Taymor 3900 Series Sectional Mortise Lock: Door and Strike Preparation Details
Door Preparation Chart
| Lock Function | Exterior Turn Knob Hole (C) | Exterior Lever Hole (A) | Exterior Cylinder Hole (B) | Interior Turn Knob Hole (C) | Interior Lever Hole (A) |
|---|---|---|---|---|---|
| F01 - Passage | - | Yes | - | - | Yes |
| F04 - Entry | - | Yes | Yes | - | Yes |
| F05 - Classroom | - | Yes | Yes | Yes | Yes |
| F13 - Dormitory/Exit | - | Yes | Yes | Yes | Yes |
| F07 - Storeroom | - | - | Yes | - | Yes |
| F19 - Privacy | Yes | - | - | Yes | Yes |
| F20 - Corridor | - | Yes | - | - | Yes |
| F13 - Storeroom with Deadbolt | - | - | Yes | Yes | Yes |
| Single Dummy | - | - | - | - | - |
| Double Dummy | - | - | - | - | - |
Door Preparation Details - Metal Doors
This section details the preparation required for metal doors. The diagrams illustrate the placement and dimensions for mortise locks.
Key Dimensions:
- Backset: 70 mm (2-3/4")
- Lock Body Mortise: Height 203 mm (8"), Width 23 mm (15/16"), Depth 38 mm (1-1/2")
- Lever Hole (A): 25 mm (1") diameter
- Cylinder Hole (B): 32 mm (1-1/4") diameter
- Turn Knob Hole (C): 13 mm (1/2") diameter
- Thru Hole: 10 mm (3/8") diameter
Notes:
- Templates are not to scale.
- 3900 series mortise locks meet all requirements for door and frame installations prepared to ANSI A156.13.
- Refer to strike prep template for additional details.
Door Preparation Details - Wood or Composite Doors
This section details the preparation required for wood or composite doors. The diagrams are similar to those for metal doors, indicating the placement and dimensions for mortise locks.
Key Dimensions:
- Backset: 70 mm (2-3/4")
- Lock Body Mortise: Height 203 mm (8"), Width 23 mm (15/16"), Depth 38 mm (1-1/2")
- Lever Hole (A): 25 mm (1") diameter
- Cylinder Hole (B): 32 mm (1-1/4") diameter
- Turn Knob Hole (C): 13 mm (1/2") diameter
- Thru Hole: 10 mm (3/8") diameter
Notes:
- Templates are not to scale.
- 3900 series mortise locks meet all requirements for door and frame installations prepared to ANSI A156.13.
- Refer to strike prep template for additional details.
Strike Preparation Details - Metal Doors
This section outlines the preparation required on the door frame for the strike plate on metal doors.
Key Dimensions for Strike Mortise:
- Height: 162 mm (6-3/8")
- Width: 32 mm (1-1/4")
- Depth: 25 mm (1")
Strike Preparation Details - Wood Doors
This section outlines the preparation required on the door frame for the strike plate on wood doors.
Key Dimensions for Strike Mortise:
- Height: 162 mm (6-3/8")
- Width: 32 mm (1-1/4")
- Depth: 25 mm (1")
- Specific Cut-out: 28 mm (1-1/8") deep cut-out
Reinforcement: Suitable reinforcement is required.
