ഉള്ളടക്കം മറയ്ക്കുക
1 BOLD Source 60 Standard Low Voltagഇ ട്രാൻസ്ഫോർമർ
2 സ്പെസിഫിക്കേഷനുകൾ
3 ഉൽപ്പന്ന ഉപയോഗ നിർദ്ദേശങ്ങൾ
4 പതിവുചോദ്യങ്ങൾ
5 പ്രമാണങ്ങൾ / വിഭവങ്ങൾ
5.1 റഫറൻസുകൾ

BOLD-ലോഗോ

BOLD Source 60 Standard Low Voltagഇ ട്രാൻസ്ഫോർമർ

BOLD-Source-60-Standard-Low-Voltagഇ-ട്രാൻസ്‌ഫോർമർ-ഉൽപ്പന്നം

സ്പെസിഫിക്കേഷനുകൾ

  • Model: Source 60 & Source 180
  • Transformer Type: Low-voltage
  • Available VA: 60VA, 180VA
  • Features: Day photocell, astronomical clock
  • Modes: On/Off, Timer, Auto, Astro

ഉൽപ്പന്ന ഉപയോഗ നിർദ്ദേശങ്ങൾ

ഓൺ/ഓഫ് മോഡ്

മോഡിൽ: The lights are on and will stay on.

  1. മെനു അമർത്തുക
  2. The modes will appear on the screen
  3. Navigate to ON using MENU
  4. The transformer will stay ON until another setting is selected

ഓഫ് മോഡ്: The lights are off and will stay off.

  1. മെനു അമർത്തുക
  2. The modes will appear on the screen
  3. Navigate to OFF using MENU
  4. The transformer will stay OFF until another setting is selected

ഓട്ടോ മോഡ്

യാന്ത്രിക മോഡ്: The lights turn on at sunset and off at sunrise.

  1. മെനു അമർത്തുക
  2. The modes will appear on the screen
  3. Navigate to AUTO using MENU
  4. The transformer will turn on at sunset and off at sunrise

Setting Up Source 60 & Source 180
After installation, set the date, time, and location manually.

Setting Date/Time:

  1. Press MENU and DOWN button simultaneously
  2. The first digit on the date will flash
  3. Use UP and DOWN arrows to adjust the digit
  4. Press ENTER once the correct digit is set
  5. Repeat for all digits to set the date

The Source 60 & Source 180

  • The Source is BOLD’s standard low-voltage transformer. It is available in 60VA and 180VA. Integrated directly into the transformer is a day photocell and an astronomical clock.
  • The settings can be adjusted via the control panel on the front of the transformer, allowing for customization through the 4 embedded modes: On/Off, Timer, Auto, and Astro Mode.

ഓൺ/ഓഫ്

  • This turns the power supply on and leaves it on. The lights will stay on until another mode is selected or manually turned off.

ഓട്ടോ

  • The Auto Mode utilizes the photocell built into the front of the transformer. The lights will turn on when the transformer detects that it is starting to get dark outside and stay on for a set number of hours.

ടൈമർ

  • The Timer Mode allows you to schedule a time when you want your lights to turn on and a set a time for when you want them to turn off (the time must be set for this mode to work properly).

ആസ്ട്രോ

  • The Astro Mode turns the system and lights on and off according to the sunrise/sunset time (the location must be set for this mode to work properly).

How to Use On/Off Mode

മോഡിൽ
On Mode means that the lights are on and will stay on.

പടികൾ

  1. മെനു അമർത്തുക
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to ON
  4. The transformer will now stay ON until another setting is selected

കുറിപ്പ്: ON Mode will override any other modes or timers that have been set up

ഓഫ് മോഡ്
Off Mode means that the lights are off and will stay off.

പടികൾ

  1. മെനു അമർത്തുക
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to OFF
  4. The transformer will now stay OFF until another setting is selected

കുറിപ്പ്: OFF Mode will override any other modes or timers that have been set up

ഓട്ടോ മോഡ് എങ്ങനെ ഉപയോഗിക്കാം
Auto-Mode utilizes the built-in photocell on the front of the transformer to turn the lights on at sunset and off at sunrise. Note: the transformer must be placed where the photocell can accurately detect daylight for this mode to work accurately.

ഓട്ടോ മോഡ്
Auto Mode means that the lights will turn on and off at sunset and sunrise.

പടികൾ

  1. മെനു അമർത്തുക
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to AUTO
  4. The transformer will turn on when the sun sets and off when the sun rises

How to Set Up the Source 60 & Source 180
Once the transformer is installed, you need to set the date, time, and location. Because this is a standard transformer (not controlled via Bluetooth or Wifi), this manual process ensures that your transformer behaves accordingly to the mode you set it to.

How to set up the date/time:

കുറിപ്പ്: It sets the day first, then month, then year, then time.

പടികൾ

  1. Press the MENU and DOWN button at the same time
  2. The first digit on the date will start flashing
  3. Use the UP and DOWN arrows to increase/decrease the digit
  4. Hit ENTER once you’ve found the digit you want
  5. Repeat steps 3 and 4 for all the digits to set the proper date
  6. Once you have all the digits of the date set, press ENTER
  7. The first digit on the time will start flashing
  8. Use the UP and DOWN arrows to increase/decrease the digit
    കുറിപ്പ്: the Source transformers utilize a 24-hr clock
  9. Hit ENTER once you’ve found the digit you want
  10. Repeat steps 8 and 9 for all the digits to set the proper time
  11. എന്റർ അമർത്തുക
  12. Once the numbers stop flashing, the date/time has been set

To set the location:

പടികൾ

  1. Press the UP and ENTER button at the same time
  2. The location number will start flashing
  3. Use the UP and DOWN buttons select the proper location code (see: Location Code page) based on the closest major city to you
  4. എന്റർ അമർത്തുക
  5. Once the number stops flashing, the location has been set

How to Use Timer Mode
Timer-mode allows you to set the exact time you want the lights to turn on and the exact time you want them to turn off. Note: the current time must be set on the transformer in order for this setting to work accurately (see: How to set the date/time).

ടൈമർ മോഡ്
Timer Mode means that the lights will turn on and off at the exact time you set.

പടികൾ

  1. മെനു അമർത്തുക
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to TIMER
  4. എന്റർ അമർത്തുക
  5. START TIME will appear on the left side of the screen and the first set of digits will start flashing
  6. Use the UP and DOWN arrows to set the hour
    ഓർമ്മപ്പെടുത്തൽ: the Source transformer utilizes at 24hr clock
  7. എന്റർ അമർത്തുക
  8. Use the UP and DOWN arrows to set the first digit of the minutes
  9. എന്റർ അമർത്തുക
  10. Use the UP and DOWN arrows to set the second digit of the minutes
  11. എന്റർ അമർത്തുക
  12. END TIME will appear on the left side of the screen and the first set of digits will start flashing
  13. 6-11 ഘട്ടങ്ങൾ ആവർത്തിക്കുക
  14. The transformer will now turn on at the set start time and off and the set end time.

കുറിപ്പ്: the transformer will only turn on when the start time matches the current time. For example: if you set the start time to 20:00 but it is currently 21:00, it will be 23hrs before the routine runs and turns the transformer on.

How to Use Astro Mode
The Astro Mode turns the lights on and off according to the local sunrise and sunset time (the time the lights turn on can be adjusted +/- one hour). Note: the proper location code must be select in order for this mode to work accurately (see: How set the location)

ആസ്ട്രോ മോഡ്
Astro Mode means that the lights will turn on and off according to the local sunrise and sunset time.

പടികൾ

  1. മെനു അമർത്തുക
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to ASTRO

See next page for additional steps if you want the lights to turn on/off slightly before/after sunrise and/or sunset

How to Use Astro Mode – Customize Light Settings
Optional (if you want the lights to turn on/off slightly before sunrise and/or sunset)

പടികൾ

  1. മെനു അമർത്തുക
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to ASTRO
  4. എന്റർ അമർത്തുക
  5. A small sunset icon will appear in the bottom left corner of the screen
  6. This indicates that you are adjusting the time for when your lights will turn on at sunset
  7. At the same time, a “- -” or a “+ +” sign will flash in the digits area
  8. Use the UP or DOWN button to change the digits to be the “- -” sign
  9. This indicates that you are adjusting how many minutes you would like the transformer to come on before sunset
  10. This function is capped at +/- 59 minutes. If you would like to customize the time further, we recommend using the Timer Mode
  11. എന്റർ അമർത്തുക
  12. Use the UP and DOWN arrows to select the first digit of how many minutes before sunset you would like the lights to come on
  13. എന്റർ അമർത്തുക
  14. Use the UP and DOWN arrows to select the second digit of how many minutes before sunset you would like the lights to come on
  15. എന്റർ അമർത്തുക
  16. A small sunrise icon will appear in the bottom left corner of the screen
  17. This indicates that you are adjusting the time for when your lights will turn off at sunrise
  18. At the same time, a “- -” or a “+ +” sign will flash in the digits area
  19. Use the UP or DOWN button to change the digits to be the “- -” sign
  20. This indicates that you are adjusting how many minutes you would like the transformer to turn off before sunrise
  21. This function is capped at +/- 59 minutes. If you would like to customize the time further, we recommend using the Timer Mode
  22. എന്റർ അമർത്തുക
  23. Use the UP and DOWN arrows to select the first digit of how many minutes before sunrise you would like the lights to turn off
  24. എന്റർ അമർത്തുക
  25. Use the UP and DOWN arrows to select the second digit of how many minutes before sunrise you would like the lights to turn off
  26. എന്റർ അമർത്തുക

How to Use Astro Mode – Customize Light Settings
Optional (if you want the lights to turn on/off slightly after sunrise and/or sunset)

പടികൾ

  1. മെനു അമർത്തുക
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to ASTRO
  4. എന്റർ അമർത്തുക
  5. A small sunset icon will appear in the bottom left corner of the screen
  6. This indicates that you are adjusting the time for when your lights will turn on at sunset
  7. At the same time, a “- -” or a “+ +” sign will flash in the digits area
  8. Use the UP or DOWN button to change the digits to be the “+ +” sign
  9. This indicates that you are adjusting how many minutes you would like the transformer to come on after sunset
  10. This function is capped at +/- 59 minutes. If you would like to customize the time further, we recommend using the Timer Mode
  11. എന്റർ അമർത്തുക
  12. Use the UP and DOWN arrows to select the first digit of how many minutes after sunset you would like the lights to come on
  13. എന്റർ അമർത്തുക
  14. Use the UP and DOWN arrows to select the second digit of how many minutes after sunset you would like the lights to come on
  15. എന്റർ അമർത്തുക
  16. A small sunrise icon will appear in the bottom left corner of the screen
  17. This indicates that you are adjusting the time for when your lights will turn off at sunrise
  18. At the same time, a “- -” or a “+ +” sign will flash in the digits area
  19. Use the UP or DOWN button to change the digits to be the “+ +” sign
  20. This indicates that you are adjusting how many minutes you would like the transformer to turn off after sunrise
  21. This function is capped at +/- 59 minutes. If you would like to customize the time further, we recommend using the Timer Mode
  22. എന്റർ അമർത്തുക
  23. Use the UP and DOWN arrows to select the first digit of how many minutes after sunrise you would like the lights to turn off
  24. എന്റർ അമർത്തുക
  25. Use the UP and DOWN arrows to select the second digit of how many minutes after sunrise you would like the lights to turn off
  26. എന്റർ അമർത്തുക
  27. Once all the digits have stopped flashing, your +/- time before/after sunset/sunrise has been set

കുറിപ്പ്: if you do not want to add or subtract additional time before/after sunrise or sunset, ensure that your “- -” and/or “+ +” is set to 00.

Source 60 & 180

Location Codes

കാനഡ

  • Vancouver: 01
  • Toronto: 02
  • Montreal: 03
  • Edmonton: 04
  • Regina: 05
  • Winnipeg: 06
  • Thunder Bay: 07
  • Halifax: 08
  • St John’s: 09
  • Ottawa: 10

യുഎസ്എ

  • New York City: 11
  • Los Angeles: 12
  • Portland: 13
  • Phoenix: 14
  • Denver: 15
  • Dallas: 16
  • Minneapolis: 17
  • Chicago: 18
  • Atlanta: 19
  • Nashville: 20
  • Tampa Bay: 21
  • Miami: 22
  • Detroit: 23

IMMEDIATE SUPPORT

എന്തെങ്കിലും ചോദ്യങ്ങളുണ്ടോ?

boldpros.com

BOLD-Source-60-Standard-Low-Voltagഇ-ട്രാൻസ്‌ഫോർമർ-ചിത്രം-1

പതിവുചോദ്യങ്ങൾ

Q: How do I know if the Auto Mode is working accurately?

A: Ensure that the transformer is placed where the photocell can detect daylight properly for Auto Mode to function accurately.

Q: Can I override other modes with the On/Off Mode?

A: Yes, selecting On or Off Mode will override any other modes or timers that have been set up previously.

Q: Do I need to set the location for Astro Mode to work properly?

A: Yes, setting the location is necessary for Astro Mode to function correctly as it operates based on sunrise/sunset times.

പ്രമാണങ്ങൾ / വിഭവങ്ങൾ

BOLD Source 60 Standard Low Voltagഇ ട്രാൻസ്ഫോർമർ [pdf] ഇൻസ്റ്റലേഷൻ ഗൈഡ്
Source 60, Source 60 Standard Low Voltage Transformer, Standard Low Voltagഇ ട്രാൻസ്ഫോർമർ, കുറഞ്ഞ വോളിയംtagഇ ട്രാൻസ്ഫോർമർ, ട്രാൻസ്ഫോർമർ

റഫറൻസുകൾ

ഒരു അഭിപ്രായം ഇടൂ

നിങ്ങളുടെ ഇമെയിൽ വിലാസം പ്രസിദ്ധീകരിക്കില്ല. ആവശ്യമായ ഫീൽഡുകൾ അടയാളപ്പെടുത്തി *