Active questions & answers

To increase the volume on your Skullcandy JibXT Active earbuds, use the inline remote controls. Press the (+) button once to increase the volume…

The time on your iTech Active 2 is set automatically once you pair the device with the iTech Wearables App on your smartphone. There…

To pair your Skullcandy Jib+ Active or JibXT Active earbuds with a new device, follow these steps: Start with the earbuds OFF: Ensure the…

Replacement bands for the iTech Active 2 are sold separately. According to the manual, you can find additional straps in various colors and materials…

For the Skullcandy Jib+ Active / JibXT Active earbuds, a flashing light on the inline controller typically indicates the current status of the device.…

If your iTech Active 2 has been exposed to water and is no longer powering on, please follow these troubleshooting steps: Dry the device:…

To connect your iTech Active 2 to your cell phone, follow these steps: Download the App: Find and install the iTech Wearables app from…

The time on your iTech Active 2 cannot be set manually on the device itself. Instead, the time is automatically synchronized with your smartphone…

The time on your iTech Active 2 cannot be set manually on the watch itself. Instead, the device automatically synchronizes its time and date…

To troubleshoot your iTech Active 2 not charging, please follow these steps based on the manual: Check the Connection: Ensure you are using the…

It is concerning that your screen remains blank while charging. According to the manual, a charging screen should appear immediately when the device is…

The time on your iTech Active 2 is set automatically once you pair the device with the iTech Wearables App on your smartphone. The…

A constantly lit white LED on a single earbud often indicates a pairing error, a software hang, or a connection synchronization issue. To resolve…

The iTech Active 2 uses a one-touch button for all navigation. If the button is not responding, please try the following troubleshooting steps: Check…

To change the eartips on your Visual Land SOUNDWAVE A1 earbuds, follow these steps: Remove the current tip: Firmly grasp the earbud in one…

The confusion likely stems from the FAQ section of the guide which mentions a "3" in the center. On the SoundBot SB221, the power…

The Visual Land SOUNDWAVE A1 earbuds originally come with three sizes of silicone earbud tips in the box. If you need replacements, the manufacturer…

To charge your iTech Active 2 smartwatch, follow these steps: 1. Plug the charging cable into the USB port on your computer or a…

If you are having trouble pairing your Soundcore Life Q20+ headphones with your Bluetooth device, there are a few things you can check: 1.…

To change the temperature on the Hive HAH2INSTAMZ-01 Active Heating Thermostat, follow these steps: 1. Turn the dial clockwise to increase the target temperature.…

To pair the TOZO NC9 Active Noise Cancelling Wireless Earbuds, follow these steps: 1. Take out both earbuds from the charging case. They will…

To pair the TOZO HT2 Active Noise Cancelling Headphones with your device, follow these steps: 1. Make sure your device's Bluetooth is enabled. 2.…

It appears that registering Perytong headphones for warranty is problematic, the manufacturer site does not work as of May 2025. Many users report that…

To switch between different units of measurement on the Active Era BS-01 Digital Body Weight Scale, follow these steps: 1. Locate the button on…