Why does the SONOFF MINI Dry only work on Wi-Fi and not via 4G mobile data?
The SONOFF MINI Dry is designed to be controlled remotely via the eWeLink App using any internet connection, including 4G/5G. If it only works…
Manuals+ Q&A
Switch questions & answers
Browse answered questions about Switch, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsCan the Kasa HS200 or HS220 be used with a 50Hz power supply in the Kanto region, and will it cause flickering or overheating?
Based on the technical specifications provided for the Kasa Smart HS200, the device is rated for an input voltage of 100 - 120 VAC,…
How do I connect the BroadLink S3 Hub to the app when it gets stuck on the AP device request?
It appears your setup is stalling during the AP Mode (Access Point) configuration phase. This usually happens when the app needs you to manually…
How do I type the at symbol (@) on the DIERYA DK61SE keyboard?
To type the "at" symbol (@) on the DIERYA DK61SE, the method depends on your operating system's language settings rather than a specific FN…
Where can I find the configuration manual for the XikeStor SKS8300-8X?
The XikeStor SKS8300-8X is a Layer 3 managed switch. While the basic hardware instructions are available on this page, detailed software configuration for features…
How do the indicator lights behave during charging and how long does a full charge take?
Based on the NEXT NX-SWLCA Mini Wireless Pro Controller manual, here are the details regarding charging and indicator lights: Charging Time: A full charge…
How do I set up the Ankor Health Mini Scale for first use and how do I turn it on?
To set up your Ankor Health Mini Scale for the first time, follow these steps: Powering On: The scale does not have a physical…
Can the Ubiquiti Pro Max 16 PoE Switch be mounted to a wall?
Yes, the Ubiquiti Pro Max 16 PoE Switch is designed to be wall-mounted. According to the installation guide, the package includes the necessary hardware…
How can I connect the BSP-D3 controller to a Nintendo Switch Lite as Player 2 without disconnecting the console's built-in controls?
To connect your BSP-D3 controller to your Nintendo Switch Lite as a secondary controller, please follow these steps based on the manual: On your…
How can I extend the light duration on the 2201H Relay Remote Control Switch?
The DIESE ELECTRONIC 2201H relay switch does not have a built-in timer function to set a specific duration (like 30 seconds or 5 minutes).…
Do you sell repair parts for the VSR-CF waterflow switch?
Manuals+ provides product manuals and technical documentation but does not sell replacement parts or repair kits directly. To purchase repair parts for the Potter…
How do I perform the step-by-step calibration process for the LoraTap SC500W curtain switch using the Smart Life app?
To calibrate your LoraTap SC500W-V2 curtain switch in the Smart Life app, follow these steps: Open the Smart Life app and select your curtain…
How to wire a Legrand LVSW-102-W 2-button switch to an occupancy sensor?
The Legrand LVSW-102 is a low voltage switch designed to work with lighting control devices (such as power packs or room controllers) that interface…
How do I factory reset my Aubess smart switch and resolve connectivity issues when the light is blinking slowly?
To reset your Aubess smart switch to factory settings and resolve connectivity issues, you can use one of the following methods: Button Method: Long…
How can I get a quote for the zencontrol ZC-SS Smart Switch?
Manuals+ is a repository for product manuals and does not provide direct sales or quotes. To obtain a quote for the zencontrol ZC-SS Smart…
Where is the PAIR button located on the sender unit for the Smartwares SH4-99572?
Based on the instruction manual for the Smartwares SH4-99572, the 'sender' refers to the wireless wall switch unit. While the manual text mentions a…
Why does a 'live streaming time limit reached' error appear every 10 minutes?
The error message 'live streaming time limit reached' is not a function or error generated by the D-Link DGS-F1010P-E switch itself. This switch is…
How do I put the TMYKQ004 Zigbee Scene Switch into pairing mode?
To put the Shen Zhen Simaru Tec TMYKQ004 Zigbee Scene Switch into pairing mode (network pairing), please follow these steps based on the manual:…
Why is my Tongou DIN Rail Smart Switch flashing red and how do I fix the lost connection?
Based on the Tongou DIN Rail Smart Switch manual, here is how to interpret the LED indicators and resolve connection issues: Red Light Meaning:…
What parts are needed for the NikolaTesla Switch downdraft to vent at the toe kick?
The Elica NikolaTesla Switch (ENS436BL) supports two installation types: Ducted Out or Recirculating. To vent at the toe kick, you must use the Recirculating…
Is the PCsensor FS2020 foot pedal MIDI compatible for use with Hauptwerk software?
Based on the user manual for the PCsensor FS2020, the device is primarily designed as a keyboard emulator. It allows you to assign pedals…
Why is my BN-LINK SU101D timer switch not turning off the lights at the programmed time (5:30 AM) even though it works manually?
If your BN-LINK SU101D timer is not turning off at the scheduled time, please check the following common causes: Operating Mode: Ensure the timer…
How can I contact Aubess customer service?
To contact customer service for your Aubess 16A Smart WiFi Switch, you have a few options depending on where you purchased the device and…
How do I change the output mode from toggle to momentary (impulsive)?
Based on the manual for the DieseRC 2402W, the device supports RF remote control pairing, but the physical manual provided does not explicitly detail…