matt E ARD-1-32-TP-3-32-R EV Connection Unit
Product Usage Instructions
- Ensure power is switched off before installation.
- Connect the three-phase connection unit to the power source following electrical regulations.
- Securely mount the unit in a suitable location.
- Connect the single-phase loads to the designated terminals.
- Ensure proper cable sizing and connections to handle the load requirements.
- If a fault occurs, the auto-reset device will restore power once the fault is cleared.
- Investigate and rectify any faults before resetting the device.
FAQ
- Q: What is the warranty period for the ARD connection unit?
- A: The unit comes with a 1-year warranty from the date of purchase.
- Q: Can the ARD unit be used for EV charging?
- A: Yes, the unit is designed to simplify EV connections and can be used for EV charging purposes.
- Q: How do I contact Matt:e for support or inquiries?
- A: You can reach out to matt:e Ltd. at T: 01543 227290, E: info@matt-e.co.uk, or visit their website at www.matt-e.co.uk for more information.
Introduction
ARD-1-32-TP-3-32-R
Three-phase connection unit for 1 x 32A TPN and 3 x 32A single-phase loads, complete with Type A RCBOs
- The matt:e ARD connection centers provide a simple-to-install dedicated EV connection center, with built-in O-PEN® technology, that allows for the connection of EV charge points to the PME earthing facility without the use of earth electrodes.
- Helping to facilitate compliance with BS:7671. 2018 Amendment 1, 2020 Regulation 722.411.4.1. (iii).
- The matt:e ARD connection centers incorporate the unique 5 pole auto reset device that automatically restores power to the load once the fault has cleared
Product Features and Benefits
- Built-in O-PEN® technology
- NO EARTH ELECTRODES REQUIRED
- Helps reduce disruptive and costly groundwork
- Removes the risk of striking buried services
- Simple wire-in-wire-in-wire-out connection
- Phase loss protection
- For 1 x 32A TPN and 3x 32A single-phase loads
- Complete with Type A RCBOs
- Mild steel IP4X enclosure
- Standard 1-year parts warranty.
Specifications
| Input Volts | 400V 50Hz |
| Max Load | 63A per phase |
| Cable Entry Facility | Top and bottom |
| Terminal Capacity | 25mm2 |
| Dimensions ( H x W x D ) | 550mm x 360mm x 120mm |
| Weight | Approximately 7kG |
| Enclosure | Mild Steel Powder Coated |
| Ingress Protection | IP4X |
| Warranty | 1 Year |
CONTACT
- T: 01543 227290 | E: info@matt-e.co.uk | W: www.matt-e.co.uk
- matt:e Ltd, Unit 5 Common Barn Farm Tamworth Road Lichfield WS14 9PX
Documents / Resources
 |
matt E ARD-1-32-TP-3-32-R EV Connection Unit [pdf] Owner's Manual ARD-1-32-TP-3-32-R, ARD-1-32-TP-3-32-R EV Connection Unit, EV Connection Unit, Connection Unit, Unit |
