SPARE PARTS MANUAL
MIKASA FORWARD PLATE COMPACTOR MVC-T90H
Version 3.0 (January 2025)
FOR MORE INFORMATION
CONTACT US ON 1300 353 986 OR VISIT flextool.com.au
EXCLUSIVE TO 
PLATE COMPACTOR
MVC-T90H
MVC-T90H VAS
PARTS LIST
405-08602
PARTS REMARK INDEX
How to read the marks and remarks used in this parts book.
Section 1 : Explanation of Code Use In “MRK” Column
OO : Interchangeable between the new part and the old one.
XX : Not Interchangeable between new and old.
OX : New part is usable for the old machine but the old part is not usable for the new machine.
XO : The old part is usable for the new machine but the new part is not usable for the old machine.
Note : In case of the lack of interchangeability between the new part and old part, a new part may be used by replacing all other parts found in the assembly. In this case, refer to section 2 for instruction on identifying other parts involved in a new assembly.
AD : Newly established(added)
DC : Suspended(discontinued)
NC : Part number changed
QC : Quantity used has been changed
NS : Not supplied individually but supplied in an assembly or a group.
AS : Special part designed to allow interchangeability between new and old part.
CR : Correction
Section 2 : Items Found In “Remark” Column
Serial Numbers – Where indicated, this indicates a serial number range (inclusive) where a particular part is used.
Model Number – Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
# or * : All parts with the same number following # or * belong to the same assembly. this part cannot be interchanged individually with any other assemblies to replace an old part (indicated by #), with a new part(indicated by *), then all other parts of that assembly must be replaced with new ones.
Note : If more than one of the same reference number is listed, the last one listed indicates newest(or latest)part available.
Section 3: Example
| REF NO. | PART NO. | PART NAME | Q’TY | MRK | REMARKS |
| 457(1) | 5122-09230 | Hinge Metal, Upper/24g | 1 | -1070 #3 (5) | |
| 457(2) | 5072-09420 | Hinge Metal, Upper M16 | 1 | OX(3) | U1071-(6) * 3(7) |
(1) Old part
(2) New part
(3) New part usable with old machine, but old part not usable with new machine (reference section 1).
(4) Old part number is used through this machine serial number.
(5) Old part, used in an assembly with other parts marked with #3. To use this part on a new machine, all other parts in this assembly must be replaced with old ones.
(6) New part put into use starting with this serial number and is still current.
(7) New part used in an assembly with other parts marked * 3, to use this part as a replacement for an old part, all other * 3 marked parts must be changed at the same time.
Section 4: Items Found In “MK2” Column
(only for suspended products)
! OO (“OO” is shown in figure) : The part shown in lower line is supplied.
! SD : Not available due to termination of production.
! NS : Not supplied individually, but supplied in an assembly or a group.
! PD : Supplied as unit product.
SS : Not available after stock run out.
(The contents of this parts catalog are subject to change without notice.)
MVC-T90H / T90H VAS
4UE0
BODY
2023/10/20
1. BODY
** 4UE **
| REF NO. | PART NO. | PART NAME | Q’TY | MRK | MK2 | REMARKS |
| A | 4169-10120 | VAS HANDLE AY/MVC-T90,88V | 1 | T90H VAS | ||
| 1 | 4161-20141-GR | VIBRATING PLATE AY/T90/GR | 1 | GR/JP,EXP | ||
| 1 | 4161-20142-OR | VIBRATING PLATE AY/T90/OR | 1 | OR/EXP | ||
| 1 | 4161-20143-OP | VIBRATING PLATE AY/T90/OP | 1 | 0JH | OP/EXP | |
| 3 | 9390-10440 | SHOCK ABSORBER 50-45-67 | 4 | SX2 | ||
| 4 | 0203-10080 | NUT M10 | 4 | |||
| 5 | 0302-10250 | SW M10 | 4 | |||
| 7 | 0012-21220 | BOLT 12X20 T | 2 | |||
| 8 | 0311-12230 | PW M12 | 2 | |||
| 10 | 4169-10100 | CLUTCH AY/T90/19.05MM | 1 | INCH SHAFT | ||
| 10-1 | 4164-64490 | CLUTCH DRUM 85/MVC-T90 | 1 | |||
| 10-2 | 4163-51320 | CLUTCH SHOE&BOSS AY/19.05 | 1 | INCH SHZFT | ||
| 10-3 | 0802-00300 | STOP RING S-30 | 1 | |||
| 10-4 | 0801-00550 | STOP RING R-55 | 1 | |||
| 10-5 | 0460-06006 | BEARING 6006DDU | 1 | |||
| 11 | 4161-20390-GR | BASE/MVC-T90/GR | 1 | GR | ||
| 11 | 4161-20399-OR | BASE/MVC-T90/OR | 1 | OR | ||
| 12 | 0012-21025 | BOLT 10X25 T | 4 | |||
| 13 | 0302-10250 | SW M10 | 4 | |||
| 14 | 0012-20850 | BOLT 8X50 T | 4 | |||
| 15 | 0302-08200 | SW M8 | 4 | |||
| 16 | 0311-08160 | PW M8 | 4 | |||
| 17 | 4044-12290 | ENGINE NUT | 1 | |||
| 18 | 4164-66540 | ENGINE NUT(W/BOLT)/T90 | 1 | |||
| 19 | 9594-04350 | EARTH WIRE | 1 | ** | ||
| 20 | 0311-08160 | PW M8 | 1 | |||
| 21 | 0227-10809 | NYLON NUT M8 | 1 | |||
| 22 | 4164-54360 | RUBBER PLATE 25X25X8 | 1 | |||
| 23 | 0701-00332 | V-BELT / RPF-3330 | 1 | |||
| 24 | 4161-20950 | BELT COVER(IN)/MVC-T90 | 1 | |||
| 25 | 4160-10019-OR | BELT COVER-OR /EXP/MVC-T90 | 1 | EXP/OR | ||
| 25 | 4160-10015-GR | BELT COVER-GR /EXP/MVC-T90 | 1 | ** | JP/EXP/GR | |
| 25 | 4160-10040 | BELTCOVER/MQ/MVC88VG | 1 | MQ | ||
| 26 | 0012-20825 | BOLT 8X25 T | 4 | |||
| 27 | 0302-08200 | SW M8 | 5 | |||
| 28 | 0311-08160 | PW M8 | 5 | |||
| 29 | 0012-20820 | BOLT 8X20 T | 1 | |||
| 31 | 4162-18720 | HANDLE /MVC-T90 | 1 | T90H | ||
| 32 | 9524-08710 | COLLAR 13X20X44 ZN/T90 | 2 | ** | ||
| 33 | 4044-33430 | RUBBER 20X32X28.5/52H | 2 | |||
| 34 | 4164-52361 | HANDLE STOPPER /MVC-88 | 2 | SX2 | ||
| 35 | 9524-05600 | WASHER 12.5X35X4.5 | 2 | |||
| 36 | 0012-21253 | BOLT 12X65 T | 2 | |||
| 37 | 0302-12300 | SW M12 | 2 | |||
| 40 | 4161-21010 | VAS HANDLE BODY/MVC-T90,88V | 1 | SS!416 | T90H VAS | |
| 41 | 4162-18770 | GRIP.VAS HANDLE/MVC-T90,88V | 1 | !4169- | T90H VAS | |
| 42 | 4164-59320 | HANDLE NUT,VAS HANDLE/88G | 2 | T90H VAS | ||
| 43 | 4164-59341 | RUBBER,VAS HANDLE/MVC-88G | 2 | T90H VAS | ||
| 44 | 0091-20407 | SUNK HEAD BOLT 10X20 T | 2 | T90H VAS | ||
| 51 | 0012-21025 | BOLT 10X25 T | 4 | |||
| 52 | 0302-10250 | SW M10 | 4 | |||
| 53 | 4169-10170 | GUARD,HOOK CP/T90H | 1 | |||
| 53 | 4169-10170 | GUARD,HOOK CP/T90H | 1 | T/H METER | ||
| 53 | 4161-21740 | GUARD,HOOK/T90HC | 1 | GX160UT2QMXC | ||
| 81 | 9122-16015 | ENGINE AY/GX160UT2-QMX2 | 1 | !9122- | INCH SHAFT | |
| 81 | 9122-16021 | ENGINE AY/GX160UT2-QMXC | 1 | XX | !9122- | INCH SHAFT |
| 81 | 9122-16025 | ENGINE /GX160UT2-QCM | 1 | |||
| 92 | 90745-ZE1-600 | KEY 4.78X4.78X38 | 1 | |||
| 93 | 4164-52809 | SPACER 19.05-25-15.6 | 1 | |||
| 94 | 9524-00130 | WASHER 9304 | 1 | ** | ||
| 95 | 0091-10004 | SOCKET HEAD BOLT 5/16X24 | 1 |
4UF0
VIBRATOR
2023/10/20
2. VIBRATOR
** 4UF **
| REF NO. | PART NO. | PART NAME | Q’TY | MRK | MK2 | REMARKS |
| 1 | 4161-20141-GR | VIBRATING PLATE AY/T90/GR | 1 | GR/JP,EXP | ||
| 1 | 4161-20142-OR | VIBRATING PLATE AY/T90/OR | 1 | OR/EXP | ||
| 1 | 4161-20143-OP | VIBRATING PLATE AY/T90/OP | 1 | 0JH | OP/EXP | |
| 1-A | 4169-10150-GR | VIB-PL. W/VIB. CP T90/GR | 1 | SX1 | INC,1-22/GR | |
| 1-A | 4169-10180-OR | VIB-PL. W/VIB. CP/T90/OR | 1 | INC,1-22/OR | ||
| 1-A | 4169-10190-OP | VIB-PL. W/VIB. CP T90/OP | 1 | INC,1-22/OP | ||
| 2 | 9534-05270 | PLUG 1/4X14 13L | 1 | |||
| 3 | 9534-05260 | PACKING 1/4 (CU) | 1 | ** | ||
| 8 | 4162-18390 | ECCENTRIC ROTATOR/T90 | 1 | SX | ||
| 9 | 0404-06211 | BEARING 6211C4 | 2 | |||
| 10 | 4163-38909 | CASECOVER(R)/MVC-T90 | 1 | |||
| 11 | 4163-38919 | CASE COVER(L)/MVC-T90 | 1 | |||
| 12 | 4163-49931 | BELT COVER GUARD/T90 | 1 | SX2 | ||
| 13 | 0604-03060 | OIL SEAL TC-35488 | 1 | SX2 | ||
| 14 | 0501-01000 | O-RING G-100 | 2 | |||
| 15 | 0012-20820 | BOLT 8X20 T | 8 | |||
| 16 | 0302-08200 | SW M8 | 8 | |||
| 18 | 4164-64470 | PULLEY 81-28/T90 | 1 | |||
| 19 | 9514-05240 | KEY 7X7X19 R | 1 | ** | ||
| 20 | 9524-04250 | WASHER 11X40X4 | 1 | ** | ||
| 21 | 0012-21025 | BOLT 10X25 T | 1 | |||
| 22 | 0302-10250 | SW M10 | 1 |
4UG0
TRANSPORT WHEEL (OPTION)
2023/10/20
3. TRANSPORT WHEEL
** 4UG **
| REF NO. | PART NO. | PART NAME | Q’T | MRK | MK2 | REMARKS |
| 20 | 0012-20620 | BOLT 6X20 T | 1 | |||
| 21 | 0302-06150 | SW M6 | 1 | |||
| 22 | 0203-06050 | NUT M6 | 1 | |||
| 23 | 0311-06100 | PW M6 | 1 | |||
| 31 | 0012-21030 | BOLT 10X30 T | 4 | |||
| 32 | 0302-10250 | SW M10 | 4 | |||
| 33 | 4164-66680 | SPACER,WHEEL/MVC-T90 | 1 | |||
| 34 | 4163-52490 | BRACKETS,WHEEL/T90 | 1 | |||
| 35 | 0012-21035 | BOLT 10X35 T | 2 | |||
| 36 | 0311-10160 | PW M10 | 6 | |||
| 37 | 0321-10180 | CONICAL SPRING WASHER M10 | 4 | |||
| 38 | 0203-10080 | NUT M10 | 2 | |||
| 39 | 0204-10060 | NUT M10, H=6 | 2 | |||
| 41 | 4162-18830 | VEHICLE AXLE/MVC-T90 | 1 | SX | ||
| 41 | 4162-19520 | VEHICLE AXLE/T90HC | 1 | GX160UT2QMXC | ||
| 42 | 9594-11020 | WHEEL 12DX125X42B/T90 | 2 | |||
| 43 | 9524-00130 | WASHER 9304 | 2 | ** | ||
| 44 | 0203-08060 | NUT M8 | 2 | |||
| 45 | 0302-08200 | SW M8 | 2 | |||
| 47 | 9390-10270 | STOPPER RUBBER ( 70 ) /MT | 1 | |||
| 48 | 0203-08060 | NUT M8 | 1 | |||
| 50 | 4164-67230 | STOPPER,LOCK PIN/MVC-T90 | 1 | |||
| 51 | 0012-20620 | BOLT 6X20 T | 2 | |||
| 52 | 0302-06150 | SW M6 | 2 | |||
| 53 | 0203-06050 | NUT M6 | 2 | |||
| 55 | 4163-51700 | LOCK HOLDER,WHEEL/T90 | 1 | |||
| 56 | 4164-66690 | LOCK PIN,WHEEL/MVC-T90 | 1 | |||
| 57 | 4584-50880 | SPRING 1.2-10-29 /MVH-120 | 1 | |||
| 58 | 4164-67240 | LOCK KNOB,WHEEL/MVC-T90 | 1 | |||
| 59 | 0254-03016 | SPRING PIN 3X16 | 1 | |||
| 61 | 9524-08960 | WASHER 6.5X16X1 | 2 | ** | ||
| 62 | 9524-08980 | COLLAR 6.2X9X4 ZN | 1 | ** | ||
| 63 | 4194-66670 | LOCKWIRE, HANDLE /MVC-T90 | 1 | |||
| 70 | 0012-20625 | BOLT 6X25 T | 1 | |||
| 71 | 0302-06150 | SW M6 | 1 | |||
| 72 | 0203-06050 | NUT M6 | 1 |
4UH0
SPRINKING EQUIPMENT (OPTION)
2023/10/20
4. SPRINKING EQUIPMENT(OPTION)
** 4UH **
| REF NO. | PART NO. | PART NAME | Q’TY | MRK | MK2 | REMARKS |
| 1 | 4169-10110 | WATER TANK W/CAP(OR/T90) | 1 | !PD | ORANGE | |
| 1 | 4169-10130 | WATER TANK W/CAP(GR/T90) | 1 | !PD | GREEN | |
| 1 | 4169-10140 | WATER TANK W/CAP(W/T90) | 1 | !PD | WHITE | |
| 2 | 0339-10050 | WASHER 14.5X30X1.6 | 1 | |||
| 3 | 9534-06390 | PACKING 13X28X2 | 1 | ** | 1 OR 2 | |
| 4 | 9544-03241 | COCK PT1/4, BH-1211(AL)/R | 1 | SX2 | ||
| 5 | 4163-38930 | SPRINKLING PIPE /MVC-88 | 1 | |||
| 6 | 4163-38940 | PIPE HOLDER (L) /MVC-88 | 1 | SX | ||
| 7 | 4164-52750 | PIPE HOLDER (R) /MVC-88 | 1 | |||
| 9 | 0012-20825 | BOLT 8X25 T | 2 | |||
| 11 | 4164-52790 | STAY, PIPE HOLDER /MVC-88 | 1 | |||
| 12 | 9543-00343 | CAP,WATER TANK(NBR) | 1 | SX2 | ||
| 13 | 0012-41030 | BOLT 10X30 U | 1 | |||
| 14 | 0339-10160 | PW M10(SUS) | 2 | |||
| 15 | 0229-10270 | NYLOC NUT M10(SUS) | 1 | |||
| 16 | 0311-08160 | PW M8 | 1 |
4UI0
BLOCK PLATE (OPTION)
2023/10/20
5. BLOCK PLATE(OPTION)
** 4UI **
| REF NO. | PART NO. | PART NAME | Q’TY | MRK | MK2 | REMARKS |
| 1 | 4163-52080 | HANGER(BLOCK PLATE)/T90 | 1 | SS!PD | T90H VAS | |
| 2 | 0012-21230 | BOLT 12X30 T | 2 | T90H VAS | ||
| 3 | 0302-12300 | SW M12 | 2 | T90H VAS | ||
| 4 | 4163-52090 | PLATE (BLOCK PLATE)/T90 | 1 | SS!PD | T90H VAS | |
| 5 | 0012-20835 | BOLT 8X35 T | 4 | T90H VAS | ||
| 6 | 0227-10809 | NYLON NUT M8 | 4 | T90H VAS | ||
| 7 | 4163-42390 | RUBBER MAT(BLOCK PLATE) | 1 | PD | !PD | NON-SALE |
4UJ0
NAME PLATES
“A” decal includes 3~6. 
2023/10/20
6. NAME PLATES
** 4UJ **
| REF NO. | PART NO. | PART NAME | Q’TY | MRK | MK2 | REMARKS |
| A | 9209-00090 | DECAL,SET/MVC-MCD/EXP,EU | 1 | ** | INCL.3-6 | |
| 1 | 9202-21410 | SERIAL NO. PLATE/T90H/5CE | 1 | 5LANGUAGES | ||
| 1 | 9202-21420 | SERIAL NO. PLATE/T90HVAS5 | 1 | 5LANGUAGES | ||
| 2 | 9202-18170 | DECAL,POSITION,APO./T90 | 1 | ** | ||
| 3 | 9202-14730 | DECAL,DO NOT LIFTING | 1 | SET | !R0449 | 9209-00090 |
| 4 | 9202-14740 | DECAL,LIFTING POSITION | 1 | SET | !R0449 | 9209-00090 |
| 5 | 9202-14790 | DEAL,CAUTION ICONS | 1 | SET | !!9209 | 9209-00090 |
| 6 | 9202-14800 | DECAL,ENGINE HANDLING /GS | 1 | SET | !9209- | 9209-00090 |
| 13 | 9202-08350 | DECAL,V-BELT RPF3330 | 1 | ** | ||
| 21 | 9202-18750 | DECAL, CAUTION | 1 | MQ | ||
| 22 | 9202-18740 | DECAL, CAUTION | 1 | MQ | ||
| 31 | 9201-01410 | DECAL, MIKASA MARK 120X60 | 1 | |||
| 32 | 9201-14000 | DECAL,MIKASA(125MM)BLACK | 1 | ** | ||
| 41 | 9202-06290 | DECAL,CAUTION(MANUAL/EXP | 1 | MQ | ||
| 43 | 9202-12320 | DECAL,FUEL CAUTION/MVC | 1 | MQ | ||
| 53 | 9202-18770 | DECAL,E/G FIRE WARNING | 1 | MQ | ||
| 54 | 9202-20740 | DECAL HANDLE AY/CAUTION | 1 | MQ | ||
| 91 | 9202-15500 | DECAL, HUTTER 30 X 140 | 1 | HUTTER | ||
| 92 | 9202-11220 | DECAL, HUTTER MARK D60 | 1 | HUTTER | ||
| 111 | 9202-07820 | DECAL, IMER | 1 | SS!0JH | IMER | |
| 121 | 9202-10330 | DECAL,EC NOISE REQ.LWA105 | 1 | |||
| 131 | 9202-18190 | DECAL, HUTTER 40X230/T90H | 1 | HUTTER | ||
| 201 | 87519-Z4H-010 | MARK,OP-CAUTION(PICTO) | 1 | EU GX160 | ||
| 203 | 87539-Z4M-800 | MARK.EX.CAUTION(PICTOGRAP | 1 | EU GX160 |
4YN0
TACHO&HOUR METER (OPTION)
2023/10/20
7. TACHO&HOUR METER(OPTION)
** 4YN **
| REF NO. | PART NO. | PART NAME | Q’TY | MRK | MK2 | REMARKS |
| 1 | 9550-10319 | TP-22 TACHO/HOUR METER | 1 | |||
| 2 | 0091-10101 | PAN HEAD SCREW 5X25 | 2 | |||
| 3 | 0302-05130 | SW M5 | 2 | |||
| 5 | 9550-10310 | CURL CORD/L340/88VTH | 1 | ** | ||
| 6 | 9590-26822 | RUBBER TUBE / D4.5-230 | 1 | ** | ||
| 7 | 5070-10110 | CLAMP AB200-W | 1 | SX2 | ||
| 10 | 9550-10307 | CLIP BELT/TP-22 | 1 | ** | ||
| 11 | 4169-10170 | GUARD,HOOK CP/T90H | 1 | |||
| 12 | 9524-09910 | COLLAR 6.5X10.5X12.7 | 2 | ** | ||
| 13 | 0203-05040 | NUT M5 | 2 | |||
| 17 | 5070-10110 | CLAMP AB200-W | 1 | SX2 | ||
| 22 | 0012-20510 | BOLT 5X10 T | 2 | |||
| 23 | 0302-05130 | SW M5 | 2 | |||
| 24 | 0311-05080 | PW M5 | 2 | |||
| 27 | 5070-10110 | CLAMP AB200-W | 2 | SX2 |
MIKASA SANGYO CO., LTD.
————————————————————————
1-4-3,Kanda-Sarugakucho,Chiyoda-ku,Tokyo,101-0064,Japan
PRINTED IN VIETNAM
Flextool
1956 Dandenong Road, Clayton VIC 3168, Australia
Phone: 1300 353 986
flextool.com.au
ABN 80 069 961 968
This manual summarises our best knowledge of the product based on the information available at the time of publication. You should read this manual carefully and consider the information in the context of how the product will be used. Our responsibility for products sold is subject to our standard terms and conditions of sale.
DISCLAIMER:
Any advice, recommendation, information, assistance or service provided by us in this manual is given in good faith and is believed by us to be appropriate and reliable. However, any advice, recommendation, information, assistance or service provided by us is provided without liability or responsibility PROVIDED THAT the foregoing shall not exclude, limit, restrict or modify the right entitlements and remedies conferred upon any person or the liabilities imposed upon us by any condition or warranty implied by Commonwealth, State or Territory Act or ordinance void or prohibiting such exclusion limitation or modification. The product can be expected to perform as indicated in this manual so long as operation and operational procedures of the individual products are followed as recommended in this manual.
Design and technical specifications may be subject to changes.
© This publication is copyright. All rights are reserved. Flextool is a registered trade mark of Parchem Construction Supplies Pty Ltd. Mikasa is a registered trade mark of Mikasa Sangyo Co. Ltd, used under licence.
FOR MORE INFORMATION
CONTACT US ON 1300 353 986 OR VISIT flextool.com.au
EXCLUSIVE TO
Documents / Resources
 |
mikasa MVC-T90H Forward Plate Compactor [pdf] User Manual MVC-T90H, MVC-T90H VAS, MVC-T90H Forward Plate Compactor, Forward Plate Compactor, Plate Compactor, Compactor |
