LED Bluetooth Symphony
Controller
Technical Parameters
| Productname | Bluetooth Symphony Controller |
| Support system | Android 4.4 and above / iOS 11.0 and above |
| Connection mode | Bluetooth 4.0 |
| Remote control | 40-key |
Product Description
S Short press: under static color, It is brightness adjustment. There are 10 levels of brightness Short press: under dynamic color, It is speed regulation. There are 10 levels of speed
Short press: on / offM Short press: a switch of 7 static colors 5 dynamic color switching Switching of 5 music modes Sequential cycle
The plastic sheet isolates the battery. remove the plastic sheet when using the remote control
Download App Software
Please search LED LAMP in major Appcenters, or scan below QR code.
http://url.szszjkj.com/79810915950
- Download the “LED LAMP” APP with your mobile phone by scanning the QR code on the user manual or searching the “LED LAMP” APP in the iPhone APP store or Google play store.
- After the APP is downloaded successfully, you need to turn on the Bluetooth function on your phone firstly, then plug in the strip light, then open the APP, your APP will pair with the strip light automatically and you can control it.
*Android phones need to open the location function and allow permission
Instructions
On the homepage interface, pull down to refresh, the APP will automatically search for nearby devices. After finding the device, click the device icon to enter the light control interface. You can also click the “+” button in the upper right corner, select the device and enter the light control interface. (Select LED DMX 00-XXXX device)
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
Documents / Resources
 | Shenzhenxingpuyuantechnologycompany XPY-8766 LED Bluetooth Symphony Controller [pdf] Instructions XPY-8766, XPY8766, 2A5AA-XPY-8766, 2A5AAXPY8766, XPY-8766 LED Bluetooth Symphony Controller, LED Bluetooth Symphony Controller, Symphony Controller, Controller |
