How do I fix my Clocky if the hours and minutes buttons are not responding when trying to set the time?
If your Clocky is not allowing you to change the hours or minutes, please try the following troubleshooting steps based on the official manual…
Manuals+ Q&A
Timer questions & answers
Browse answered questions about Timer, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsWhy is my Noma Weekly timer 052-8814-2 not turning on and why am I unable to set the clock?
Based on the manual for the Noma Digital Timer, here are the steps to troubleshoot a device that will not turn on or has…
How can I keep the Clocky display screen lit up all the time?
Based on the Clocky instruction manual and official support documentation, the display screen is designed to be backlit only temporarily when a button is…
How do you operate two HCT-636-HCG-003 water timers that are 20 meters apart?
To operate two HCT-636-HCG-003 water timers that are 20 meters apart, you can connect both to a single Sub-GHz Gateway using the Tuya Smart…
How can I open the battery compartment if the screws are stripped or stuck?
We are sorry to hear that you are experiencing difficulty with the battery compartment screws on your Clocky. Because Manuals+ is a repository for…
How can I manually start a 10-minute watering session on the AMICO 2 tap timer?
Yes, the AMICO 2 irrigation timer has a manual start function that allows you to water for a specific duration at any time. Follow…
How can I purchase the S-001 Single Version Wireless Laser Timer and obtain an invoice?
Manuals.plus is a repository for product manuals and does not sell products or issue invoices directly. To purchase the S-001 Single Version Wireless Laser…
Why is the display on my MTD7 20 timer blank even after charging and resetting?
If the display on your Major Tech MTD7 20 remains blank after charging and resetting, please consider the following steps: Charging Time: While the…
Why does water continue to flow from the second outlet after the first outlet's program finishes, even when the second outlet is set to off?
Based on the Johgee Smart Water Timer manual, if water continues to flow from an outlet that is set to 'off' or after a…
Can I control the Orbit HT34ASR timer through Wi-Fi with a hub, and which hub is required?
Yes, you can control your Orbit HT34ASR B-hyve XD Timer via Wi-Fi if you use a compatible hub. While the timer itself uses Bluetooth…
Is it possible to irrigate twice a day for each zone?
Yes, it is possible to irrigate multiple times per day. The Diivoo WT-02 features 3 separate watering programs (P1, P2, and P3) that can…
Where can I find the manual for Noma timer model 052-8870-6 and how do I reprogram it?
While the specific manual for model 052-8870-6 is not currently hosted on this page, Noma digital timers often share a similar programming logic. You…
How do I set the 9-second long ring alarm on the Taylor 5830 timer?
Based on the user guide for the Taylor Dual Event Timer, there is no specific setting to toggle between different alarm lengths or a…
How do I change the time zone on my Sharper Image Travel Alarm Clock?
The Sharper Image Travel Alarm Clock relies on a radio signal (WWVB) to set the time, but the Time Zone must be manually selected…
How do I change Clocky to 12-hour mode or see the AM/PM indicator?
To change the time format on your Clocky, follow these steps: Switching between 12 and 24-hour mode: Press and hold the 't' button for…
How do I program station 5 and stop the timer from repeating the cycle after station 4?
Based on the Orbit Easy-Set Logic™ manual, here is how to address your two issues: 1. Programming Station 5 To set a run time…
How do I fix my Orbit B-hyve 57946 controller after a software update caused it to stop watering and lose Wi-Fi connectivity?
It appears your controller is experiencing a synchronization or firmware error where the software believes a cycle is running, but the hardware is not…
How do I manually run all sprinkler stations for a specific duration one time?
To run a one-time manual cycle for all stations on your Orbit Easy-Set Logic™ timer, follow these steps: Turn the dial to AUTO. Press…
How do I reset and reprogram the timer after a long power outage?
If your timer is unresponsive or difficult to program after a power outage, you should first perform a full reset to clear any corrupted…
How do I set the clock and program the Noma 52-8835-2 timer to turn on for a specific number of hours?
To set up your Noma Digital Timer (Model 52-8835-2) so lights come on and stay on for a specific duration, follow these steps: 1.…
Where can I find the instruction manual for Clocky?
If your Clocky did not come with a physical manual, you can follow these quickstart steps to get it set up: Install Batteries: Unscrew…
Where can I find a clean version of the myTouchSmart Plug-in Timer user manual without ads?
You can view the clean, ad-free instructions directly on this page. Below is a summary of the essential setup and programming steps for your…
Can I replace a faulty LCD display on my Orbit Sprinkler Timer if the pixels are missing?
Based on the Orbit Sprinkler Timer manual, there are no instructions for replacing the internal LCD screen or "reader" component. The device is generally…
Where can I find the manual for the Orbit 24620-1 water timer, which has a button instead of a dial?
The manual on this page is for the Orbit 1-Outlet Hose Faucet Timer (often model 62061N or 56619), which utilizes a rotary dial for…