard-FIG-2 simultaneously for 3 seconds. When the Bluetooth indicator flashes in blue rapidly, it means KB06103 is in Bluetooth Channel 1 pairing mode.
  • رکوinateck-KB06103-Keyboard-FIG-3 simultaneously for 3 seconds. When the Bluetooth indicator flashes in orange rapidly, it means KB06103 is in Bluetooth Channel 2 pairing mode.
  • رکوinateck-KB06103-Keyboard-FIG-4 simultaneously for 3 seconds. When the Bluetooth indicator flashes green rapidly, it means KB06103 is in Bluetooth Channel 3 pairing mode.
  • قدم 2: On the iPad, select Settings>Bluetooth>On, and then “Inateck KB06103” will show up in “Other Devices”.
  • قدم 3: Tap “Inateck KB06103” to pair it with your iPad, and then the Bluetooth indicator will stay solid in seconds, which means that Bluetooth pairing is completed.

نوٽ
پنهنجو iPad سيٽ اپ ڪريو:
For a better user experience, please follow the steps below to set up your iPad at first use once Bluetooth pairing is completed (using iPadOS 17 and above versions as an example). ڪنهن به سوالن لاء، اسان سان رابطو ڪرڻ لاء آزاد محسوس ڪريو.

  • وڃو سيٽنگون> جنرل> ٽريڪ پيڊ ۽ سلائڊر کي ڇڪيو ٽريڪنگ جي رفتار جي وچ ۾.
  • Go to Settings > General > Trackpad and turn on “Tap to Click” and “Two-Finger Secondary Click”.
  • سيٽنگون ڏانهن وڃو> رسائي> ٽچ ۽ بند ڪريو "اسسٽنٽ ٽچ" کي.
  • Go to Settings > Multitasking & Gestures and turn on “Four & Five Finger Gestures”.
  • Go to Settings > Accessibility Keyboards and turn off “Full Keyboard Access”.

اختياري سيٽنگون

  • Caps Lock کي روڪڻ لاءِ قدم پنھنجي ڪيبورڊ جي ٻولي تبديل ڪرڻ:
  • سيٽنگون ڏانهن وڃو> جنرل> ڪي بورڊ> هارڊويئر ڪي بورڊ ۽ بند ڪريو ٻوليون تبديل ڪريو Caps Lock استعمال ڪندي
  • Steps to disable the double-tap period shortcut:
  • Go to Settings > General > Keyboard > Hardware Keyboard and click the switch to turn on. Shortcut.
  • ايموجي ڏيکارڻ لاءِ گلوبل ڪيئي استعمال ڪندي غير فعال ڪرڻ جا قدم:
  • Go to Settings > General > Keyboard > Hardware Keyboard and turn off “Press the Global Key for Emoji”.

بلوٽوٿ جوڙڻ جا مسئلا حل ڪريو

  • قدم 1: سيٽنگون> بلوٽوٿ ڏانھن وڃو، منھنجي ڊوائيسز ۾ "Inateck KB06103" ڳولھيو ۽ ڄاڻ واري بٽڻ تي ٽيپ ڪريو.inateck-KB06103-Keyboard-FIG-5 ان جي اڳيان، پوء ٽيپ ڪريو هن ڊوائيس کي وساريو. جيڪڏھن ڪي بورڊ سان لاڳاپيل گھڻا ڳنڍڻ وارا رڪارڊ آھن، مھرباني ڪري انھن سڀني کي صاف ڪريو.
  • قدم 2: رکوinateck-KB06103-Keyboard-FIG-6 simultaneously for 3 seconds and then all four indicators will blink for 3 times once the factory reset is completed.
  • قدم 3: Pair it with your Inateck KB06103.

iPad OS Multi-Touch Gestures

inateck-KB06103-Keyboard-FIG-7

Touchpad Area Numeric Keypad On/Off

  • Enable Numeric Keypad: Double-tap the NumLock area on the touchpad twice, and the indicator 1 will stay green.
  • Disable Numeric Keypad: Double-tap the NumLock area on the touchpad twice to turn it off, and the indicator 1 will turn off.

نوٽ: If there is no numeric input within 60 seconds, the numeric keypad function will be disabled ¡and the touchpad function will automatically switch on, with the numeric keypad indicator turning off.

ڪيبورڊ جي پٺڀرائي کي ترتيب ڏيو

  1. رکوinateck-KB06103-Keyboard-FIG-8 ساڳئي وقت backlight رنگ کي ترتيب ڏيڻ لاء. مجموعي طور تي 7 رنگ موجود آهن.
  2. رکوinateck-KB06103-Keyboard-FIG-9 ساڳئي وقت backlight جي روشني کي ترتيب ڏيڻ لاء. 3 سطحون توھان جي پسند تي آھن.

شارٽ ڪٽ ڪيز

inateck-KB06103-Keyboard-FIG-10

عام ڪي بورڊ شارٽ ڪٽ

inateck-KB06103-Keyboard-FIG-11

How to Use on Windows

ڪيئن استعمال ڪجي F1-F12
The default function of F1-F12 is a shortcut and multimedia functions.

  • توهان دٻائي سگهو ٿاinateck-KB06103-Keyboard-FIG-12 فعال/غير فعال ڪرڻ لاءِinateck-KB06103-Keyboard-FIG-13 تالا. (ڪي بورڊ غير فعال ڪري ٿوinateck-KB06103-Keyboard-FIG-13 ڊفالٽ طور بند ڪريو.)
  • جڏهن Fn لاک فعال ٿئي ٿو:
  • دٻايوinateck-KB06103-Keyboard-FIG-14 can trigger the functionality owned byinateck-KB06103-Keyboard-FIG-14 جيئن تهinateck-KB06103-Keyboard-FIG-15 refresh function on Windows. The battery indicator light will flash twice quickly; if En lock is turned off, the indicator will not flash.
  • To use shortcut and multimedia functions, pressinateck-KB06103-Keyboard-FIG-13 + F key, e.g.,inateck-KB06103-Keyboard-FIG-16 to decrease screen brightness.
  • This method applies to all F keys (F1-F12).
  • جڏهن Fn لاڪ غير فعال آهي (ڊفالٽ اسٽيٽس):
  • مثال طورample, pressing F5 will take a screenshot; if you pressinateck-KB06103-Keyboard-FIG-17, it will trigger the F5 refresh function.

Fn ۽ ٻين ڪنجين جو ميلاپ

inateck-KB06103-Keyboard-FIG-18

الف فنڪشن

  • On Windows devices, theinateck-KB06103-Keyboard-FIG-19 can be used to wake up Inateck Origin, a software that supports AI translation, AI chat, and other functions.
  • You can search for Inateck Origin in the Microsoft Store to download it.

مختصر دٻايوinateck-KB06103-Keyboard-FIG-19

  1. If no text is copied, it will activate the AI chat.
  2. جيڪڏهن متن نقل ڪيو ويو آهي، اهو AI ترجمو کي چالو ڪندو.

LED اشارو

inateck-KB06103-Keyboard-FIG-20

فيڪٽري ڊفالٽ بحال ڪريو

  • رکوinateck-KB06103-Keyboard-FIG-21 for 3 seconds, and then the four indicators will blink four 3 times once the factory reset is completed.

بيٽري جي سطح چيڪ ڪريو

  • رکوinateck-KB06103-Keyboard-FIG-22 ڳاڙهي بيٽري جي اشاري جي چمڪندڙ تعدد مطابق بيٽري جي سطح کي جانچڻ لاء.

inateck-KB06103-Keyboard-FIG-23

چارج ڪرڻ

  • When the battery level is under 20%, the battery indicator will blink red.
  • You can connect the included USB cable to recharge the keyboard.
  • تجويز ڪيل چارجنگ حجمtage 5V آهي.
  • The keyboard will fully charge in 3.5 hours.
  • The red battery indicator will stay solid red when the keyboard is charging.
  • Once it’s fully charged, the battery indicator turns green.

سمهڻ جو موڊ

  1. When KB06103 is left idle for 10 seconds, he backlight will automatically turn off.
  2. When KB06103 is left idle for 10 minutes, it will enter sleep mode, and the Bluetooth connection will be disrupted. The connection can be rebuilt with a press of any key.

نوٽ: Pressing the touchpad cannot wake up the keyboard.

پيداوار جي وضاحت

  • بلوٽوت ورزن: V5.3
  • بلوٽوت جي حد: 10 م
  • چارج وقت: 3.5h
  • Continuous Working Time (Backlight On): About 26h
  • Continuous Working Time (Backlight Off): About 175h
  • آپريٽنگ گرمي پد: -10 C ~ +55 ° C
  • Bluetooth Frequency Range: 2402- 2480 MHz
  • Actuation Force: 60± 10g
  • بيٽري جي گنجائش: 2600mAh

Keyboard Stand Usage

  1. Slide out the stand on the back until it reaches the limit position.inateck-KB06103-Keyboard-FIG-25
  2. Rotate the stand support block to the limit position.inateck-KB06103-Keyboard-FIG-26
  3. Place the tablet or phone on the stand. Note: Do not apply excessive force to the stand components to avoid exceeding the load-bearing capacity.

inateck-KB06103-Keyboard-FIG-27

پيڪنگ جي فهرست

  • KB06103*1
  • چارجنگ ڪيبل*1
  • يوزر مينوئل *1

ايف سي سي جو بيان

ايف سي سي نوٽ
هي ڊوائيس FCC ضابطن جي حصو 15 جي مطابق آهي. آپريشن هيٺ ڏنل ٻن شرطن جي تابع آهي:

  1. هي ڊوائيس نقصانڪار مداخلت جو سبب نه ٿي سگھي، ۽
  2. هن ڊوائيس کي ڪنهن به مداخلت قبول ڪرڻ گهرجي، جنهن ۾ مداخلت شامل آهي جيڪا شايد ناپسنديده آپريشن سبب ٿي سگهي ٿي.

نوٽ: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the Users, may cause harmful interference to radio communications.
بهرحال، ڪا به ضمانت نه آهي ته مداخلت ڪنهن خاص تنصيب ۾ نه ٿيندي. جيڪڏهن هي سامان ريڊيو يا ٽيليويزن جي استقبال لاء نقصانڪار مداخلت جو سبب بڻائيندو آهي، جيڪو سامان کي بند ڪرڻ ۽ بند ڪرڻ سان طئي ڪري سگهجي ٿو، صارف کي حوصلا افزائي ڪئي ويندي آهي مداخلت کي درست ڪرڻ جي ڪوشش ڪرڻ جي هيٺيان قدمن مان هڪ يا وڌيڪ:

  • وصول ڪندڙ اينٽينا کي ٻيهر ترتيب ڏيو يا منتقل ڪريو.
  • سامان ۽ وصول ڪندڙ جي وچ ۾ علحدگي کي وڌايو.
  • سامان کي ھڪڙي سرڪٽ تي ھڪڙي آئوٽليٽ سان ڳنڍيو جنھن کان رسيور ڳنڍيل آھي.
  • مدد لاءِ ڊيلر يا تجربيڪار ريڊيو/ٽي وي ٽيڪنيشن سان صلاح ڪريو.

نوٽ: گرانٽي ڪنهن به تبديلين يا ترميمن جي ذميوار نه آهي جيڪا واضح طور تي پارٽي طرفان منظور نه ڪئي وئي جيڪا تعميل جي ذميوار آهي. اهڙيون تبديليون صارف جي اختيار کي ختم ڪري سگھن ٿيون جيڪي سامان کي هلائڻ لاء.
ڊوائيس عام آر ايف جي نمائش جي ضرورتن کي پورا ڪرڻ لاء جائزو ورتو ويو آهي.
هي سامان FCC جي آر ايف تابڪاري جي نمائش جي حدن جي تعميل ڪري ٿو جيڪي هڪ غير ڪنٽرول ٿيل ماحول لاءِ مقرر ڪيون ويون آهن. هي ڊوائيس ۽ ان جو اينٽينا (ن) گڏجي يا ڪنهن ٻئي اينٽينا يا ٽرانسميٽر سان گڏ نه هجڻ گهرجن.

بيٽري جي حفاظت جي خبرداري:
This product contains a built-in rechargeable lithium battery. Please observe the following safety precautions:
Do not dismantle, hit, crush, or expose the battery to fire. If the battery experiences severe swelling, discontinue use immediately. Avoid placing the battery in high-temperature environments, and do not use it if it has been immersed in water. During transportation, do not mix the battery with metallic objects.

چارجنگ احتياطي تدبيرون/لادين وائيس

  • چارجر پاران فراهم ڪيل طاقت ريڊيو سامان جي گھربل گھٽ ۾ گھٽ [0.175] واٽ جي وچ ۾ هجڻ گھرجي، ۽ وڌ ۾ وڌ [1.75] واٽ جي وڌ ۾ وڌ چارج ڪرڻ جي رفتار حاصل ڪرڻ لاءِ.

inateck-KB06103-Keyboard-FIG-28

EU جي مطابقت جو اعلان

  • Inateck Co., Ltd. ھتي اعلان ڪري ٿو ته ھي ڊوائيس ھدايت 2014/53/EU جي تعميل ڪري ٿو.
  • مطابقت جي اعلان جي هڪ ڪاپي تائين رسائي ٿي سگهي ٿي https://www.inateck.de/pages/inateck-euro-compliance.

inateck-KB06103-Keyboard-FIG-29

سروس سينٽر

يورپ

  • F&M ٽيڪنالاجي GmbH
  • ٽيليفون: +49 341 5199 8410 (ڪم جو ڏينهن 8 AM - 4 PM CET)
  • فيڪس: +49 341 5199 8413
  • ائڊريس: Fraunhoferstraße 7, 04178 Leipzig, Deutschland

اتر آمريڪا

  • Inateck Technology Inc.
  • ٽيليفون: +1 (909) 698 7018 (ڪم جو ڏينهن 9 AM - 5 PM PST)
  • ائڊريس: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA

F&M ٽيڪنالاجي GmbH

  • Fraunhoferstraße 7، 04178 Leipzig، Deutschland
  • ٽيليفون: +49 341 5199 8410
  • اي ميل: service@inateck.com
  • پوسٽل ڪوڊ: 04178

Inateck Technology (UK) Ltd.

  • 95 هاءِ اسٽريٽ، آفيس بي، عظيم مسينڊن، يونائيٽيڊ
  • ڪنگڊم، HP16 OAL
  • ٽيليفون: +44 20 3239 9869

ٺاهيندڙ

  • Shenzhen Inateck ٽيڪنالاجي ڪمپنيء، ل.
  • ائڊريس: سوٽ 2507، بلاڪ 11 ٽان اين ڪلائوڊ پارڪ ۾، بينٽين
  • گهٽي، Longgang ضلعي، Shenzhen، Guangdong، چين
  • اي ميل: product@licheng-tech.com
  • پوسٽل ڪوڊ: 518129

دستاويز / وسيلا

inateck KB06103 ڪي بورڊ [pdf] هدايت نامو
KB06103، 2A2T9-KB06103، 2A2T9KB06103، KB06103 ڪي بورڊ، KB06103، ڪي بورڊ

حوالو

تبصرو ڇڏي ڏيو

توهان جو اي ميل پتو شايع نه ڪيو ويندو. گهربل فيلڊ نشان لڳل آهن *