matt E EVU-1-32-TP-3-32-M Three-Phase Connection Unit
Specifications
- Description: Three-phase connection unit with 1 x 32amp TPN and 3 x 32amp single-phase MCBs
- Input Volts: Nominal input voltage three-phase 400V 50Hz
- Max Load: 32 amps per load
- Cable Entry: Top and bottom
- Terminal Capacity: Supply 50.0 mm2, Load 25.0 mm2
- Dimensions (H x W x D): 550mm x 360mm x 140mm
- Weight: Approximately 10kg
- Enclosure: Mild Steel Powder Coated
- Ingress Protection: IP4X
- Warranty: 1 year from the date of purchase, limited to the replacement of faulty components only
- Ensure the input voltage matches the nominal input voltage requirement of three-phase 400V 50Hz.
- Connect the cables to the designated terminals based on the terminal capacity provided (Supply 50.0 mm2, Load 25.0 mm2).
- Securely mount the unit using appropriate fixtures in a suitable location.
- For any troubleshooting or maintenance, refer to the warranty terms and contact customer support if needed.
FAQ
- Q: What is the warranty period for the EVU-1-32-TP-3-32-M?
- A: The product is guaranteed for a period of 1 year from the date of purchase, limited to the replacement of faulty components only.
- Q: What is the Ingress Protection rating of the enclosure?
- A: The enclosure has an IP4X rating.
- Q: What is the maximum load supported by the unit?
- A: The unit supports a maximum load of 32 amps per load.
Three- phase connection unit with 1 x 32amp TPN and 3 x 32amp single-phase MCBs
INTRODUCTION
The EVU-1-32-TP-3-32-M from matt:e is a simple single dedicated connection unit with built-in O-PEN technology, which allows for the connection of EV charge points to the existing PME earthing facility.
The unit incorporates a 5 pole isolator with UV release that disconnects all poles including CPC in the event of a fault, manually resettable in line with BS: 7671, 2018 Amendment 1 2020 Regulation 722.411.4.1 (iii)
The O-PEN technology does not require earth rods or measuring electrodes to function correctly.
Product Features
- Built-in O-PEN technology
- Standard mild steel IP4X enclosure
- NO EARTH ELECTRODES REQUIRED
- Phase loss protection
- Built in 5 pole mains isolator with manually resettable UV trip
- Standard 1 Year parts warranty
- Simple wire in wire out the connection
- With MCBs
- Designed and Built in the UK
Dimensions and Specifications
- Description Dedicated EV connection centre
- Input Volts Nominal input voltage three-phase 400V 50Hz
- Max Load 32 amps per load
- Cable Entry Facility Top and bottom
- Terminal Capacity Supply 50.0 mm2
- Load 25.0 mm2
- Dimensions ( H x W x D ) 550mm x 360mm x 140mm
- Weight Approximately 10kG
- Enclosure Mild Steel Powder Coated
- Ingress Protection IP4X
- Warranty The matt:e EVU-1-32-TP3-32-M is guaranteed for a period of 1 year from the date of purchase. This warranty is limited to the replacement of faulty components only.
CONTACT
…Simplifying EV connection
t: 01543 227290 e: info@matt-e.co.uk w: www.matt-e.co.uk
Matt:e Ltd, Unit 5 Common Barn Farm Tamworth Road Lichfield WS14 9PX
Documents / Resources
 | matt E EVU-1-32-TP-3-32-M Three Phase Connection Unit [pdf] Instructions EVU-1-32-TP-3-32-M Three Phase Connection Unit, EVU-1-32-TP-3-32-M, Three Phase Connection Unit, Phase Connection Unit, Connection Unit |
