CR-UMMB USB 3.0 Flash Memory Card Reader
User Manual 

Sabrent 2-Slot Micro USB OTG and USB 3.0 Flash Memory Card Reader

1. Connect the is a device to Mac or PC through a USB port
   
2. Connect with the Featured 0TG device the Pease n through micro USB

This device can only read one card at a time.

At this point, the USB 3.0 Flash Memory Card Reader is
completely installed — no software drivers are needed to
complete the installation.
Thank you for choosing Sabrent and enjoy!
For installation issues please contact:
Support@Sabrent.com

Documents / Resources

Sabrent CR-UMMB USB 3.0 Flash Memory Card Reader [pdf] User Manual CR-UMMB, CARD READER, Memory Card Reader, USB 3.0 CARD READER

References

• User Manual