FSP550-50FS 550W CRPS 2U Redundant Power Supply
Technical Datasheet
Features
- Certified CB 62368-1 & CB 60950-1
- Meet 80 Plus Platinum
- Meet CRPS Standard
- Meet PMBus 1.2
- Design for 5,000 Meter above sea level
- High Reliability
- Low Ripple & Noise
- Over Current Protection
- Over Temperature Protection
- Over Voltage Protection
Safety Standard Approval
UL, TÜV Rheinland, CE, FCC, CCC
Description
The FSP550-50FS is a 2U redundant power supply based on the CRPS standard. It offers a total power capacity of up to 550 Watts and provides PMBus features for communication with the motherboard. This power supply is an ideal choice for datacenter, workstation, communication, and other automation applications. The product complies with the latest safety and EMC standards, meeting various global regulations.
General Specifications
| Dimension (L x W x H) | 250 x 76 x 83.8 mm (9.84 x 3 x 3.3 inches) |
|---|---|
| Efficiency | 80 Plus Platinum (Module) |
| Hold-up time at 100% Loading | 12V = 11ms, 12Vsb = 70ms |
| Operating altitude | 5,000 meters above sea level |
| Environment | Working temperature: 0°C to 55°C Storage temperature: -20°C to + 80°C Working humidity: 5% to 90% RH non-condensing Storage humidity: 5% to 95% RH non-condensing |
| MTBF (SR-332 Issue 2) | 500,000 hours of continuous operation at 55°C, 100% output load |
| Applications | Storage System, Workstation, Industry Controller |
Input Specifications
Input voltage: 90-264Vac
Input frequency: 47-63Hz
Input current: 115Vac @ 8A, 230Vac @ 4A
Output Rating
| Outputs | Input Voltage | Min. Current | Max. Current | Total Output Power |
|---|---|---|---|---|
| +12V | 100~240V | 0.5A | 44A | 528W |
| +3.3V | 100~240V | 0.0A | 20A | 140W |
| +5V | 100~240V | 0.0A | 20A | 550W |
| -12V | 100~240V | 0.0A | 0.3 | 3.6W |
| +5Vsb | 100~240V | 0.0A | 4A | 20W |
Mechanical Specifications
Unit: mm
The power supply unit has a 2U form factor with dimensions of 250.0±0.5 mm in length, 76.0±0.5 mm in width, and 83.8 mm in height. The design indicates airflow from the front (left) to the rear (right). Mounting details include two M3 screws with a spacing of 56.0±0.5 mm, and a required edge clearance of 10.0±0.1 mm.
