FSP1200-20FH 1200W CRPS Module Datasheet
Brand: FSP
Product Overview
The FSP1200-20FH is a redundant power supply module based on the CRPS 2.0 standard. It provides a total power capacity of up to 1200 Watts and includes PMBus features for communication with the motherboard. This power supply is an ideal choice for new generation datacenter applications and complies with the latest safety and EMC standards, meeting various worldwide regulations.
Features
- Certified CB 62368-1 & CB 60950-1
- HVDC Input
- Meets 80 Plus Platinum efficiency
- Meets CRPS 2.0 standards
- Meets PMBus 1.2 standards
- Designed for operation at 5,000 meters above sea level
- High Reliability
- Low Ripple & Noise
- Over Current Protection
- Over Temperature Protection
- Over Voltage Protection
General Specifications
| Specification | Details |
|---|---|
| Dimension (L x W x H) | 185 x 73.5 x 39 mm (7.28 x 2.89 x 1.53 inch) |
| Efficiency | 80 Plus Platinum |
| Hold-up time at 100% Loading | 12V = 11ms, 12Vsb = 70ms |
| Operating altitude | 5,000 meters above sea level |
| Environment: Working temperature | 0°C to 55°C |
| Environment: Storage temperature | -20°C to +80°C |
| Environment: Working humidity | 5% to 90% RH non-condensing |
| Environment: Storage humidity | 5% to 95% RH non-condensing |
| MTBF (SR-332 Issue 2) | 250,000 hours of continuous operation at 45°C, 75% output load |
| Applications | Storage System, Workstation, Industry Controller |
Input Specifications
| Specification | Details |
|---|---|
| HVDC input: Min. Voltage | 180Vdc |
| HVDC input: Rated Voltage | 336Vdc |
| HVDC input: Max. Voltage | 400Vdc |
| HVDC input: Start up Voltage | 175V ±4Vdc |
| HVDC input: Power off Voltage | 165Vdc ±5Vdc |
| Accept AC input | 90-264Vac, 47-63Hz |
Output Rating
| Outputs | Input Voltage | Min. Current | Max. Current | Peak Current Duration | ||
|---|---|---|---|---|---|---|
| CLST Peak 20 Sec. | CLST Peak 10m Sec. | Pmax Peak 100μ Sec. | ||||
| +12V | 100~127V | 0.0A | 80.5A | Rated +6.0A | Rated +30.0A | Rated +45.0A |
| +12V | 200~240V | 0.0A | 97.0A | Rated +6.0A | Rated +30.0A | Rated +45.0A |
| +12Vsb | 100~240V | 0.0A | 3.0A | >4.0A | NA | NA |
Note: For 100Vac to 127Vac input, the rating current is 80.5A. For 200Vac to 240Vac input, the rating current is 97.0A.
Safety Standard Approvals
The product is certified with safety standards including CB 62368-1, CB 60950-1, CULUS LISTED I.T.E. POWER SUPPLY, TÜVRheinland CERTIFIED, CE, and FCC.
Visual Description
Page 1 Image Description: A high-resolution image of the FSP1200-20FH power supply module. The module is rectangular, featuring a fan grille on the left side with a visible fan, and various connectors on the right side. A prominent label displays "FSP1200-20FH" and "94%". A sticker reads "TO KEEP WARRANTY PLS DO NOT REMOVE". Below the product image are safety standard approval logos: CULUS LISTED I.T.E. POWER SUPPLY E190414, TÜVRheinland CERTIFIED, CE, and FCC logos.
Page 2 Mechanical Specifications Diagram Description: The page displays two perspective views of the FSP1200-20FH power supply module, illustrating its form factor and external features. Below these views is a technical drawing detailing the mechanical dimensions of the module in millimeters (mm). The main body dimensions are approximately 185 mm (length) x 73.5 mm (width) x 39 mm (height). Specific connector areas and the fan housing are also dimensioned. An arrow indicates the "AIR FLOW" direction.
