YITAHOME ZJHN-V3 Cat Cage

Step 1

Fully insert the panels into the plastic connectors.

Diagram Description: Shows panels labeled 'A' and 'B' being inserted into connectors labeled 'a' and 'B'. A separate detail shows a panel edge fitting into a connector.

The anti-slip mat is designed to offer slip-resistant and friction protection on the floor.

Step 2

Place the stairs (part C) on top of the iron frame (part A) and secure them with cable ties (part d).

Diagram Description: Shows wire grid panels labeled 'A', 'C', and 'E' forming a structure. Part 'F' is shown as a door. A detail indicates placing the iron frame (part F) under the platform for firmness.

Put the iron frame under the platform to ensure its firmness.

Step 3

Attach cable ties (part d) to the plastic connectors to ensure stability.

Diagram Description: Shows a close-up of a cable tie (d) being threaded through a connector and tightened.

Step 4

Continue assembly by adding panels (B) and connectors (a, B).

Diagram Description: Shows the structure expanding with more panels labeled 'B' and connectors labeled 'a' and 'B' being added.

Step 5

Continue assembly using panels (A, C, E), door (F), and securing with cable ties (d).

Diagram Description: Shows the structure taking shape with panels 'A', 'C', 'E' and door 'F' being attached. Cable ties (d) are indicated for securing.

Step 6

Add more panels (B) and connectors (a, B) to the structure.

Diagram Description: Shows the structure continuing to build with panels 'B' and connectors 'a', 'B' being added.

Step 7

Continue assembly with panels (A) and door (F).

Diagram Description: Shows the structure with panels 'A' and door 'F' being attached.

Step 8

Attach panels (A, D, G) using connectors (a) and secure with cable ties (d).

Diagram Description: Shows panels 'A', 'D', 'G' being attached using connectors 'a'. A detail shows a cable tie (d) being secured to a connector.

Step 9

Make sure to use all of the included cable ties (d) to ensure the overall stability of the cat cage.

Diagram Description: Shows the nearly completed cage and a detail of cable ties being used for reinforcement.

Step 10

Use both cable ties (part d) and white plastic clips (part e) at the panel connections to enhance stability.

Diagram Description: Shows the cage with door locks (f) being attached. A detail shows cable ties (d) and white clips (e) connecting panels. The "door lock" component is labeled.

Component: Door Lock (Türschloss, verrou, serratura, cerradura de la puerta)

Step 11

Optional: Wall mounting instructions.

Diagram Description: Shows how to attach the cage to a wall using parts g (wire panel), h (wall mount bracket), i (screw), and j (washer). The text "fixed on the wall" is displayed.

Wall Mounting Parts:

• g: Wire Grid Panel (X2)
• h: Wall Mount Bracket (X2)
• i: Screw (X2)
• j: Washer (X2)

Step 12

Installation Completed

(Messages in German, French, Italian, Spanish also present: Installation Abgeschlossen, Installation Complétée, Installazione Completata, Instalación Completada)