Smart Gas&CO Alarm Instruction for use (zigbee)
If you purchased the zigbee protocol, please read this manual.
Please power up the device for 1 minute before connecting to ZigBee network!
Zigbee Gas & CO Alarm Box is a 2-in-1 smart device that detects the gas & carbon monoxide concentration in the kitchen in real time. The gas concentration value can be viewed in real time through the Tuya APP. If the concentration exceeds the standard, an 80-decibel high-pitched alarm will be triggered.
1. Packing list:
- Gas&CO Alarm Box X1
- Instruction for use X1
- USB power supply cord X1
Product parameter table
| Parameter | The minimum value | The maximum | unit |
| Working temperature | -20 | 85 | °C |
| Working voltage | 5 | V | |
| Working current | 10 | 496 | mA |
| size | 100*100*35 mm | ||
| The power supply mode | USB 5V/1A | ||
| Communication protocol | ZigBee | ||
| Color | White | ||
| Shell material | ABS | ||
| The weight of the | 100g | ||
| CO(carbon monoxide) range | 0 | 500 | ppm |
| Measuring range | 0 | 20 | LEL% |
| Concentration values over LEL% will trigger an 80 decibel alarm sound | |||
| 4-8 LEL% | Slight headache and fatigue(For reference only) | ||
| 8-15 LEL% | Headache and nausea (For reference only) | ||
| 15-20 LEL% | Dizziness, spasm, life threatening(For reference only) | ||
2. Install the APP
Scan the Smart life APP download the code below, Installed and registered users. Log in the APP.
[QR code for Smart Life app download]
3. Add equipment-1
Ensure that the ZigBee gateway is connected to the WiFi signal and connected to the internet.
Use a 5V/1A power plug and USB cable to power on the device for 1 minute to heat the sensor.
Keep the device powered on, press the reset button again for 5 seconds, and then release.
The indicator light of the box will quickly flash, entering a state of waiting for the delivery network.
Open the smart life application and click on the "+" in the upper right corner,
Find the sensor category and select ZigBee sensor, select the gateway to configure,
Ensure that the indicator lights of the gas and carbon monoxide alarm boxes flash quickly, and then click 'Next' to enter the distribution network process.
[Image: Device indicator light flashing quickly]
4. Add equipment-2
Ensure that mobile phones have WIFI connection. After the WIFI password input,
Click on the confirmation. APP to jump is connecting interface, Distribution network progress indication, When reached 100%, Equipment will complete distribution network and add into the interface, Select add device to the room, Modify the device name and then click the "complete", APP will enter a device interface.
[Image: Connecting interface and device added to room]
5. Set up automatic-1
Gas&CO Alarm Box linkage by Tuya APP automation function of other equipment in the room
(Such as air conditioning, new fan, air purifier, humidifier, etc)
After reaching a predetermined threshold, automatic control.
Click on the "smart" button at the bottom of the APP home page,
Intelligent scene into the interface, Click on the button at the top of the automation,
Then click "+", smart setting into the interface.
[Image: Tuya app smart automation setup]
6. Set up automatic-2
Click on the + enter to create smart automation configuration, Set conditions,
In the "device status changes" option select intelligent
Gas&CO Alarm Box, Choose the trigger condition of air environment parameters,
Gas value | Gas state | CO value | CO state 4 one of them.
[Image: Setting automation conditions]
7. Set up automatic-3
Select a parameter thresholds. There are less than,
equal to, greater than 3 kinds of condition model,
Set one of the select the next step.
[Image: Setting parameter thresholds]
8. Set up automatic-4
Create a set task, Select operating equipment, Choose to control device in
the device list, Such as lamps, curtains, air conditioning, the new fan,
humidifier, air purifier, etc.In the device's function interface to select
specific commands tocontrol, Such as open, close, time or other.
Then select the next step.
[Image: Selecting equipment and commands for automation]
9. Set up automatic-5
Edit automation name, Choose automation effective effect of the time,
Click save - enabled immediately, Automation set success.
[Image: Saving and enabling automation]
9. Set up automatic-6
When the Gas&CO Alarm Box detect environmental parameters to
default values will be automatically control equipment,
Gas&CO Alarm Box can set up multiple intelligent automation
control equipment at the same time.
Note: After the device is turned on, the sensor needs to be warmed up for 1 minute, and
then the test is performed after the warm-up is completed.
[Image: Automation in action and warm-up note]
