matt E EVU-3-32-TP-M Three Phase Connection Unit
Product Usage Instructions
Installation
- Ensure the power source is turned off before installation.
- Mount the EV connection unit securely on a suitable surface.
- Connect the cables to the designated terminals according to the specified capacity.
- Verify all connections are secure before restoring power.
Connection
- Identify the input and output terminals on the unit.
- Connect the appropriate cables to the corresponding terminals.
- Ensure proper cable management to prevent any strain on the connections.
Maintenance
- Regularly inspect the unit for any signs of wear or damage.
- Clean the unit using a dry cloth to remove any dust or debris.
- Do not attempt to repair or modify the unit yourself; contact a qualified technician if needed.
Frequently Asked Questions (FAQ)
Q: What is the warranty period for the EVU-3-32-TP-M?
A: The product is guaranteed for a period of 1 year from the date of purchase, covering the replacement of faulty components only.
Q: What is the maximum load capacity of each phase?
A: The maximum load capacity per phase is 32 amps.
Q: What is the Ingress Protection rating of the enclosure?
A: The enclosure has an IP4X rating, providing protection against solid objects larger than 1mm.
EVU-3-32-TP-M
Three-phase connection unit with 3 x 32amp TPN MCBs
- The EVU-3-32-TP-M from matt:e is simple, single, dedicated connection unit with built-in O-PEN technology, which allows for the connection of 3 x 32 amp TPN EV charge points to the existing PME earthing facility.
- The unit incorporates a 5 pole isolator with built-in UV release which disconnects all poles including CPC in the event of a fault, manually resettable in line with BS: 7671, 2018 Amendment 1 2020 Regulation 722.411.4.1 (iii)
- The O-PEN technology does not require earth rods or measuring electrodes to function correctly.
Product Features
- Built in O-PEN technology
- Standard mild steel IP4X enclosure
- NO EARTH ELECTRODES REQUIRED
- Phase loss protection
- Built in 5 pole mains isolator with manually resettable UV release
- Standard 1 Year parts warranty
- Simple wire in wire out connection
- With 3 x 32amp TPN MCBs
- Designed and Built in the UK
Dimensions and Specifications
| Description | Dedicated EV connection centre |
| Input Volts | Nominal input voltage three-phase 400V 50Hz |
| Max Load | 32 amps per load |
| Cable Entry Facility | Top and bottom |
| Terminal Capacity | Supply 50.0 mm2
Load 25.0 mm2 |
| Dimensions ( H x W x D ) | 550mm x 360mm x 140mm |
| Weight | Approximately 10kG |
| Enclosure | Mild Steel Powder Coated |
| Ingress Protection | IP4X |
| Warranty | The matt:e EVU-3-32-TP-M is guaranteed for a period of 1 year from the date of purchase. This warranty is limited to the replacement of faulty components only. |
- t: 01543 227290
- e: info@matt-e.co.uk
- w: www.matt-e.co.uk
matt:e Ltd, Unit 5 Common Barn Farm Tamworth Road Lichfield WS14 9PX
Documents / Resources
 |
matt E EVU-3-32-TP-M Three Phase Connection Unit [pdf] Instructions EVU-3-32-TP-M Three Phase Connection Unit, EVU-3-32-TP-M, Three Phase Connection Unit, Phase Connection Unit, Connection Unit |
