CR-UM4C

CR-UM4C USB 3.0 AND USB TYPE-C TO MICRO SD AND SD CARD READER

USB 3.0 AND USB TYPE-C TO
MICRO SD AND SD CARD READER 

For Laptop or Computer Has Type-C Ports

1. Plug the card reader into the USB Type-C port of your computer or laptop — USB and USB Type-C options are on opposite ends of the Card Reader.
2. Insert card or cards into Card Reader Slot. Please note: This device can only read one memory card at a time.

For Laptop or Computer Has USB Ports

1. Plug card reader into the USB port of your computer or laptop — USB and USB Type-C options are on opposite ends of the Card Reader.
2. Insert card or cards into Card Reader Slot. Please note: This device can only read one memory card at a time.

Enjoy!
At this point, the USB 3.0 and USB Type-C to Micro SD and SD card reader is completely installed — no software drivers are needed to complete the installation.
Thank you for choosing Sabrent and enjoy!
For installation issues please contact: Support@Sabrent.com

Documents / Resources

Sabrent CR-UM4C USB 3.0 AND USB TYPE-C TO MICRO SD AND SD CARD READER [pdf] User Manual CR-UM4C, CARD READER, USB CARD READER, SD CARD READER

References

• User Manual