Sabrent-logo

Sabrent HB-MACR USB 3.0 Hub Card ReaderSabrent-HB-MACR-USB-3-0-Hub-Card-Reader-Product

Product OverviewSabrent-HB-MACR-USB-3-0-Hub-Card-Reader-fig-1

  1. Connect USB Hub to Mac or PCSabrent-HB-MACR-USB-3-0-Hub-Card-Reader-fig-2
  2. Insert SD/Micro SD/CF/ USB Device into Card Reader
    Please note:
    This device can only read one card at a time.

ENJOY

At this point, the USB 3.0 Hub is completely installed– no software drivers are needed to complete the installation. Thank you for choosing Sabrent and enjoy!

Sabrent-HB-MACR-USB-3-0-Hub-Card-Reader-fig-3

Documents / Resources

Sabrent HB-MACR USB 3.0 Hub Card Reader [pdf] User Guide
HB-MACR USB 3.0 Hub Card Reader, HB-MACR, USB 3.0 Hub Card Reader, Card Reader

References

Leave a comment

Your email address will not be published. Required fields are marked *