FSP2000-20HM 2000W CRPS Module Technical Datasheet
Product Overview
The FSP2000-20HM is a redundant power supply module based on the CRPS standard. It offers a total power capacity of up to 2000 Watts and includes PMBus features for communication with motherboards. This power supply is an ideal choice for datacenter, workstation, communication, and other automation applications. It complies with the latest safety and EMC standards to meet various worldwide regulations.
Features
- Certified CB 62368-1 & CB 60950-1
- Meets 80 Plus Titanium efficiency standards
- Meets CRPS Standard
- Meets PMBus 1.2
- Designed for operation up to 5,000 meters above sea level
- High Reliability
- Low Ripple & Noise
- Over Current Protection
- Over Temperature Protection
- Over Voltage Protection
Safety Standard Approvals
The product is certified by:
- CB certification (CB 62368-1 & CB 60950-1)
- TÜV Rheinland certification (Bauart geprüft Sicherheit, Regelmäßige Produktionsüberwachung)
- 80 Plus Titanium
- CE Mark
- FCC Mark
- CCC Mark
General Specifications
| Specification | Value |
|---|---|
| Dimension (L x W x H) | 185 x 73.5 x 39 mm (7.28 x 2.89 x 1.53 inches) |
| Efficiency | 80 Plus Titanium |
| Hold-up time | 70% of Max. load at +12V >10ms |
| Operating altitude | 5,000 meters above sea level |
| Environment - Working temperature | 0°C to 55°C |
| Environment - Storage temperature | -20°C to +80°C |
| Environment - Working humidity | 5% to 90% RH non-condensing |
| Environment - Storage humidity | 5% to 95% RH non-condensing |
| MTBF (SR-332 Issue 2) | 100,000 hours of continuous operation at 25°C, 100% output load |
| Applications | Storage System, Workstation, Industry Controller |
Input Specifications
| Specification | Value |
|---|---|
| Input voltage | 90-264Vac |
| Input frequency | 47-63Hz |
| Input current | 100Vac@12A, 200Vac@10A |
Output Rating
| Outputs | Input Voltage | Min. Current | Max. Current | CLST Peak 20 Sec. duration | CLST Peak 10m Sec. duration | Pmax Peak 100μ Sec. duration |
|---|---|---|---|---|---|---|
| +12V | 90~140V | 0.5A | 81.8A | Rated +6.0A | Rated +30.0A | Rated +45.0A |
| +12V | 180~200V | 0.5A | 130.3A | Rated +6.0A | Rated +30.0A | Rated +45.0A |
| +12V | 200~220V | 0.5A | 147A | Rated +6.0A | Rated +30.0A | Rated +45.0A |
| +12V | 220~264V | 0.5A | 163.6A | Rated +6.0A | Rated +30.0A | Rated +45.0A |
| +12Vsb | 90~264V | 0.0A | 3.0A | >4.0A | NA | NA |
Mechanical Specifications
The FSP2000-20HM is a compact power supply module designed for integration into systems. The following dimensions and details are provided:
Overall Views: Two perspectives of the FSP2000-20HM power supply module are presented, showcasing its form factor and component layout.
Dimensions (Unit: mm):
- Length (L): 185 ± 0.5 mm
- Width (W): 73.5 ± 0.5 mm
- Height (H): 39.0 ± 0.3 mm
Side View Details: A side profile illustrates the module's length, height, and width. It indicates the airflow direction with an arrow pointing towards the front of the unit. Key dimensions are marked, including the overall length of 188.4 ± 0.3 mm, height of 39.0 ± 0.3 mm, and width of 73.5 ± 0.5 mm. Other noted dimensions include 40.0 ± 0.5 mm, 8.5 ± 0.2 mm, 3.5 ± 0.5 mm, 65.7 ± 0.2 mm, 185.0 ± 0.5 mm, and 11.0 ± 0.3 mm, likely referring to specific mounting points or connector housing dimensions.
End View Details: An end view highlights the fan assembly and the main connector block, typically where power input and output connections are made.
