CAT LITTER BOX
General Assembly Instructions
- Confirm all parts are present prior to assembly.
- Assemble on a flat, clean and soft surface.
- Do not fully tighten screws until all parts are assembled.
Parts List
| Item No. | Description | Qty. |
|---|---|---|
| A | Base tray | X1 |
| B | Sifting tray | X1 |
| C | Main enclosure with front opening | X1 |
| D | Side panels (one with paw print design, one with ventilation grille) | X2 |
| E | Top cover with ventilation | X1 |
| F1 | Grated ventilation panel | X1 |
| F2 | Curved ventilation panel | X1 |
| G | Litter scoop | X1 |
Assembly Steps
Step 1
Connect the side panels (D) to the main enclosure (C). Attach the top cover (E) to the assembled sides and enclosure.
Step 2
Slide the base tray (A) into the bottom of the assembled enclosure.
Step 3
Insert the sifting tray (B) into the top. Attach the side ventilation panels (F1 and F2) to the sides of the enclosure.
Step 4
Installation Completed.
Contact Information
For any questions regarding the installation of YITAHOME products, please email after-sale.cs@hotmail.com.
Alternative contact method for Amazon.co.uk orders:
- Log into your Amazon account.
- Go to "Your Orders" and find the purchase.
- Click on "Contact Seller".
