Why do I only have 8 setting programs on my G51-LCD display instead of the full list?
The Sciwil G51-LCD display typically features up to 16 or 17 setting parameters (P01 through P16/P17). If you are only seeing 8 programs, it…
Manuals+ Q&A
Display questions & answers
Browse answered questions about Display, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsWhere can I take my e-bike to increase the speed limit and remove the physical pedal assist requirement?
To modify the speed limits or assist behavior on your e-bike using the Yolin YL81C-B display, you should first consult the local e-bike shop…
What does 'Transfer failed: Code 12' mean on the Holoscope app and how can I fix it?
While the Holoscope D42 manual does not explicitly define "Code 12," this error typically occurs during the file transfer process when the connection between…
How do I reset the settings to factory defaults?
The Sciwil EN06-LCD user guide does not provide a single "factory reset" button or command to restore all settings at once. Instead, you must…
I forgot my code and cannot access the display. How do I get in?
The manual states that if a boot password is activated, you need to enter it at the start when turning on the display. Unfortunately,…
How do I unlock my Sciwil SW-M808X display?
While your request mentions the SW-M808X, the provided manual is for the Sciwil M58. Many Sciwil displays share similar operation logic, but please note…
How do I reset the APT Middle Type Intelligent LCD Display to factory settings?
The APT Middle Type Intelligent LCD Display (Model APT12LCD800S-UART-5S) does not have a dedicated physical reset button. However, you can perform a Data Cleanup…
How do I use gestures to step through forecasts on the LightMap Tempest Weather Display, and is there an AM/PM indicator?
Based on the LightMap Weather Display manual, here is the information regarding your requests: Gesture Controls: The manual confirms that the Status Indicator Bar…
How do I reset or adjust the factory settings on the SCIWIL EN06-LCD display for a 14-inch Samebike?
To adjust the settings on your SCIWIL EN06-LCD display, follow these steps: Enter Settings Interface: Press and hold the Plus and Minus keys simultaneously.…
What are the mounting hole specifications and screw sizes for the Clear Touch CTI-6075A?
For the Clear Touch CTI-6075A 75" Interactive Display, the standard mounting specifications are as follows: VESA Pattern: 800 x 400 mm Screw Size: M8…
What is the purpose of the USB port on the Sciwil EN06-LCD display?
While the provided user guide for the Sciwil EN06-LCD does not explicitly mention or label a USB port in its standard connection diagrams (Section…
What is the purpose of the USB port on the Sciwil EN06-LCD display?
The provided manual for the Sciwil EN06-LCD does not explicitly list a USB port in its technical specifications or function list. However, on many…
What does Error 22 mean on the Sciwil EN06-LCD display?
Based on the Sciwil EN06-LCD User Guide, the standard error code list (Section 5.7) only defines codes from 0 to 13. However, in many…
What type of IC box or controller is compatible with this display?
The VeloFox DM03 Intelligent OLED Display is designed to be compatible with controllers that use either UART or CAN BUS communication protocols. According to…
How do I change the system voltage setting on the Sciwil SW-M61 display to match my 54V battery?
To adjust the system voltage on your Sciwil SW-M61 display so it accurately reflects your battery level, follow these steps: Enter Settings: While the…
How can I purchase the Sciwil SW-K618 E-Bike Display?
Manuals.plus is a repository for product manuals and does not sell products directly. To purchase the Sciwil SW-K618 E-Bike Display, you should contact the…
How do I reset the trip mileage on the HUIYE B02U-N display?
Based on the HUIYE B02U-N manual, resetting trip data (Single Mileage) is performed through the Parameters Setup menu. While the specific button sequence for…
My rearview camera is broken. Can I order a new one? If so, how, where, and what does it cost?
The provided manual for the BlackboxMyCar D1026-S does not contain specific information regarding replacement parts, pricing, or a direct store link. However, based on…
How do I adjust the brightness on the AMHVMU M22 HUD?
To adjust the brightness on your AMHVMU M22 HUD, you must enter the setting mode and navigate to Menu 3. Follow these steps: Enter…
How do I change the wheel circumference setting on the MAHLE PulsarONE display?
Based on the MAHLE PulsarONE High-Contrast Wireless Display User Manual, the device features a MENU system for configuration. To access the settings where parameters…
How do I turn on Bluetooth?
The BAFANG DP C241 display features a dual Bluetooth communication function that is typically active by default when the display is powered on. According…
How can I fix an E10 error code on the Sciwil EN06 display, especially after it occurred while using the USB port?
According to the Sciwil EN06 manual, the E10 error code indicates a Communications Error. This means the display is unable to communicate properly with…
What are the functions of the white and brown wires?
Based on the provided manual for the SCIWIL S886-LCD, the specific functions of individual wire colors (such as white and brown) are not explicitly…
What is the DC voltage for the headlight?
The provided manual for the Sheng milo NOKEE-U King Meter LCD Display does not explicitly state the specific DC voltage output for the headlight.…