Tuya SM200 Mini Smart Zigbee Smoke Detector
User Manual for Smart Home Protection
Product Overview
This document provides instructions for the Tuya SM200 Mini Smart Zigbee Smoke Detector, designed for intelligent home safety. The device is compact and cylindrical, with a diameter of approximately 75mm.
Package Contents
- Smoke Detector Unit
- Mounting Bracket
- Screws (?)
- Wall Plugs (?)
Installation Guide
Follow these steps to install your smoke detector:
Mounting the Bracket
Attach the mounting bracket to the ceiling or wall using the provided screws and wall plugs. Ensure it is securely fastened.
[Diagram: Mounting bracket being screwed into a ceiling or wall.]
Attaching the Detector
Align the smoke detector unit with the mounting bracket and twist it clockwise until it locks into place.
[Diagram: Smoke detector unit being attached to the mounted bracket by twisting.]
Battery Installation
Open the battery compartment on the smoke detector, insert the required batteries (typically 2x AA, not explicitly shown), and close the compartment securely.
[Diagram: Battery compartment being opened and batteries being inserted into the smoke detector.]
Operation and Features
Test Button (▶️ Test)
Press the test button to verify the alarm is functioning correctly. A loud alarm sound should be heard.
Silence Button (? Silence)
If the alarm is triggered, pressing the silence button will temporarily mute the siren. The detector will continue to monitor for smoke.
LED Indicator (? Status)
The LED light indicates the detector's status: typically blinking green for normal operation, solid red during an alarm, and other patterns for pairing or errors.
Specifications
- Power Source: Battery-powered (e.g., 2x AA batteries)
- Connectivity: Zigbee
- Alarm Volume: Approximately 85 dB at 3 meters
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Operating Humidity: 10% to 90% RH (non-condensing)
Troubleshooting
False Alarms: Ensure the detector is not placed near cooking fumes, steam, or dust. Clean the sensor if necessary.
No Connection: Verify that the Zigbee hub is powered on and within range. Check battery levels.
Alarm Not Sounding: Ensure batteries are correctly installed and charged. Test the unit using the test button.
Safety Precautions
- Install smoke detectors on every level of the home and in each sleeping area.
- Test smoke detectors monthly.
- Replace batteries at least once a year, or when the low battery warning sounds.
- Do not paint over or obstruct the smoke detector.
