SoundCore Motion Boom Portable Speaker A3118
USER MANUAL
At a Glance
1. Bass button
2. Bluetooth button
3. Volume down button
4. Multi-function button
5. Volume up button
6. Power button
7. TWS button
8. USB-A port for charging out
9. USB-C port for charging in
Charging
Charge your Speaker
- Use a certified USB-C cable and charger to prevent any damage.
- Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
- Disconnect this speaker from the charger when fully charged. Do not charge for extended periods.
Charge your USB Devices
Charge your USB devices through the USB-A charging port.
Powering On/Off
This speaker will power off automatically after 30 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
- Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. f not, press the Bluetooth button to enter Bluetooth pairing mode.
TWS (True Wireless Stereo) Mode
Two identical Soundcore speakers can pair up with each other for true wireless stereo sound. n TWS mode, connect either one of the two speakers with your mobile device so that both speakers play the same audio (one as L channel and the other as R channel).
On both Soundcore speakers, press the TWS button to enter TWS pairing mode.
- The speakers start searching for each other to establish the TWS connection. The TWS LED indicator on both speakers will flash white.
- Once successfully connected, the TWS LED indicator on both speakers will become steady white.
To exit the TWS mode, press and hold the TWS button for 2 seconds.
Soundcore App
Download the Soundcore app to enhance your experience.
Product information: Check the product name and software version, or read the user manual.
Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.
Battery status: ndicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
EQ settings: There are 4 EO settings you can choose from in the app to optimize your experience while enjoying different music genres.
-
Soundcore Signature: Normal EO mode with well-balanced sound.
-
Voice: Voices stand out more clearly from other ambient sounds.
-
Treble Boost: High frequencies are enhanced.
-
Balance: No enhancement for high-frequency and low-frequency sounds.
Set Auto-power off time: Set an auto-power off time (5/10/30/60 minutes, 30 minutes by default), the speaker will automatically power off when time is up.
Voice prompt: Mute or restore the voice prompt while powering on/off.
Specifications
Specifications are subject to change without notice.
| DC power input | 5 V 2.1 A |
| Battery capacity | 10000 mAh |
| USB output | 5 V 1 A |
| Audio output power | 30 W |
| Charging time | 4 hours |
| Playtime | Up to 24 hours |
| (varies by volume level and music content) | |
| Waterproof level | IPX7 |
| Bluetooth version | 5 |
| Bluetooth range | 20 m / 66 ft |
DOWNLOAD
SoundCore Motion Boom Portable Speaker A3118 User Manual – [Download PDF]
SoundCore Motion Boom Portable Speaker A3118 QSG – [Download PDF]
A3118 Soundcore Motion Boom Declaration of Conformity – [Download PDF]
