Manuals+

Shanling M0 Pro Quick Start Guide

This guide provides essential information for operating your Shanling M0 Pro digital audio player.

Safety Instructions

  1. Do not attempt to repair, disassemble, or modify the device without authorization.
  2. Avoid using the device in extreme temperatures (hot, cold), dusty, or humid environments. Keep away from liquids.
  3. The device may become warm during charging, which is normal.
  4. Prevent the device from falling, friction, or impact against hard objects to avoid scratches, battery disconnection, data loss, or hardware damage. Avoid violent vibration or impact.
  5. Listen to music at a moderate volume to protect your hearing and the audio system. Lower the volume before plugging in headphones.
  6. Do not clean the device with chemicals or detergents, as this may damage the surface and coating.
  7. Do not disconnect the device during formatting or file transfer to prevent program errors.
  8. The USB port is for data transmission and charging only. Avoid using the device while charging.
  9. If the device is not used for extended periods, charge it regularly to maintain battery life.
  10. Replacing the battery improperly carries a risk of explosion; use only batteries of the same type or equivalent.
  11. Never expose the battery to sunlight, fire, or other extreme heat sources.
  12. When using a power adapter, ensure it is CCC certified and meets standard requirements.
  13. Please download the firmware upgrade program from the Shanling official website's download center for the M0 Pro product page and follow the upgrade instructions.
  14. Compliance Standard: Q/SLSM 001-2018

Environmental Support

Names and Contents of Hazardous Substances in Products

Component Name Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr,VI) Polybrominated Biphenyls (PBB) Polybrominated Diphenyl Ethers (PBDE)
Metal Parts ○ ○ ○ ○ ○ ○
PCBA X ○ ○ ○ ○ ○
Plastic Parts ○ ○ ○ ○ ○ ○
Battery X ○ ○ ○ ○ ○
Display Screen ○ ○ ○ ○ ○ ○
Charging Cable X ○ ○ ○ ○ ○

This table is compiled according to SJ/T 11364.

○: Indicates that the content of the toxic and hazardous substance in all homogeneous materials of this component does not exceed the limit requirements stipulated in GB/T 26572.

X: Indicates that the content of this hazardous substance in at least one homogeneous material of this component exceeds the limit requirements stipulated in GB/T 26572.

All components marked with "X" in this table comply with the EU RoHS 2.0 regulations.

Names of Parts

Top View:

  • Micro SD Card Slot
  • Type-C USB Data Port
  • 3.5mm Headphone Output / Balanced Headphone Output (requires adapter)
  • USB DAC

Side View:

  • Power/Lock Button
  • Volume Control Wheel

Front View:

  • 1.4 Inch Touch Screen (240 x 240)

Bottom View (with card access):

  • Lift the card cover by pulling on the marked edge.
  • Insert the Micro SD card in the indicated direction until it clicks. Press again to remove the card and close the cover.

Operation Instructions

Power ON / OFF / Screen Locking

  1. Power On: Press and hold the power button for 2 seconds until the screen lights up.
  2. Power Off: Press and hold the power button for 2 seconds until the screen turns off.
  3. Screen Lock: While the device is on, short press the power button to lock the screen and turn off the display. Press again to unlock.

Volume Control

Turn the volume control wheel clockwise to increase volume and counterclockwise to decrease volume.

Touch Screen Operation

Control functions by sliding, clicking, or long pressing:

  • Click: Navigate to the next menu or confirm selection.
  • Right Slide: Swipe right to return to the previous menu.
  • Long Press: In any interface, long press to return to the main menu.

Charging

It is recommended to use a DC5V/2A adapter for charging. The charging icon and battery level will be displayed on the screen when charging via USB cable.

Micro SD Card Port

  1. Supports standard Micro SD cards with a capacity up to 2TB.
  2. Open the card cover, insert the Micro SD card into the slot in the indicated direction, and press gently until it locks. Press again to remove the card.

Headphone Output Interface

The device features a 3.5mm headphone output. Standard single-ended headphones can be used directly. For balanced headphones, a separate adapter is required.

USB Port

1. Data Exchanging

  1. After booting, go to "System Settings" and select "USB Mode", then choose "USB".
  2. Connect to a computer to manage songs on the TF card.
  3. After disconnecting from the computer, go to "System Settings", select "Update My Music", and choose "Update Now" to display songs from the TF card in "My Music".

2. Digital Audio Signal Transmission

  1. After booting, go to "System Settings" and select "USB Mode", then choose "DAC".
  2. Install the USB driver on your computer before connecting the player (drivers are not needed for Mac computers).
  3. Select the appropriate audio output device on your computer.

USB Driver Download

Visit the download section on the official website www.shanling.com to download the latest USB drivers for your device.

Firmware Update

  1. Ensure the device is fully charged before updating the firmware to prevent failure.
  2. Do not operate the device during the update process.

Micro SD Card Update

  1. Download the firmware update file from the Shanling official website. Copy the latest firmware file to the root directory of the Micro SD card.
  2. Navigate to "System Settings" > "System Update" and select "Confirm" to proceed with the update.

Common Problems

  1. It is recommended to use a DC5V/2A adapter. Using an adapter with excessive voltage may damage the device.
  2. If the device fails to start, the battery may be low. Please charge it and try again.
  3. If the device is unresponsive or frozen, press and hold the power button for approximately 10 seconds to force a shutdown, then restart normally.
  4. If there is noise from the headphones, ensure the headphone jack is properly connected. Try re-inserting the plug.
  5. If there is no sound output, try using a different pair of headphones or cable and ensure the system volume is set correctly. Also, verify that the music files are not corrupted.

Attached Accessories

  • Quick Start Guide: 1
  • Warranty Card: 1
  • USB A to Type-C Cable: 1
  • Front Protective Film: 1

Contact Information

Company Name: Shenzhen Shanling Digital Technology Development Co., Ltd.

Address: No.10, Chiwan 1 Road, Shekou Nanshan District of Shenzhen City, China.

QQ Group: 667914815; 303983891; 554058348

Telephone: 400-630-6778

E-mail: info@shanling.com

Official Website: www.shanling.com

Working Hours (Monday to Friday): 08:00-12:00; 13:30-17:30

Due to continuous improvement, specifications and design are subject to change without notice.

Models: M0 Pro Ultra Portable Music Player, M0 Pro, Ultra Portable Music Player, Portable Music Player, Music Player, Player

File Info : application/pdf, 24 Pages, 1.11MB

PDF preview unavailable. Download the PDF instead.

M0Pro

References

Corel PDF Engine Version 14.0.0.653 CorelDRAW

Related Documents

Preview Shanling M0 Pro Advanced User Manual
Comprehensive guide to the Shanling M0 Pro portable music player, covering basic controls, music transfer, system navigation, playback settings, advanced functions like USB DAC/AMP and Bluetooth receiver, and system updates.
Preview Shanling EM5 Streaming Music Centre Quick Start Guide
A quick start guide for the Shanling EM5 Streaming Music Centre, covering safety instructions, part names, operating instructions, USB settings, firmware updates, and companion app information.
Preview Shanling M3X Quick Start Guide: Features, Operation, and Troubleshooting
Comprehensive guide to the Shanling M3X portable Hi-Fi music player, covering setup, operation, safety, technical specifications, and troubleshooting. Learn about its features like Qualcomm aptX HD and MQA.
Preview Shanling M3X Digital Audio Player: Quick Start Guide and Features
Comprehensive guide to the Shanling M3X Digital Audio Player, covering safety, controls, operation, firmware updates, troubleshooting, and key technologies like Qualcomm aptX HD and MQA.
Preview Shanling M1 Plus Quick Start Guide
A comprehensive guide to the Shanling M1 Plus portable audio player, covering setup, operation, features, troubleshooting, and specifications.
Preview Shanling Firmware Update: Navigating Menu and Floating Button Changes
This guide details recent firmware updates for Shanling audio devices, explaining new locations for streaming services and input switching menus, the functionality of the new 'Source' floating button, and additional floating buttons in wireless projection mode.
Preview Shanling SCD1.3 SACD/CD Player Quick Start Guide
A comprehensive guide to the Shanling SCD1.3 SACD/CD Player, covering safety instructions, parts identification, remote control operation, setup, connectivity options including SACD/CD, USB DAC, and Bluetooth, firmware updates, and app control. Learn how to use its features for optimal audio playback.
Preview Shanling M7 Quick Start Guide: Features, Operation, and Support
A comprehensive quick start guide for the Shanling M7 Digital Audio Player, covering safety instructions, device operation, navigation, charging, firmware updates, troubleshooting, and included accessories.