Yolin YL81C-B E-bike Display User Manual

Product name and model
Intelligent LCD for e-bike; model: YL81C.

Specifications

• 36V/48V power supply
• Rated working current 15mA
• Maximum working current 30mA
• Leakage current at power-off <1uA
• Working current at the supply controller end 50mA Working temperature -20～60
• Storage temperature -30～70

Appearance and dimensions

Function overview and functional area layout

Function Overview

Display YL81C provides a variety of functions to meet the rising needs of users, including:

• Battery level indicator
• Assist level adjustment and indication
• Headlight indicator
• Speed indicator (including real-time speed, maximum speed (MAXS) and average speed (AVG))
• Distance indicator (including ODO and trip distance (Trip))
• Error code indicator
• Bluetooth connection indicator (reserved)
• Parameter setting function

Functional area layout

Button definitions
There are three buttons on the operating unit of display YLSIC, i., the on/off button the plus button and the minus button.

General operation

Power on/off
By pressing and holding the button, the display will start to work and the working power supply of the controller will be turned on. In the power-on state, by pressing and holding the button, your e-bike will be powered off. In the power-off state, the display will no longer use the battery power, and its leakage current will be less than luA. If your e-bike is not used for more than 10 minutes, the display will be automatically powered off.

Display interface
After the display is turned on, the display will show the real-time speed (km/h) and the trip distance (km) by default. By pressing the button, the information displayed will be switched between the trip distance (km), ODO (km), maximum speed (km/h) and average speed (km/h). When the distance reaches 9999.9 km. it will be automatically reset to zero.

Push assistance
By pressing and holding the button, the electric push assistance mode will be enabled. Your e-bike will run at a constant speed of 6km/h. The display will show level P. By releasing the button power output and return to the state before push assistance. , your e-bike will immediately stop power output and return to the state before push assistance.

Headlight on/off
By pressing and holding the button the controller will turn on the headlights and the display backlight will turn dark. By pressing and holding the button again, the controller will turn off the headlights and the display backlight will resume the luminance.

Assist level selection
By pressing the button/ the e-bike assist level will be switched to change the motor output power. The Assist levels available for the display include: levels 0-3, levels 1-3, levels 0-5, levels 1-5, levels 0-7, levels 1-7, levels 0-9 and levels 1-9.

Battery level indicator
The battery level indicator consists of five segments. When the battery is fully charged, the five segments will be all on. In case of Undervoltage, the outline of the battery indicator will flash, which means the battery has to be charged immediately.

Error code indicator
When a fault occurs in the electronic control system of your e-bike, the display will automatically indicate the error code in the distance area in the format of E0. Detailed definitions of error codes are shown in Schedule 1.

When an error code appears on the display interface, please conduct troubleshooting in time. Otherwise, your e-bike will not work normally.

General setting
All parameters can only be set when your e-bike stops. The steps for the general setting are as follows: In the power-on state when the display shows a speed of 0,

Trip distance reset
Press and hold the buttons at the same time for more than 2 seconds to reset the trip distance.

Factory reset
dEF refers to factory reset. dEF-n represents not to restore factory settings, and dEF-y represents to restore factory settings. Press and hold the buttons U and # at the same time for more than 2 seconds to enter the factory reset interface, and press the /button A to select a parameter.

Custom setting
All parameters can only be set when your e-bike stops.

The steps for custom setting are as follows:

1. In the power-on state, when the display shows a speed of 0, Press and hold the buttons at the same time for more than 2 seconds to enter the selection interface of custom setting options;
2. Press the button to switch the selection interface of general setting options, and press the button to enter the parameter modification interface;
3. Press the button / – for parameter selection;
4. Press the button to save the parameter and return to the selection interface of custom setting options;
5. Press and hold the button to save the parameter and exit the selection interface of custom setting options.

Rated voltage setting
Pl refers to the rated voltage setting option. Available values include 36V and 48V. Press the button to enter the parameter modification interface. Press the button/ for parameter selection. Press the button to save the parameter and return to the selection interface of general setting options.

Wheel diameter setting
P2 refers to the wheel diameter setting option. Available parameters include 8-32 inches. Press the button on the parameter modification interface. Press the button / for parameter selection. Press the button parameter and return to the selection interface of general setting options. to enter to save the parameter and return to the selection interface of general setting options.

Speed limit setting
P3 represents the speed limit setting option. The adjustable range is 10~40km/h. Press the button parameter modification interface. Press the button / for parameter selection. Press the button parameter and return to the selection interface of general setting options. to enter the to save the parameter and return to the selection interface of general setting options.

Metric/imperial system setting
P4 refers to the metric/imperial system setting option. 00 represents the metric system, and 01 represents the imperial system. Press the button to enter the parameter modification interface. Press the button / for parameter selection. Press the button to save the parameter and return to the selection interface of general setting options.

Speed sensor setting
P5 refers to the speed sensor setting option, which can be set according to the number of magnetic heads installed on the wheels of your e-bike. The setting range is 1-63. Press the button to enter the parameter modification interface. Press the button / for parameter selection. Press the button to save the parameter and return to the selection interface of general setting options.

Current limit setting
P6 refers to the current limit setting. The adjustable range is 1-25A. Press the button to enter the parameter modification interface. Press the button / for parameter selection. Press the button to save the parameter and return to the selection interface of general setting options.

Assistance sensor setting
P7 refers to the assistance sensor setting option, where the number of steel magnets of the assistance magnetic disk can be set. The adjustable range is 5, 6, 7, 8, 9, 10 and 12. Press the button to enter the parameter modification interface. Press the button / for parameter selection. Press the button to save the parameter and return to the selection interface of general setting options.

Power-on password setting
P8 refers to the power-on password setting option. PSd-Y means that a power-on password is required, and PSd-N means that no power-on passwords are required. The default value of the display is PSd-N. Press the button to enter the verification interface, and press the button / to enter the selection interface. If PSd-N is selected, press the button to return to the selection interface of custom setting options; If PSd-Y is selected, press the button to enter the password setting interface. If you don’t want to change the password, press and hold the button to exit the custom setting interface. If you want to change the password, press the button for cursor movement and the button / for figure selection, and then press the button to retrieve the selection interface of custom setting options.

Quality commitments and warranty scope

Warranty information
For the faults caused by the quality of the product under normal use, the Company will be responsible for providing a limited warranty during the warranty period. The warranty period of the product is within 12 months from delivery. 8.2

• Non-warranty scope
• The enclosure is opened
• The connector is damaged
• The enclosure is scratched or damaged after delivery
• The outgoing line of the display is scratched or broken
• Faults or damage caused by force majeure (such as fires, earthquakes, etc.) or natural disasters (such as lightning strikes, etc.)
• The warranty period has expired

Outgoing line connection diagram

Wiring sequence of standard connector

Table 9-1 Wiring Sequence of Standard Connector

The outgoing lines of some products adopt waterproof connectors, and users cannot see the outgoing line colour inside the wire harnesses.

Considerations
Please use it safely, and do not plug or unplug the display when it is powered on. Please avoid bumping as far as possible. Please do not alter the background parameter settings of the display at will, otherwise, normal riding cannot be guaranteed. If the display fails to work normally, it should be repaired as soon as possible. Due to product upgrades of the Company, part of the displayed contents or functions of the product you bought may be different from the manual, depending on the actual model.

Schedule 1 Error Code Definitions

Tel: 022-86838795 Fax: 022-86838795
Email: yolin@yolintech.com
Website: www.yolintech.com
Address: Plant 52-1, Yougu Xinke Park, East of Jingfu Road, Pharmaceuticals and Medical Equipment Industrial Park, BeichenEconomic Development Zone, Beichen District, Tianjin

Download PDF: Yolin YL81C-B E-bike Display User Manual

References

• User Manual