How do I replace a deformed filter and where can I get a new one?
To replace the filter on your Johgee Smart Water Timer, follow these steps: Removal: The filter is located inside the water inlet (the hose…
Manuals+ Q&A
Timer questions & answers
Browse answered questions about Timer, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsWhere can I purchase descaling solution for the Melitta Look Therm Timer and how do I contact customer support?
For your Melitta Look Therm Timer, the manufacturer recommends using Melitta Anti Calc Filter Café Machines liquid descaler. You can typically find these accessories…
The battery light is flashing but no water is coming out.
If the LED light is flashing and no water is being released, please check the following troubleshooting steps based on the manual: Check the…
Can I mount the timer horizontally under the eaves of the house?
No, the Touch Smart timer Plug-in Timer must be mounted in a vertical position with the outlets facing downwards. It should also be at…
How do I change the Wi-Fi network password for the hub?
To change the Wi-Fi network or password for your johgee Smart Dual Water Timer hub, you must reset the hub and re-pair it within…
How can I order another Parkside PBCG B2 Programmable Watering Timer online?
Parkside products, including the PBCG B2 Programmable Watering Timer, are primarily sold through Lidl stores and their official online shop (lidl.hr or lidl.de, depending…
Where can I purchase a replacement hose tap connector for the Orbit 56619 timer?
The Orbit 56619 Hose Faucet Timer uses a standard threaded hose tap connection. While the manual does not list individual part numbers for the…
My arrival laser is not working and shows 'err2'. What can I do?
The user manual for the Dongguan Xuanying Sports Technology S-001 Single Version Wireless Laser Timer does not specifically mention an 'err2' error code. However,…
What should I do if my Johgee Smart Water Timer inlet separates and causes a leak?
We are sorry to hear about the failure of your Johgee Smart Water Timer. Please note that Manuals+ is an independent repository for product…
Why does valve 1 stay on when I log out of the app or turn off Bluetooth on my Insoma SGW08?
If valve 1 remains on when you disconnect, it is likely because a manual watering cycle was initiated or there is a physical obstruction.…
How do I program zones 3 and 4 on the Holman CO6002 Dual Outlet Tap Timer?
The Holman CO6002 QuikDial is a Dual Outlet tap timer, meaning it only has two physical water outlets (ZONE I and ZONE II). It…
Why does the manual start timestamp in the Smart Life/Tuya app show two hours in the future?
The issue you are experiencing with the timestamp being two hours ahead is likely related to a time zone synchronization mismatch between the device,…
Is it necessary to use both outlets on the Orbit 56544 timer if I only need one hose?
No, it is not necessary to have both stations hooked up to a hose. You can use only one outlet (Station 1 or Station…
Why is my BN-LINK SU101D timer switch not turning off the lights at the programmed time (5:30 AM) even though it works manually?
If your BN-LINK SU101D timer is not turning off at the scheduled time, please check the following common causes: Operating Mode: Ensure the timer…
Why is my Gill Marine W016 Stealth Timer not responding to button presses or allowing menu navigation?
Based on the Gill Marine W016 Stealth Timer manual, there are several reasons why your watch may appear unresponsive or unable to navigate the…
How can I get a replacement remote control for my LUCORB workout timer and what is the cost?
For replacement parts such as a remote control, you should contact LUCORB customer service directly. According to the manual, they handle all warranty and…
Why does my Aqua Control C4111 irrigation timer restart the cycle multiple times even though it is set to once per day?
If your Aqua Control C4111 is repeating cycles despite being set to once a day (24 hours), please verify the following settings in the…
Can the Dewenwils HIDT12W in-wall digital timer be used in a three-way installation?
Based on the provided instruction manual, the Dewenwils HIDT12W is designed for single-pole installations and does not appear to support three-way wiring. The wiring…
How can I reset or restart this machine?
The provided manual for the AVATTO SWT60E Smart Irrigation Timer does not contain specific instructions on how to reset or restart the device. It…
How do I program the Noma 152 2716 4 indoor digital timer?
Based on the Noma Indoor Digital Timer manual, here are the steps to program your device: Initial Reset: Press the "R" button with a…
How can I retrieve or remove the battery compartment of the RainPoint ITV101P?
To access or retrieve the battery compartment on the RainPoint ITV101P, follow these steps based on the product design: Locate the battery tray on…
How do I operate the Shooters Global SG Timer 2? Please provide instructions in Japanese.
Shooters Global SG Timer 2の基本的な操作方法は以下の通りです。 電源のオン/オフ: タイマーの左側中央にある「START/STOP」ボタン（「O」の記号が付いているボタン）を2秒間長押しします。 計測の開始/終了: 「START/STOP」ボタンを短く押すと、音検知（ショット計測）の開始および終了ができます。 アプリとの連携: Google PlayまたはApp Storeから「Drills: Training application」をダウンロードします。 スマートフォンのBluetoothをオンにし、アプリに権限を許可します。 アプリ内の「Settings（設定）」から「Bluetooth Devices（Bluetoothデバイス）」を選択し、タイマーを接続します。 ファームウェアの更新: 「Drills」アプリに接続した際、更新がある場合は「update」ボタンが表示されます。 本体には、上部に「UP（上）」ボタン、中央に「START/STOP」ボタン、下部に「DOWN（下）」ボタンが配置されています。
Does the valve open for horizontal connection?
Based on the Hozelock 2700 AC Plus manual, the device is designed to be connected directly to a mains water tap. While the manual…
Why does my Clocky alarm clock not let me change the 12-hour mode or see the AM/PM indicator?
If your Clocky is not responding when you try to change the time format or view the AM/PM indicator, please ensure you are following…