Awọn akoonu tọju
1 BOLD Orisun 60 Standard Low Voltage Ayirapada
2 Awọn pato
3 Awọn ilana Lilo ọja
4 FAQs
5 Awọn iwe aṣẹ / Awọn orisun
5.1 Awọn itọkasi

BOLD-logo

BOLD Orisun 60 Standard Low Voltage Ayirapada

BOLD-Source-60-Standard-Low-Voltage-Transformer-ọja

Awọn pato

  • Awoṣe: Orisun 60 & Orisun 180
  • Amunawa Iru: Low-voltage
  • VA ti o wa: 60VA, 180VA
  • Awọn ẹya ara ẹrọ: Photocell ọjọ, aago astronomical
  • Awọn ọna: Tan/Pa, Aago, Aifọwọyi, Astro

Awọn ilana Lilo ọja

Ipo Tan/Paa

Lori Ipo: The lights are on and will stay on.

  1. Tẹ Akojọ
  2. Awọn ipo yoo han loju iboju
  3. Lilö kiri si ON nipa lilo MENU
  4. The transformer will stay ON until another setting is selected

Paa Ipo: The lights are off and will stay off.

  1. Tẹ Akojọ
  2. Awọn ipo yoo han loju iboju
  3. Lilọ kiri si PA nipa lilo MENU
  4. The transformer will stay OFF until another setting is selected

Ipo Aifọwọyi

Ipo Aifọwọyi: The lights turn on at sunset and off at sunrise.

  1. Tẹ Akojọ
  2. Awọn ipo yoo han loju iboju
  3. Lilö kiri si AUTO nipa lilo MENU
  4. Ayipada yoo tan ni Iwọoorun ati pipa ni Ilaorun

Eto Orisun 60 & Orisun 180
After installation, set the date, time, and location manually.

Ọjọ/Aago Eto:

  1. Tẹ Akojọ aṣyn ati Bọtini isalẹ nigbakanna
  2. Nọmba akọkọ lori ọjọ yoo filasi
  3. Lo awọn itọka si oke ati isalẹ lati ṣatunṣe nọmba naa
  4. Tẹ ENTER ni kete ti ṣeto nọmba to tọ
  5. Tun fun gbogbo awọn nọmba lati ṣeto ọjọ naa

Orisun 60 & Orisun 180

  • Orisun naa jẹ iwọn-kekere ti BOLDtage transformer. O wa ni 60VA ati 180VA. Ijọpọ taara sinu ẹrọ oluyipada jẹ photocell ọjọ kan ati aago astronomical kan.
  • Awọn eto le ṣe atunṣe nipasẹ iṣakoso iṣakoso ni iwaju ti oluyipada, gbigba fun isọdi-ara nipasẹ awọn ipo ifibọ 4: Titan / Paa, Aago, Aifọwọyi, ati Ipo Astro.

Tan/Pa a

  • Eyi yoo tan ipese agbara ti o si fi silẹ. Awọn ina naa yoo wa ni titan titi ipo miiran yoo fi yan tabi paa pẹlu ọwọ.

Aifọwọyi

  • Ipo Aifọwọyi nlo photocell ti a ṣe si iwaju ti oluyipada. Awọn ina yoo tan-an nigbati ẹrọ oluyipada ba rii pe o bẹrẹ lati ṣokunkun ni ita ati duro lori fun nọmba awọn wakati kan.

Aago

  • The Timer Mode allows you to schedule a time when you want your lights to turn on and a set a time for when you want them to turn off (the time must be set for this mode to work properly).

Astro

  • Ipo Astro yi eto ati tan-an ati pipa ni ibamu si akoko ila-oorun/oorun (ipo naa gbọdọ ṣeto fun ipo yii lati ṣiṣẹ daradara).

Bii o ṣe le Lo Titan/Pa Ipo

Lori Ipo
On Mode means that the lights are on and will stay on.

Awọn igbesẹ

  1. Tẹ Akojọ
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to ON
  4. The transformer will now stay ON until another setting is selected

Akiyesi: ON Mode will override any other modes or timers that have been set up

Paa Ipo
Off Mode means that the lights are off and will stay off.

Awọn igbesẹ

  1. Tẹ Akojọ
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to OFF
  4. The transformer will now stay OFF until another setting is selected

Akiyesi: OFF Mode will override any other modes or timers that have been set up

Bii o ṣe le Lo Ipo Aifọwọyi
Ipo Aifọwọyi nlo photocell ti a ṣe sinu iwaju ti oluyipada lati tan awọn ina ni Iwọoorun ati pipa ni Ilaorun. Akiyesi: ẹrọ oluyipada gbọdọ wa ni gbe si ibi ti photocell le rii deede if'oju fun ipo yii lati ṣiṣẹ ni deede.

Ipo Aifọwọyi
Auto Mode means that the lights will turn on and off at sunset and sunrise.

Awọn igbesẹ

  1. Tẹ Akojọ
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to AUTO
  4. The transformer will turn on when the sun sets and off when the sun rises

Bii o ṣe le Ṣeto Orisun 60 & Orisun 180
Ni kete ti a ti fi ẹrọ oluyipada sori ẹrọ, o nilo lati ṣeto ọjọ, akoko, ati ipo. Nitori eyi jẹ oluyipada boṣewa (kii ṣe iṣakoso nipasẹ Bluetooth tabi Wifi), ilana afọwọṣe yii ṣe idaniloju pe ẹrọ oluyipada rẹ huwa ni ibamu si ipo ti o ṣeto si.

How to set up the date/time:

Akiyesi: It sets the day first, then month, then year, then time.

Awọn igbesẹ

  1. Press the MENU and DOWN button at the same time
  2. The first digit on the date will start flashing
  3. Use the UP and DOWN arrows to increase/decrease the digit
  4. Hit ENTER once you’ve found the digit you want
  5. Repeat steps 3 and 4 for all the digits to set the proper date
  6. Once you have all the digits of the date set, press ENTER
  7. The first digit on the time will start flashing
  8. Use the UP and DOWN arrows to increase/decrease the digit
    Akiyesi: the Source transformers utilize a 24-hr clock
  9. Hit ENTER once you’ve found the digit you want
  10. Repeat steps 8 and 9 for all the digits to set the proper time
  11. Tẹ Tẹ
  12. Once the numbers stop flashing, the date/time has been set

Lati ṣeto ipo naa:

Awọn igbesẹ

  1. Press the UP and ENTER button at the same time
  2. The location number will start flashing
  3. Use the UP and DOWN buttons select the proper location code (see: Location Code page) based on the closest major city to you
  4. Tẹ Tẹ
  5. Once the number stops flashing, the location has been set

Bi o ṣe le Lo Ipo Aago
Aago-ipo faye gba o lati ṣeto awọn gangan akoko ti o fẹ awọn imọlẹ lati tan ati awọn gangan akoko ti o fẹ wọn lati wa ni pipa. Akiyesi: akoko lọwọlọwọ gbọdọ wa ni ṣeto sori ẹrọ oluyipada ki eto yii le ṣiṣẹ ni deede (wo: Bii o ṣe le ṣeto ọjọ/akoko).

Ipo Aago
Timer Mode means that the lights will turn on and off at the exact time you set.

Awọn igbesẹ

  1. Tẹ Akojọ
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to TIMER
  4. Tẹ Tẹ
  5. START TIME will appear on the left side of the screen and the first set of digits will start flashing
  6. Use the UP and DOWN arrows to set the hour
    Olurannileti: the Source transformer utilizes at 24hr clock
  7. Tẹ Tẹ
  8. Use the UP and DOWN arrows to set the first digit of the minutes
  9. Tẹ Tẹ
  10. Use the UP and DOWN arrows to set the second digit of the minutes
  11. Tẹ Tẹ
  12. END TIME will appear on the left side of the screen and the first set of digits will start flashing
  13. Tun awọn igbesẹ 6-11 ṣe
  14. The transformer will now turn on at the set start time and off and the set end time.

Akiyesi: the transformer will only turn on when the start time matches the current time. For example: ti o ba ti o ba ṣeto awọn ibere akoko to 20:00 sugbon o jẹ Lọwọlọwọ 21:00, o yoo jẹ 23hrs ṣaaju ki awọn baraku gbalaye ati ki o tan awọn transformer lori.

Bii o ṣe le Lo Ipo Astro
Ipo Astro n tan awọn imọlẹ si tan ati pipa ni ibamu si ila-oorun agbegbe ati akoko iwọ-oorun (akoko ti awọn ina le wa ni tunṣe +/- wakati kan). Akiyesi: koodu ipo to dara gbọdọ jẹ yiyan ki ipo yii le ṣiṣẹ ni deede (wo: Bii o ṣe ṣeto ipo naa)

Ipo Astro
Astro Mode means that the lights will turn on and off according to the local sunrise and sunset time.

Awọn igbesẹ

  1. Tẹ Akojọ
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to ASTRO

Wo oju-iwe ti o tẹle fun awọn igbesẹ afikun ti o ba fẹ ki awọn ina tan-an/pa diẹ ṣaaju/lẹhin ila-oorun ati/tabi Iwọoorun

Bii o ṣe le Lo Ipo Astro – Ṣe akanṣe Eto Imọlẹ
Yiyan (ti o ba fẹ ki awọn ina lati tan/pa diẹ ṣaaju ki oorun ati/tabi Iwọoorun)

Awọn igbesẹ

  1. Tẹ Akojọ
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to ASTRO
  4. Tẹ Tẹ
  5. A small sunset icon will appear in the bottom left corner of the screen
  6. This indicates that you are adjusting the time for when your lights will turn on at sunset
  7. At the same time, a “- -” or a “+ +” sign will flash in the digits area
  8. Use the UP or DOWN button to change the digits to be the “- -” sign
  9. This indicates that you are adjusting how many minutes you would like the transformer to come on before sunset
  10. This function is capped at +/- 59 minutes. If you would like to customize the time further, we recommend using the Timer Mode
  11. Tẹ Tẹ
  12. Use the UP and DOWN arrows to select the first digit of how many minutes before sunset you would like the lights to come on
  13. Tẹ Tẹ
  14. Use the UP and DOWN arrows to select the second digit of how many minutes before sunset you would like the lights to come on
  15. Tẹ Tẹ
  16. A small sunrise icon will appear in the bottom left corner of the screen
  17. This indicates that you are adjusting the time for when your lights will turn off at sunrise
  18. At the same time, a “- -” or a “+ +” sign will flash in the digits area
  19. Use the UP or DOWN button to change the digits to be the “- -” sign
  20. This indicates that you are adjusting how many minutes you would like the transformer to turn off before sunrise
  21. This function is capped at +/- 59 minutes. If you would like to customize the time further, we recommend using the Timer Mode
  22. Tẹ Tẹ
  23. Use the UP and DOWN arrows to select the first digit of how many minutes before sunrise you would like the lights to turn off
  24. Tẹ Tẹ
  25. Use the UP and DOWN arrows to select the second digit of how many minutes before sunrise you would like the lights to turn off
  26. Tẹ Tẹ

Bii o ṣe le Lo Ipo Astro – Ṣe akanṣe Eto Imọlẹ
Yiyan (ti o ba fẹ ki awọn ina lati tan/pa diẹ lẹhin ila-oorun ati/tabi Iwọoorun)

Awọn igbesẹ

  1. Tẹ Akojọ
  2. The modes will appear in boxes on the left side of the screen
  3. Press MENU repeatedly to navigate to ASTRO
  4. Tẹ Tẹ
  5. A small sunset icon will appear in the bottom left corner of the screen
  6. This indicates that you are adjusting the time for when your lights will turn on at sunset
  7. At the same time, a “- -” or a “+ +” sign will flash in the digits area
  8. Use the UP or DOWN button to change the digits to be the “+ +” sign
  9. This indicates that you are adjusting how many minutes you would like the transformer to come on after sunset
  10. This function is capped at +/- 59 minutes. If you would like to customize the time further, we recommend using the Timer Mode
  11. Tẹ Tẹ
  12. Use the UP and DOWN arrows to select the first digit of how many minutes after sunset you would like the lights to come on
  13. Tẹ Tẹ
  14. Use the UP and DOWN arrows to select the second digit of how many minutes after sunset you would like the lights to come on
  15. Tẹ Tẹ
  16. A small sunrise icon will appear in the bottom left corner of the screen
  17. This indicates that you are adjusting the time for when your lights will turn off at sunrise
  18. At the same time, a “- -” or a “+ +” sign will flash in the digits area
  19. Use the UP or DOWN button to change the digits to be the “+ +” sign
  20. This indicates that you are adjusting how many minutes you would like the transformer to turn off after sunrise
  21. This function is capped at +/- 59 minutes. If you would like to customize the time further, we recommend using the Timer Mode
  22. Tẹ Tẹ
  23. Use the UP and DOWN arrows to select the first digit of how many minutes after sunrise you would like the lights to turn off
  24. Tẹ Tẹ
  25. Use the UP and DOWN arrows to select the second digit of how many minutes after sunrise you would like the lights to turn off
  26. Tẹ Tẹ
  27. Once all the digits have stopped flashing, your +/- time before/after sunset/sunrise has been set

Akiyesi: if you do not want to add or subtract additional time before/after sunrise or sunset, ensure that your “- -” and/or “+ +” is set to 00.

Orisun 60 & 180

Awọn koodu ipo

Canada

  • Vancouver: 01
  • Toronto: 02
  • Montreal: 03
  • Edmonton: 04
  • Regina: 05
  • Winnipeg: 06
  • Thunder Bay: 07
  • Halifax: 08
  • St John’s: 09
  • Ottawa: 10

USA

  • New York City: 11
  • Los Angeles: 12
  • Portland: 13
  • Phoenix: 14
  • Denver: 15
  • Dallas: 16
  • Minneapolis: 17
  • Chicago: 18
  • Atlanta: 19
  • Nashville: 20
  • Tampa Bay: 21
  • Miami: 22
  • Detroit: 23

Lẹsẹkẹsẹ support

Ni eyikeyi ibeere?

boldpros.com

BOLD-Source-60-Standard-Low-Voltage-Transformer-ọpọtọ-1

FAQs

Q: Bawo ni MO ṣe mọ boya Ipo Aifọwọyi n ṣiṣẹ ni deede?

A: Ensure that the transformer is placed where the photocell can detect daylight properly for Auto Mode to function accurately.

Q: Ṣe MO le fagilee awọn ipo miiran pẹlu Ipo Titan/Pa?

A: Yes, selecting On or Off Mode will override any other modes or timers that have been set up previously.

Q: Ṣe Mo nilo lati ṣeto ipo fun Ipo Astro lati ṣiṣẹ daradara?

A: Yes, setting the location is necessary for Astro Mode to function correctly as it operates based on sunrise/sunset times.

Awọn iwe aṣẹ / Awọn orisun

BOLD Orisun 60 Standard Low Voltage Ayirapada [pdf] Fifi sori Itọsọna
Orisun 60, Orisun 60 Standard Low Voltage Amunawa, Standard Low Voltage Amunawa, Low Voltage Amunawa, Amunawa

Awọn itọkasi

Fi ọrọìwòye

Adirẹsi imeeli rẹ kii yoo ṣe atẹjade. Awọn aaye ti a beere ti wa ni samisi *