What should I do if the transfer switch does not change lines?
If your EARU ELECTRIC ATS is not switching between lines, please check the following troubleshooting steps: Check the Mode Switch: Ensure the manual/automatic toggle…
Manuals+ Q&A
Switch questions & answers
Browse answered questions about Switch, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsWhy is the transfer switch not changing lines?
If your EARU ELECTRIC ATS is not switching between lines, please check the following common causes based on the product specifications: Voltage Levels: The…
The Dio Connect switch is not detected by the Dio One application.
The provided manual for the DiO 54717 Wireless Switch does not mention integration with a "DiO One application." The manual focuses on linking the…
What is the expected RSSI range for the JascoPro Series Plug-In Smart Switch when it is close to the hub?
The official manual for the JascoPro Series Plug-In Smart Switch (ZWN4109/79244) does not specify exact RSSI (Received Signal Strength Indicator) values, as these can…
How do I set up and troubleshoot the D-Link DGS-1005A Gigabit Desktop Switch?
To set up and troubleshoot your D-Link DGS-1005A Gigabit Desktop Switch, follow these steps from the user guide: Product Setup Step 1: Power Connection…
How do I change the keyboard color?
The provided manual for the DIERYA DK61SE keyboard does not explicitly mention how to change the color of the keyboard's lighting. It only provides…
How do I wire two Legrand LVSW-102 switches to a power pack to control lighting from two different locations?
To control a lighting load from two different locations using two Legrand LVSW-102 switches and a power pack (like the Wattstopper BZ-150), you must…
How do I connect two LVSW-102 switches to a BZ-150 power pack for separate entry control?
To connect two LVSW-102 switches to a Wattstopper BZ-150 power pack for multi-way control (functioning from two different entries), follow these steps: Common Connection:…
Which app works with the Smartwares SH4-90268 wireless power switch?
The Smartwares SH4-90268 is part of the "Plug & Connect" series, which primarily uses 433.92MHz radio frequency for direct pairing with remote controls and…
How do I manually change the time on my Wildgame Switch camera?
To manually change the time on your Wildgame Switch camera, follow these steps while the camera is switched on: Activate the LCD: Press the…
Where can I download the Somfy TaHoma app and how do I set up my devices?
To control your Somfy TaHoma switch and manage your awnings, door locks, and cameras, you need to download the TaHoma by Somfy app (sometimes…
Where can I find the Italian version of the Somfy TaHoma switch manual?
It appears the primary manual currently displayed is the French version (Notice d’installation FR). While the physical manual often includes multiple languages, the digital…
Does the automatic schedule still work if the device loses Wi-Fi connection?
Yes, the automatic on/off schedules (timers) typically continue to function even if the device loses its Wi-Fi connection, provided that the device remains powered…
How do I pair the FCT 10-1 BiSecur radio code switch with the Supramatic E4?
The provided manual for the HORMANN FCT 10-1 BiSecur Radio Code Switch (TR20A266-A RE/02.2020) does not contain specific instructions for pairing with a Supramatic…
Why is my Sonoff DIY BASIC disconnected in eWeLink, why is the firmware update from 1.4.1 to 1.5.1 failing, and is a subscription required to use the app?
Based on the SONOFF DIY BASIC manual and standard eWeLink functionality, here is guidance for your issues: Subscription Requirement: No, a paid subscription is…
Why won't my ECOELER 3 Way Motion Sensor Light Switch turn on the lights even after following the manual and trying the manual override?
If your ECOELER 3 Way Motion Sensor Light Switch is not turning on the lights even after a breaker reset and manual override attempt,…
Why is the D-pad on the left side of the STR-M-01 racing wheel non-functional or missing a circuit board?
According to the official specifications for the Gembird STR-M-01, the device is designed to include a 4-way D-pad and 8 action buttons. The manual…
Can I adjust the maximum pressure of the Brio 2000 to be lower than 6 bar?
No, you cannot adjust the maximum pressure on the Italtecnica Brio 2000. According to the instruction manual (Section 14), the maximum pressure is not…
Why is my EWelink 2CH Smart Switch found by the app but failing to pair after I deleted it to reinstall?
If your EWelink 2CH Smart Switch is discovered but fails to pair, please follow these troubleshooting steps based on the user guide: Reset the…
Where can I find the German instructions for the SMART SWITCH module BM-101?
The manual currently available on this page is for the MoesGo MS-104 Wi-Fi+RF Switch Module. While the BM-101 is a similar smart switch module…
Is the wiring diagram for the SF-2P-4P-063 correct regarding the contact numbering and polarity?
The wiring diagram provided in the manual for the Schelinger SF-2P/4P-063 modular changeover switch uses standard numbering for electrical contacts rather than fixed polarity…
Is it possible to create a single pulse for a gate opener with the SONOFF MINI-D?
Yes, it is possible to create a single pulse for a gate opener using the SONOFF MINI-D. This device is specifically designed with a…
Does the Shelly Pro 4PM change its contact state if it loses internet connection, and can it be configured to switch status upon losing connection?
By default, the Shelly Pro 4PM will maintain its current state (the last state it was in) if it loses internet connectivity. It does…
How do I remove the glass plate from the CNBINGO DS-101JL Smart Touch Light Switch?
To remove the glass plate from your CNBINGO DS-101JL Smart Touch Light Switch, follow these steps: Safety First: Turn off the power at the…