UGREEN NASync DXP4800 Plus Network Attached Storage

About the DXP4800 Plus

The UGREEN DXP4800 Plus is a network-attached storage device designed for home and personal users. The DXP4800 Plus functions as an intelligent data management center where users can store and access data via smartphones, laptops, tablets, and TVs from anywhere with network access.

Instructions Before Use

• To ensure efficient data transmission, it is recommended to use a router or switch with 10-Gigabit LAN ports or higher and connect the NAS using the included Ethernet cable (CAT7 or higher).
• It is recommended to use new hard drives. When installing any drive(s), the NAS system will format the drive, erasing all existing data. Ensure any important data is backed up prior to installation.
• Please use only the original power adapter, or a safety-certified power adapter, that meets the power specifications for this device.
• Do not insert or remove hard drives when the NAS device is on. If necessary, please turn off the device first using the app to prevent potential file loss, data corruption, or drive damage.
• Only update firmware with a stable power supply. Do not disconnect the power supply during the update process.
• After unbinding the device, all data will be removed and cannot be retrieved. Ensure data is backed up appropriately before unbinding the device.

Package Contents

The package includes:

• 1x Network Attached Storage
• 1x User Manual
• 1x Warranty Card
• 2x Hard Drive Tray Key
• 1x Power Adapter (DC 19V/7.9A)
• 2x Ethernet Cable (CAT7)
• 2x SSD Silicone Pad (For Thermal Conduction)
• Screws & Screwdriver (For 2.5-inch Hard Drive Installation)

Product Overview

The front of the device features four drive bays labeled 01, 02, 03, and 04. It also includes a safety lock, power button, power indicator, network indicator, and hard drive indicators.

The rear and top of the device include:

• Magnetic Dust Mesh Filter
• HDMI Port
• USB 3.2 Gen 1 Port
• 2x USB 2.0 Port
• 2.5GbE Ethernet Port
• 10GbE Ethernet Port
• Power Port
• Reset Hole
• QR Code (for binding the device)
• 2x Memory Slot (with one memory module pre-installed)
• Type-C USB 3.2 Gen 2 Port
• SD Card Slot
• 2x M.2 Slot (optional)

Warning: Before inserting or removing any hard drive (including M.2 SSDs) or memory module, please power off the system completely: turn off NAS and disconnect it from the power supply.

Installing 3.5-inch Hard Drives (No Screwdriver Required)

1. Unlock Hard Drive Tray: Use the key to unlock the hard drive tray, press the buckle to pop the handle out, and pull the tray out.
2. Flip drive tray: Flip the tray to the back.
3. Pull the clamp arm: Press the buckle marked with the "Press" icon to pull the arm.
4. Install the drive: Place the drive on the tray. Ensure the four fastening pins on the tray (two on each side) are aligned with the screw holes on the drive. The hard drive pins should face down.
5. Secure the drive: Push back the clamp arm to secure the drive.
6. Load the tray into the bay: Insert the loaded drive tray into the empty drive bay and lock it.

Installing 2.5-inch Hard Drives (Screwdriver Required)

1. Adjust fastening pins: Use the drive tray key to move the rear end fastening pin into the fixed hole near the tray head.
2. Install the drive: Place the drive on the tray. Ensure the holes on the bottom of the drive are aligned with the holes on the tray. The hard drive pins should face down.
3. Secure the drive: Flip the tray to the back, tighten the screws to secure the drive in place.
4. Load the tray into the bay: Insert the loaded drive tray into the empty drive bay and lock it.

Note: For installing 3.5-inch hard drives, please remember to move the fastening pin back to the rear end.

Installing M.2 SSDs (Optional)

M.2 SSDs can be used as a normal storage drive or as a read/write cache to improve reading and writing performance of random data.

1. Power off the NAS device, turn it over, loosen the screws, and remove the bottom panel.
2. Unscrew the M.2 fixing screws.
3. Insert the M.2 SSD into the slot in the direction shown in the image, then tighten the screws.
4. Peel off the film of the silicone pad and stick it on the front-facing surface of the SSD.
5. Reinstall the panel and power on the NAS. After successful boot-up, go to the "UGREEN NAS" app to set the SSD cache.

Warning: To avoid data loss, please remove the SSD cache in the "UGREEN NAS" before removing any M.2 SSD. This will provide added protection in case the system is using it for caching.

Powering On

Use an Ethernet cable to connect the NAS to a LAN port on a router. Connect the power supply to the device, then short press the power button to turn it on.

Tips: After powering on, you can download the "UGREEN NAS" app and go to "Control Panel" > "Hardware & Power" to select automatic startup after powering on.

Warning: To avoid potential fires, explosions, or other electrical hazards, please do NOT use non-UGREEN power adapters or uncertified power adapters.

Indicator & Buzzer Description

Indicator

Buzzer

Web Client-Binding & Settings

Step 1: Add Device

1. Please ensure that the NAS device and computer are on the same local area network (LAN), then visit the URL: find.ugnas.com.
2. The system will automatically search for devices in your current LAN.
3. Select the device you want to add and click "Connect".

Step 2: Initialize the Device

1. After adding the device, you will enter the initialization settings interface.
2. In this interface, please complete the following operations:
   • Name the device: Name your device to ensure it is easy to identify and manage.
   • Create a local administrator account: Register a local administrator account for the device to manage the device.
   • Register and bind UGREEN Cloud account (optional): If you want to use additional functions such as UGREENlink and Quick Login, you can choose to register a UGREEN Cloud account and bind your device. If not, you can choose to skip this step and use only the local account to log in to the device.
3. After completing the above operations, please check the "Update system" option (required) and the "Device analysis improvement plan" option (not required), then you can start using the device.

Note: If the device does not undergo the initialization process, its status will be displayed as "Not Initialized".

Step 3: Set up Storage Mode

Enter the "UGREEN NAS" > "Storage Manager", then you can set up storage mode and configure storage space.

Phones/Tablets & Other Devices—Binding & Settings

1. Application Download

• Option 1: Scan the QR code below or the QR code on the device using your phone to install the "UGREEN NAS" app.
• Option 2: Go to UGREEN's official website (https://nas.ugreen.com/download), download and install the corresponding application.

2. Binding & Settings

Step 1: Add Device

1. Please ensure that the NAS device and your phone or computer are on the same LAN.
2. Open "UGREEN NAS". The system will automatically search for devices. You can also add a device by scanning the QR code on the bottom of the device.
3. Select the device you want to add and click "Connect".

Step 2: Initialize the Device

1. After adding the device, you will enter the initialization settings interface.
2. In this interface, please complete the following operations:
   • Name the device: Name your device to ensure it is easy to identify and manage.
   • Create a local administrator account: Register a local administrator account for the device to manage the device.
   • Register and bind UGREEN Cloud account (optional): If you want to use additional functions such as UGREENlink and Quick Login, you can choose to register a UGREEN Cloud account and bind your device. If not, you can choose to skip this step and use only the local account to log in to the device.
3. After completing the above operations, please check the "Update system" option (required) and the "Device analysis improvement plan" option (not required), then you can start using the device.

Note: If the device does not undergo the initialization process, its status will be displayed as "Not Initialized".

Step 3: Set up Storage Mode

Enter the "UGREEN NAS" > "Storage Manager", then you can set up storage mode and configure storage space.

Device Sharing

Option 1 (the invited user and NAS are on the same network):

The administrator logs in to "UGREEN NAS" > enters "Control Panel" > "User Management" > "Add" to create a new user account, and provides the account and password to the invited user. The invited user logs in to the "UGREEN NAS", searches for the device via the LAN, then enters the account password to activate the account and bind the device.

Option 2 (the invited user and NAS are not on the same network):

Firstly, the administrator enables the UGREENlink online service, then logs in to the "UGREEN NAS", enters "Control Panel" > "User Management" > "Invite" to enable the invitation settings, and copies the invitation link to the invited users. When invited users open the link, enter the account information, then they can apply to access the device.

Note: UGREENlink online service is an external network access service provided by "UGREEN NAS", allowing you to access the app without needing to adjust complicated network settings.

Reset Network & Password

When the NAS device is turned on, use a pin-like object to insert and hold the "RESET" hole for 5 seconds until you hear the buzzer beeping. The device will not restart during the reset process. After the reset is complete, the solid white network indicators will turn on, indicating that the device is ready for use.

Please note that the reset will not affect the data stored in the hard drive. After successful resetting, you can log in to the system with the "admin" account and blank password (this account is specifically utilized for password resets). Once logged in, follow the step-by-step wizard to configure your administrator password.

Features Description

UGREENlink Service: An extranet access service provided by UGREEN NAS, allowing users to remotely access the NAS device under an external network environment. Once enabled, users can directly access data through the PC, browser, and mobile app without adjusting complicated network settings.

M.2 Capability Extension: After installing the M.2 SSD, users can set up a high-speed storage or use it as a cache to enhance read/write performance. For detailed introduction and installation methods, please go to "UGREEN NAS" > "Help Center" > "Knowledge Center".

File Manager: A powerful tool that efficiently manages all files on your device, offering convenient functions for file sharing and uploading. File Manager also includes other practical features like flexible folder permission settings and remote server access, enhancing the convenience of your file management experience.

Sync & Backup: The sync function guarantees consistent data synchronization between the UGREEN NAS application and your entire device ecosystem: PCs, file servers, as well as other Ugreen NAS devices. Additionally, the comprehensive backup feature offers reliable data protection, minimizing the risk of accidental loss. Users have the flexibility to select backup targets according to their specific needs, such as the local UGREEN NAS device, file server, PCs, or phones, ensuring personalized backup requirements are met.

Album: Seamlessly manage and share precious moments through this intuitive album application. Rediscover the joy of browsing through old photos as Album enables effortless navigation through an extensive media and photographic library. Album also allows you to organize photos by categorizing the people in them and creating personalized albums. Keep all your cherished memories preserved for a lifetime and more.

Video Center: Video Center is a comprehensive film and television media service application designed exclusively for home users, offering an unparalleled multimedia experience. Seamlessly manage your personal collection of films and TV shows, create captivating poster walls, and easily project your favorite content onto TVs or projectors. Whether it is a special moment shared with loved ones or videos of a private getaway, the Video Center promises an unforgettable audio-visual adventure for all.

Music: A feature-rich application tailored for music enthusiasts. With the Music, easily organize and navigate through your musical collection, ensuring that all your favorite tracks are at your fingertips. Craft personalized playlists to suit any mood or occasion, for a fully immersive experience in superior sound quality.

Notices

• Please place the NAS device as referred to in the illustrations in this manual. Do not turn the device upside down, or place it upright while operating.
• Please put the NAS in an environment with a stable temperature and low humidity. Avoid direct sunlight or any liquids coming into contact with the device.
• In the event of a thunderstorm or inconsistent voltage, power off the device to avoid potential damage.
• Keep the device away from heat sources or humid environments to reduce the risk of fire or electric shock.
• Do not insert foreign objects into the NAS to avoid damage caused by abnormal use or short circuit.
• Please power off the NAS device before cleaning. When cleaning, use a moist wipe. Do not use chemicals or spray cleaners.
• Do not drop, squeeze, violently impact, or throw the NAS.
• This device contains small parts and pieces, please keep it out of reach of children to prevent choking due to unintended swallowing.
• Do not dismantle or fix the NAS device by yourself. Improper disassembly and assembly may cause electric shock or other safety hazards. If repair or replacement parts and/or accessories are required, please contact UGREEN customer service.

WARNING

INGESTION HAZARD: This product contains a button cell or coin battery. DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.

• KEEP new and used batteries OUT OF REACH of CHILDREN
• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

Battery Handling Instructions:

1. Remove and immediately recycle or dispose of used battery according to local regulations and keep away from children. Do NOT dispose of battery in household trash or incinerate.
2. Even used battery may cause severe injury or death.
3. If the battery has been accidentally swallowed or placed inside any part of the body, it may cause severe internal burns or other hazards. Call a local poison control center for treatment information.
4. This product contains a non-replaceable battery of the type CR2032 (3.0 Vdc).
5. Non-rechargeable battery is not to be recharged.
6. Do not force discharge, recharge, disassemble, heat above 85°C or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
7. Do not dismantle, open or shred secondary cells or batteries.
8. Do not expose battery to heat, fire, or direct sunlight.
9. Do not short-circuit a cell or a battery. Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
10. Do not subject cells or batteries to mechanical shock. In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
11. Do not use any charger other than that specifically provided for use with the equipment.
12. Always purchase the battery recommended by the device manufacturer for the equipment.
13. Keep clean and dry.
14. Retain the original product literature for future reference.
15. Use only the cell or battery in the application for which it was intended.
16. Dispose of properly.
17. BATTERY WARNING: KEEP OUT OF REACH OF CHILDREN.
18. Do not ingest batteries as it can result in a Chemical Burn Hazard.
19. This product contains a coin/button cell battery. If the coin or button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
20. Example information on symptoms from battery ingestion: No obvious symptoms. Unfortunately, it is not obvious when a button or coin battery is stuck in a child's oesophagus (food pipe). There are no specific symptoms associated with this. The child might: cough, gag or drool a lot; appear to have a stomach upset or a virus; be sick; point to their throat or stomach; have a pain in their abdomen, chest or throat; be tired or lethargic; be quieter or more clingy than usual or otherwise "not themselves"; lose their appetite or have a reduced appetite; and not want to eat solid food/be unable to eat solid food. These sorts of symptoms vary or fluctuate, with the pain increasing and then subsiding. A specific symptom to button and coin battery ingestion is vomiting fresh (bright red) blood. If the child does this seek immediate medical help. The lack of clear symptoms is why it is important to be vigilant with "flat" or spare button or coin batteries in the home and the products that contain them.

Specifications