Soundcore questions & answers

Based on the Soundcore AeroClip (A3388) manual, there is no built-in "translation application" specifically mentioned for these earbuds. However, you can use the Soundcore…

By default, the Soundcore Space A40 earbuds do not have volume control assigned to their touchpads in the standard factory settings. To control the…

Based on the user manual for the SoundCore Motion Boom (A3118), this speaker is primarily designed for Bluetooth connectivity and does not feature an…

Based on the user guide for the soundcore Liberty 5, there is no mention of a feature to set a password or PIN directly…

The provided manual for the Soundcore A30 Special Sleep Earbuds describes features such as noise cancellation and long battery life, but it does not…

To update the firmware for your soundcore Liberty 5 earbuds, follow these steps using the soundcore app: Download the App: Ensure you have the…

To adjust the audio balance and make voices stand out more clearly on your Soundcore Rave 3S, you should use the soundcore App. The…

To adjust the audio balance for clearer voices on your soundcore Rave 3S, you have two primary options: 1. Use the soundcore App EQ…

The provided manual text does not explicitly list the default button combination for answering phone calls. However, you can manage and customize your call…

This issue often occurs on Windows laptops when the device is set to 'Hands-Free AG Audio' mode instead of 'Stereo' mode. Please try the…

The soundcore Space One (A3035) features several physical buttons to control audio, calls, and noise cancellation. Below is a breakdown of their functions: Power…

Based on the soundcore V40i manual, the earbuds do not have a physical "power button"; instead, they use a Touch-Control Area located at the…

If your soundcore P30i earbuds remain on and connected to your phone while inside the case, it usually indicates a connection issue between the…

To operate the noise cancellation (ANC) features on your Soundcore Sport X20 earbuds, you can use the physical controls or the mobile application: Physical…

If you need service or technical support for your Soundcore Select 4 Go, you can follow these steps: Official Support: Visit the official Soundcore…

If your soundcore Liberty 4 Pro earbuds are disconnecting automatically, please check the following settings and troubleshooting steps based on the user guide: Auto…

The provided user manual for the Soundcore Space One Pro (A3062H21) does not contain instructions for replacing the headband. The manual only provides guidance…

If your Soundcore Rave Partycast Portable Bluetooth Speaker is not showing any lights after being plugged into a wall outlet, it could be due…

Based on the Soundcore K20i Quick Start Guide, the default touch controls do not include volume adjustment. To increase or decrease the volume, you…

To manage the touch feedback sounds on your Soundcore P40i (A3955) earbuds, you must use the Soundcore app. While the manual does not explicitly…

If your soundcore A30i charging case is not closing fully and the green LED is not flashing when plugged in, please follow these troubleshooting…

Inconsistency when using two soundcore Motion+ speakers in stereo (TWS) mode can often be resolved by ensuring the correct pairing sequence and checking for…

To connect your Soundcore Life A1 earbuds to your iMac, follow these steps: Enter Pairing Mode: Take the earbuds out of the charging case.…

To connect your Soundcore Life A1 earbuds to your iMac, follow these steps to ensure they are in pairing mode: Enter Pairing Mode: Take…