CAY P6SLite User Manual
Main page
Scan QR Code To Download APP
Note: iPhone devices; iOS 8 or above Android 4.0 or more
Sign up
- Download the app P6SLite from the store.
Select Service area: China/International. The default is China Service Zone. Please choose International Service Zone if the device is out of China.- And Sign up to create a new Cloud account.
- Or click Local icon to login without Cloud account. (Ref. to 1.2)
- Or click Twitter icon to login with Twitter account. (Ref. to 1.2)
Login
- Select service area as the same as when signing up.
- Enter your credentials and select Login.
- You can also select Local or Twitter icon to Login without Cloud account
Add Device
- AP mode is mainly used for direct hot spot connection with WIFI camera.
- Scan QR codes of IP device. (label on device) to add device.
- Add the advice in the LAN, when the smart phone and the IP device are in the same LAN.
- Manually add the device. Input DID, user name and password of the device manually.
Device
Device refresh button。
Fast add device by scanning a QR of IP device.
Adding devices (Ref. to 1.3 Add device)
Push to read Alarm message.
To View download or screenshot pages。
Information of current account, version No. of the APP.
Message
Push Message icon to go to LIVE video of alarm IP device.
Image
Push Image icon to go to the list of playback movie, image (downloaded in smartphone, and snapshot of Live.
Live
- In the Preview lit of device. You can see the status of the IP device. Online or Offline.
- Drop-down to list to refresh.
- Push
to go to LIVE of IP device.
Push to trigger a siren of IP device. (Device should support siren).
Push to select IR LED mode: Normal, Color and Smart.
full screen display.
Push one time to start recording in Smartphone. Push again to stop recording.
Snapshot LIVE Image.
To control Pan/Tilt/Zoom of IP device. (Device should support PTZ)
Keep pushing to talk. (Device should support PTZ)
Image quality selection
LD: CIF 352*288
SD: D1 704*576
HD: Full HD 1920 *1080
Push to ON/OFF the audio from IP device. (Device should support audio IN
Playback
Select to playback the recording in SD card according to the date.
Push to start recording what playback in smartphone. Push again to stop recording.
snapshot a still image during playback.
Download recording file in SD card or HDD of IP device. (Device should support this function)
Playback date
- Choose the date and start time to playback.
- Click Start Play
- Yellow means the recording when motion alarm triggered.
- Blue means the recording in Schedule
Download
Push Download icon to the page of video List.
Push to download the file in SD card of IP device.
Search file in SD card according to the date.
Device options
Subscribe or Unsubscribe push notify function ,
Subscribe: As long as an alarm triggers, the user will receive an message from APP.
Unsubscribe: the user won’t receive any message from APP.
Push to go to 1.5.2.
Push to View pictures of alarm snapshots.
Setup parameters of IP device from APP.
Edit device
Push 
to save the setup of parameters.
- Password settings
To modify the password of IP device. - Video setting
To modify parameters of main stream and sub-stream of IP device. - Audio setup
To setup parameters of audio input of IP device. - Alarm setting
To setup parameters of Alarm. (Ref. to 3.1) - Email setting
Enable: send email when alarm trigger.
Disable: will not send email when alarm trigger. - FTP setting
Enable: upload snapshot/video to ftp server when alarm trigger.
Disable: will not upload snapshot/video to ftp server when alarm trigger. - Recording setting
To setup recording. - Timing capture
To setup interval time to save snapshot to SD card and FTP server. - OSD setting
To display IP device name and time on Live channel. - Wired setting
To setup IP address or DHCP of IP device. - WIFI setting
To setup WIFI SSID and password of IP device. (Device should support this function) - SD Card setting
To format SD card of IP device. (Device should support this function.) - Mirror setting
Horizontal or vertical rotate the image. - IR-Cut Setting
To setup IR CUT in Normal, Color and Smart mode.
Normal: The image is color at day and BW in the night (IR LED ON).
Color: The image will keep color at day and night.(IR LED will not power ON)
Smart: The image is color at day and BW in the night (IR LED ON).
When motion detection triggered, White LED will power ON and image is color.(the user can setup the time of White LED ON) - Time setting:
To setup time zone, DST of the IP device from APP. - System setting
To restore and reboot IP device from APP. - About device
The FW version of IP device. - PTZ speed
To setup Pan/tilt/zoom speed from leve 1~10 of the IP device. (Device should support this function.) - Alarm Sound
To setup the sound type, volume of Siren. (Device should support this function.)
Alarm Setting
- Motion detection:
Open: When there is motion object, trigger alarm.
Disable: Will not trigger alarm when there is motion object. - Sensitivity
To setup sensitivity of Motion detection. - Check to active the function when alarm is triggered.
- Detection Area
Select the area of motion detection. - Alarm time
Select the time to trigger alarm. The user can select all day or custom
Detection Area
Alarm time/Custom
Green means the motion detection zone and alarm time selected.
Record Setting
Check to setup different recording mode (timer, Alarm, motion or disable) by time and date.
The square below will show the color of recording mode.
IR-CUT Setting
Normal: The image is color at day and BW in the night (IR LED ON).
Color: The image will keep color at day and night.(IR LED will not power ON)
Smart: The image is color at day and BW in the night (IR LED ON).
When motion detection triggered, White LED will power ON and image is color.(the user can setup the time of White LED ON)
Alarm Sound
Enable/disable Siren Linkage of the IP device from APP.
Sound type: There are 3 modes at option. Siren, Dog barking and customs recording.
Duration of the horn: 5, 10, 20, 30 seconds at option
Contact Us
SHENZHEN CAY TECHNOLOGY CO., LTD.
Add: 3/F, 4 Block, Hongfa Hi Tech. Park, Tangtou Ave., Shiyan, Bao’an District, Shenzhen
Tech. support: 86-755-85293003 85291891
Email: techsupport@caycctv.com
©2018 Shenzhen CAY Technology Co., Ltd. Copyright
Documents / Resources
 | P6SLite |
References
- User Manualmanual.tools
Can I also connect a Kammera to 2 cell phones?
Kann ich eine Kammera auch mit 2 Handys verbinden?
Kann ich eine Kammera auch mit 2 Handys verbinden?
Can I connect one camera to two cell phones?
Yes, you can connect a camera to multiple cell phones. While the manual does not explicitly detail a "sharing" button, the P6SLite system supports multi-user access through the following methods:
Once added, both phones will be able to view the Live video stream and access Playback features, provided they have the correct device password.
Note: For technical support regarding specific user limits, you can contact CAY at techsupport@caycctv.com.
German Summary: Ja, Sie können die Kamera mit zwei Handys verbinden, indem Sie entweder dasselbe Cloud-Konto verwenden oder die Kamera manuell über die DID-Nummer und das Passwort auf dem zweiten Handy hinzufügen.
Read the full Q&A page
HELLO GOOD MORNING. MY CAMERA DISCONNECTED FROM MY HOUSE WIFI … I RESTARTED IT AND ASKED ME TO ENTER WIFI BUT I DON’T KNOW HOW TO DO IT, SINCE I CAN’T FIND THE WAY TO SHOW ME THE QR ON MY CELLULAR FOR THE CAMERA TO TAKE IT AND MAKE IT “DING”. COULD YOU HELP IN THAT ??
HOLA BUEN DIA. MI CAMARA SE DESCONECTO DE WIFI DE MI CASA…LA REINICIE Y ME PIDE QUE LE INGRESE WIFI PERO NO SE COMO HACERLO, YA QUE NO ENCUENTRO LA MANERA QUE ME MUESTRE EN EL CELULAR EL QR PARA QUE LA CAMARA LO TOME Y HAGA DEL “DING”. MEPODRIAN AYUDAR EN ESO??
HOLA BUEN DIA. MI CAMARA SE DESCONECTO DE WIFI DE MI CASA...LA REINICIE Y ME PIDE QUE LE INGRESE WIFI PERO NO SE COMO HACERLO, YA QUE NO ENCUENTRO LA MANERA QUE ME MUESTRE EN EL CELULAR EL QR PARA QUE LA CAMARA LO TOME Y HAGA DEL "DING". MEPODRIAN AYUDAR EN ESO??
How do I display the QR code on my phone to reconnect my CAY camera to WiFi using the P6SLite app?
To reconnect your camera to your home WiFi using the P6SLite app, follow these steps to access the setup modes:
If you cannot find the specific QR generation screen, you can also try adding the device via Manual Add by entering the DID (found on the camera label), username, and password manually once the camera is in pairing mode.
Note: Ensure your phone is connected to the 2.4GHz band of your WiFi, as many cameras do not support 5GHz.
For further technical assistance, you can contact CAY support at techsupport@caycctv.com.
HOLA GERARDO:
Para mostrar el código QR en su celular, abra la aplicación P6SLite, haga clic en el símbolo + y seleccione AP configure o QR code. Ingrese los datos de su WiFi y la aplicación debería generar el código para que la cámara lo escanee y haga el sonido "Ding". También puede intentar Manual Add ingresando el DID que está en la etiqueta de la cámara.
Read the full Q&A page