LEQISMART Electric Scooter A8 User Manual

More Information Visit www.leqismart.com

Function

Handlebar: Steering control.

Brake Lever: Controls braking.

Front Tube: Connects handlebar to the main body.

Folding Handle: Used for folding the scooter.

Accelerator: Controls speed.

Folding Hook: Secures the folded scooter.

Hook Fixing Buckle: Receives the folding hook.

Motor Unit: Located in the rear wheel, powers the scooter.

Atmosphere Light: Decorative lighting.

Charging Port: Where the charger connects.

Display and Controls

Function mode: Cruise mode, pedestrian mode, fault prompt, light, Bluetooth, Lock.

Gear mode: Maximum speed limits are 6 km/h for L gears, 15 km/h for M gears, and 25 km/h for H gears.

Speedometer: Displays the current speed and the remaining mileage within 6 seconds after power-on.

Battery indicator: Displays the remaining battery power. It shows red and flashes when the power is about 10%.

Switch button: Press to turn on. Press and hold for 3 seconds to shut down. In power-on state, press once to turn the light on/off. Press twice consecutively to switch gears.

Packing List

Parameters

ParameterValue
ModelA8
Net weight15.5 KG
Expanded size112.4×44×118 CM
Applicable age10+
Applicable height130~200 CM
Maximum load100 KG
Maximum speed25 KM/H
MileageAbout 40 KM
GradeabilityAbout 15%
Protection gradeIPX5
Charging timeAbout 5.5 H
BMS managementOver-charge, Over-temperature, Over-discharge, Over-current, Short circuit, Over-voltage
Brake systemManual disc brake + Electronic brake
Connection methodBluetooth
Tire size9 inch puncture-proof tubeless tyres

Assembly

  1. Pull the folding handle upwards until a click sound is heard. Pull the folding handle to confirm it is locked.
  2. Manually connect the fixing seat and the data cable in the front tube. Check if it is turned on normally.
  3. Insert the fixing seat into the front tube and use the T-shape Allen Key to tighten the six screws.

Charge Your Scooter

The charger's indicator light turns green when connected to the power supply. Inserting the charging plug will turn the indicator light from green to red. After charging, the indicator light turns from red to green.

Charging Process

Attention

How To Ride

  1. Press the switch button to turn on the scooter and check the battery level. If the battery level is too low, please charge it in time.
  2. Stand with your right foot on the pedal and thrust against the ground with your left foot. When the speed of the scooter is ≥ 4 km/h, start the motor.
  3. During the sliding, keep your balance, place the other foot on the pedal, and lightly press the accelerator to move forward.
  4. When steering or decelerating, release the accelerator and use the brake lever to brake.

Folding

Turn off the scooter, press the red safety lock, and release the folding handle. Fold the front tube clamp, align the folding hook with the hook fixing buckle, and put it in. Lift the front tube to confirm it is fastened firmly.

Unfolding

Remove the folding hook from the hook retaining buckle. Straighten the front tube. Close the folding handle until there is a "click" sound. Flip the folding handle to confirm whether it is locked.

LEQISMART APP

Scan a QR code with your mobile phone, or search "LEQISMART" in the Application market, download, and install the APP. If the LEQISMART APP is already installed, ensure it is the latest version.

Connection Steps

  1. STEP 1: Press the power button to turn on the scooter and turn on the Bluetooth function of the mobile phone.
  2. STEP 2: Open the LEQISMART APP. For the first use, please register/log in to your account according to the APP guide.
  3. STEP 3: Enter the APP homepage, select "Search the binding". The APP will scan the scooter to be configured and add the device according to the prompts in the APP interface.

Safety Precautions

Cleaning And Storage

If there are stains on the surface of the scooter, use a soft cloth dipped in a small amount of water to wipe. If there are stains that are difficult to clean, smear them with toothpaste and brush them repeatedly, then clean them with a damp cloth. If the plastic parts of the body are scratched, use sandpaper or other abrasive materials to polish them.

Attention

Do not use alcohol, gasoline, kerosene, or other corrosive and volatile chemical solvents to clean, otherwise it will seriously damage the appearance and internal structure of the scooter.

It is forbidden to use a pressure water gun to spray and wash. Ensure that the scooter is off and the charging port rubber cover is tightly fastened during cleaning, otherwise electric shock or serious failure may occur due to internal water inflow. When not in use, store in a dry and cool place indoors. Avoid outdoor storage for a long time. Long-term sun exposure, overheating, and cold outdoor environments will accelerate the appearance and tire aging of the scooter, and reduce the service life of the scooter and battery pack.

Tire Inflation Maintenance

The product uses puncture-proof tubeless tires. Please check carefully the tire pressure before riding, and ensure the tire pressure is 45-50 psi. When the tire height sinks 20%-30%, it needs to be inflated. The recommended tire pressure is 45-50 psi after inflation, and the tire should be inflated at least once every 2-3 months. Regular inflation and cleaning of tire surface debris can prolong the service life of the tire.

Battery Maintenance

Environmental Protection

This product contains battery or recyclable electronic waste, and the built-in rechargeable battery contains substances that may pollute the environment. When disposing of the product, please do not pile it with general household waste, but hand it to the electronic waste collection point designated by the state, which is beneficial to environmental protection.

After-sales Service

  1. Within 7 days from the day after you sign, the second sale of the product will not be affected. After testing by the after-sales service center, you can enjoy free return or replacement services.
  2. Within 8-15 days from the next day after you sign for the product, if there is a product performance failure, through the after-sales service center detection and determination, you can enjoy free replacement or maintenance services.
  3. Within 12 months from the day after you sign the receipt, in case of product performance failure, through the after-sales service center detection and determination, you can enjoy free maintenance services.

Attention: You are advised to keep the packing case for at least 15 days from the next day after you sign for it.

Non-warranty Rule

Warranty Content

TypePartsTimes
Main partsFrame body, motor components, controllers, handles, meters, handle mounts, front tubes, brake discs, disc brake components, front fork components12 Months
AttachmentBattery body, charger, throttle dial, brake lever, folding hook, front wheel, Brake cable, connecting cable, foot support group6 Months
Wearing partsCover, front and rear lights, front and rear fenders, silicone pad, atmosphere lamp, rubber plug, instrument cover, reflective strip, frame bottom cover, charging seat, hook fixing seat3 Months

Manufacturer Information

ShenZhen LEQI Intelligent Technology Co., Ltd.

Add: Factory Room 202, No. 340 Guihua Road, Guixiang Community, Guanlan Sub-district, Longhua District, Shenzhen, Guangdong, China

Email: service@leqismart.com

Web: www.leqismart.com

Models: WY-R13 786016222079, WY-R12 786016222062, A8, A8 Electric Scooter, Electric Scooter, Scooter

File Info : application/pdf, 16 Pages, 1.83MB

PDF preview unavailable. Download the PDF instead.

28b03a8b-2bd8-4884-b01b-021142ff8b57

References

Adobe PDF Library 15.0 Adobe InDesign 16.0 (Windows)

Related Documents

Preview LEQISMART A8 Electric Scooter User Manual - Operation and Safety Guide
This user manual provides essential information for operating and maintaining the LEQISMART A8 electric scooter. It covers product features, assembly, riding instructions, safety precautions, charging, app usage, warranty details, and troubleshooting fault codes.
Preview LEQISMART ELECTRIC SCOOTER A8 User Manual
Comprehensive user manual for the LEQISMART ELECTRIC SCOOTER A8, covering features, specifications, assembly, charging, operation, safety precautions, maintenance, and app connectivity.
Preview LEQISMART D12 Electric Scooter User Manual | Features, Assembly, Safety, and App Guide
Comprehensive user manual for the LEQISMART D12 electric scooter. Covers product features, assembly, charging, safe riding practices, app connectivity (AI Life), maintenance, safety guidelines, and battery information.
Preview LEQISMART A6 Pro Electric Scooter User Manual
User manual for the LEQISMART A6 Pro electric scooter, detailing package contents, functions, controls, and operational modes.
Preview LEQISMART S11 Electric Scooter User Manual
This user manual provides comprehensive instructions for the LEQISMART S11 electric scooter, covering assembly, operation, safety precautions, maintenance, battery information, specifications, and warranty details.
Preview LEQISMART A6S/A6S Pro Electric Scooter User Manual
Comprehensive user manual for the LEQISMART A6S and A6S Pro electric scooters, covering setup, operation, safety, maintenance, and warranty information.
Preview LEQISMART Electric Scooter A6L/A6L Pro User Manual
Comprehensive user manual for the LEQISMART A6L and A6L Pro electric scooters, covering package contents, functions, parameters, assembly, charging, riding instructions, folding, app usage, safety precautions, and warranty information.