How do I set up the iWFCam W8 / W9 camera, and what should I do if I am having trouble?
If you are finding the iWFCam W8 or W9 difficult to use, please ensure you have followed these critical setup steps before deciding to…
Manuals+ Q&A
Camera questions & answers
Browse answered questions about Camera, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsHow can I watch the live stream 24 hours a day without the camera going idle or stopping?
To ensure your camera records and remains active for 24-hour monitoring, you must adjust the recording settings within the YCC365 Plus app. By default,…
How do I change the Wi-Fi network for my Tapo camera?
To switch your Tapo camera to a different Wi-Fi network, you generally need to reset the device and set it up again through the…
Why is the YCC365 Plus app failing to open on Android 11 and 12, showing a '5.0 Simple and extreme' error?
The error message you are seeing, "5.0 Simple and extreme," typically indicates a server-side configuration issue or a domain propagation error (as seen on…
How long is the voice recording duration when motion is detected, and does the camera record when it is not plugged into an outlet?
Based on the Tapo Camera documentation and app features, here are the answers to your questions: Recording Duration: When motion is detected, the camera…
How do I display the QR code on my phone to reconnect my CAY camera to WiFi using the P6SLite app?
To reconnect your camera to your home WiFi using the P6SLite app, follow these steps to access the setup modes: Open the P6SLite App:…
How much data per month is required to run two eufyCam 2C cameras on a limited data plan?
The eufyCam 2C system primarily uses local storage on the HomeBase 2, which helps minimize data usage compared to cloud-based cameras. However, data is…
How do I activate the motion detection function on the Yoosee 4G Solar Security Camera?
To activate motion detection on your Yoosee 4G Solar Security Camera, please follow these steps within the Yoosee app: Open the Yoosee App and…
Why does my YCC365 Plus camera always show as disconnected even after reinstalling the app?
If your YCC365 Plus camera consistently shows as "disconnected," follow these troubleshooting steps from the manual: Check Power and Wi-Fi: Ensure the camera's power…
What are the specifications of the rechargeable lithium battery for the Kmart Terrain Scout RC car?
The Kmart Terrain Scout with Camera uses a rechargeable lithium-ion battery pack. While the manual confirms it is a lithium-ion battery, it does not…
How do I fix registry error 11602 and recover my password for the YCC365 Plus camera?
Error 11602 in the YCC365 Plus app typically indicates a network communication failure or a server-side registration issue. To resolve this and regain access…
How do I remove the 'Camera shield' (Schermatura telecamera) message from the screen?
The "Camera shield" (or Schermatura telecamera in Italian) message appears when the camera's privacy mode is active, which often causes the lens to rotate…
How do I install the memory card in the Cinnado B6 camera?
To install a memory card in your Cinnado B6 IP Camera, follow these steps based on the product diagram: Locate the Slot: The TF…
How do I activate continuous recording on the SD card for the JOOAN S3-U Smart Camera?
To activate continuous recording on your JOOAN S3-U Smart Camera, please follow these steps within the CAM720 app: Open the CAM720 app and select…
How do I change the default startup mode from video to photo?
Based on the AKASO Keychain Camera manual, the camera is designed with Normal Video as its default setting. However, you can change the active…
Where is the SD card slot located on the ICLOUD C-P05 camera, what is the maximum supported size, and what is the difference between a TF card and an SD card?
Based on the YCC365 Plus camera documentation and common hardware designs for this model, here are the answers to your questions: Location: The SD…
What are the SD card requirements for the ICLOUD C-P05 camera, and what is the function of the third button on the cable?
Based on the YCC365 Plus camera documentation and common hardware configurations for this model, here are the details regarding your ICLOUD C-P05 camera: The…
Where is the siren off button in the Tapo app and how do I disable the siren?
The siren control (Alarm) can typically be found within the Live View screen or the Camera Settings of the Tapo app. If you are…
What is the Wi-Fi connection range for the JOH501 trail camera?
The built-in Wi-Fi for the JOH501 Wi-Fi Trail Camera has a limited range. According to the user manual, the maximum distance is 45 feet…
How do I troubleshoot error code d8001 on the Boifun VB805 baby monitor?
The provided manual for the Boifun VB805 does not explicitly list an error code 'd8001'. However, most connection or system errors on this model…
How do I connect a Wyze Cam Pan?
It appears you are asking about a Wyze Cam Pan, but the manual provided here is for Geeni Smart WiFi Cameras. These products use…
How do I connect my Geeni Smart WiFi Camera to my iPhone?
To connect your Geeni Smart WiFi Camera to your iPhone, follow these steps: Download the App: Download the Geeni app from the Apple App…
How many cameras can be added to the YCC365 PLUS app?
Yes, it is possible to add more cameras. While the YCC365 Plus app does not specify a strict maximum limit for the total number…
Why does my YCC365 Plus camera require reconfiguration every time the power goes out?
It is not normal for the YCC365 Plus camera to lose its settings after a power outage; it should automatically reconnect to the saved…