LEQISMART Electric Scooter A6S/A6S Pro User Manual

Package Contents

The package includes the following items:

• User Manual
• Power Adapter
• T-shape Allen Key
• Screws

Function

The electric scooter features several components and functions:

• Handlebar: Controls steering and houses the accelerator and switch button.
• Brake Lever: Used for braking.
• Front Tube: Connects the handlebar assembly to the main body.
• Folding Handle: Allows the scooter to be folded for portability.
• Accelerator: Controls the speed.
• Switch Button: Powers the scooter on/off and controls lights and gear modes.
• Fixed Button: Likely refers to the switch button's function.
• Motor: Provides propulsion.
• Charging Port: For recharging the battery.
• Atmosphere Light: Ambient lighting feature.

The display shows:

• Function mode: Options include Cruise mode, Pedestrian mode, Fault prompt, Light, Bluetooth, and Lock.
• Speedometer: Displays current speed and remaining mileage (for 6 seconds after power-on).
• Gear mode: L (6 km/h), M (15 km/h), H (25 km/h).
• Battery level: Indicates remaining battery power, turning red and flashing when around 10%.

Switch Button Operations:

• Power On/Off: Press to turn on; press and hold for 3 seconds to shut down.
• Light Control: In power-on state, press once to toggle the light.
• Gear Change: In power-on state, press twice consecutively to switch gears.

Parameters

Assembly

Follow these steps to assemble the scooter:

1. Pull the folding handle upwards until a click is heard, then pull the handle to confirm it is locked.
2. Manually connect the fixing seat and the data cable in the front tube, and check if it powers on normally.
3. Insert the fixing seat into the front tube, and use the T-shape Allen Key to tighten the six screws.

Charge Your Scooter

Charging the scooter is straightforward:

1. The charger indicator light turns green when connected to the power supply.
2. When the charging plug is inserted, the indicator light turns from green to red.
3. After charging is complete, the indicator light turns from red to green.

Charging Steps Illustration:

• Open the rubber flap covering the charging port.
• Plug the power adapter into the charging port.
• Fasten the rubber flap after charging is complete.

Attention:

• Only use the original power adapter for charging.
• Keep children and flammable materials away during charging.
• Do not charge or use the battery if it emits unusual smells, overheats, or leaks.
• Do not open the battery pack or insert anything into the charging port, as it contains dangerous substances.
• If the scooter is not used for over 30 days, fully charge it, store it in a cool, dry place, and recharge it every 3 months.

How to Ride

Follow these steps to ride the electric scooter:

1. Press the switch button to turn on the scooter and check the battery level. If low, charge it promptly.
2. Stand with your right foot on the pedal and push off the ground with your left foot. Once the scooter reaches 4 km/h, press the accelerator to start the motor and continue accelerating.
3. While gliding, maintain balance, place your other foot on the pedal, and lightly press the accelerator to move forward.
4. When steering or decelerating, release the accelerator and use the brake lever to brake.

Folding and Unfolding

Folding the Scooter:

1. Flip the fold switch up and engage the fold wrench.
2. Fold and lower the front tube, then place the folding hook into the hook holder.

Unfolding the Scooter:

1. Remove the folding hook from its securing loop.
2. Straighten the front tube.
3. Close the folding handle until a "click" is heard.
4. Flip the folding handle and check that it is securely locked.

LEQISMART APP

Enhance your riding experience with the LEQISMART app:

• Scan the QR code or search for "LEQISMART" in your mobile app market to download and install the app. If already installed, update to the latest version.

App Usage Steps:

1. STEP 1: Press the switch button to turn on the scooter and activate your mobile phone's Bluetooth.
2. STEP 2: Open the LEQISMART APP. For first-time use, register or log in to your account following the app's guide.
3. STEP 3: On the app homepage, select "Search for binding". The app will scan for the scooter, configure it as "LEQISMART", and add the device as prompted.

Safety Precautions

Please read and adhere to the following safety guidelines for a safe riding experience:

• Always wear appropriate safety and protective gear.
• Wear shoes and comfortable clothing.
• Do not use unapproved accessories or modifications, as this voids the warranty and may cause injury or death.
• Keep plastic packaging away from children to prevent suffocation.
• Do not operate the scooter under the influence of drugs or alcohol.
• Do not operate if restless or sleepy.
• Use good judgment to avoid dangerous situations.
• The A6S scooters have a range of approximately 25 km and a maximum speed of 25 km/h. The A6S Pro scooters have a range of approximately 30 km and a maximum speed of 25 km/h.
• Avoid sharp turns at high speeds.
• Do not abuse the scooter; doing so can cause damage and injury.
• Avoid riding in or near water puddles, mud, sand, stones, gravel, debris, or rough terrain.
• The scooter is designed for paved, flat, and even roads. Lift the scooter over uneven pavement.
• Do not ride in inclement weather (snow, rain, hail, ice) or extreme heat.
• Do not ride near pools or large bodies of water.
• Be aware of city traffic obstacles like curbs and steps. Avoid jumping obstacles. Anticipate and adapt speed to pedestrians. Step off the scooter for dangerous obstacles.
• Do not ride over bumps or objects greater than 1.5 cm, even with bent knees.
• Always pay attention to your surroundings: road conditions, people, property, and objects.
• Do not operate in crowded areas.
• Exercise extreme caution when riding indoors, especially near people, property, and in narrow spaces.
• Take special precautions when riding at night; do not touch the brake disc.
• Do not operate while talking, texting, or using your phone.
• Do not ride where prohibited.
• Do not ride near motor vehicles or on public roads.
• Do not climb or descend steep hills.
• The scooter is for single-person use only.
• Any load attached to the handlebar can affect stability; do not carry items while riding.
• Individuals with balance issues should not operate the scooter.
• Pregnant women or those planning pregnancy should not operate the scooter.
• Children and the elderly should only use the scooter with proper instruction and supervision.
• At higher speeds, account for longer stopping distances.
• Do not step forward off the scooter while it is moving.
• Do not attempt to jump on or off the scooter.
• Do not perform stunts or tricks.
• Do not ride in dark or poorly lit areas.
• Avoid potholes, cracks, or uneven pavement.
• Do not operate off-road.
• Do not exceed the maximum weight limit of 100 kg.
• Avoid unsafe areas with flammable gas, steam, liquid, dust, or fiber, which could cause fire or explosions.
• Recommended user age: 10+ years; height: 130-200 cm.
• Anticipate trajectory and speed, respecting traffic and pedestrian rules.
• Signal your presence when approaching pedestrians or cyclists if you are not seen or heard.
• Cross protected passages on foot.
• Always prioritize your safety and the safety of others.
• Do not misuse the vehicle.
• This vehicle is not intended for acrobatic use.
• Caution: The brake may become hot during use; do not touch after use.
• Periodically inspect the frame, fork, and suspension attachments for damage related to intensive use.
• Regularly check the tightening of bolts, wheel axles, folding system, steering system, and brake shaft.
• Do not modify or transform the vehicle, including steering tube, stem, folding mechanism, or rear brake.
• Recommended tire pressure for pneumatic tires: 45-50 psi.
• WARNING: Mechanical components are subject to stress and wear. If a component's expected service life is exceeded, it may break suddenly, causing injury. Look for cracks, scratches, or discoloration in high-stress areas, indicating the component needs replacement.
• Refer to the maintenance list for user-performed tasks: routine inspection, maintenance, cleaning.
• Follow instructions for all vehicle functions, including the assisted start mode (pushing the vehicle over 4 km/h).
• Do not expose the scooter to temperatures above 50°C or below -20°C. Do not place it in a fire, as this can cause battery failure, overheating, or fire.
• Environmental conditions for charging (indoor/outdoor) require powering off the vehicle or putting it in a non-operational mode.
• If not in use for over 30 days, fully charge, store in a cool, dry place, and recharge every 3 months.
• The device contains a radio transmitter module (CMIIT ID:2020DP3421). Do not use wireless devices where prohibited, as they may interfere with other electronics or cause risks.
• Take time to learn the basics and practice to avoid accidents.
• Keep these printed instructions for future reference and read them carefully before use.

Cleaning and Storage

To clean the scooter:

• For surface stains, use a soft cloth dampened with water.
• For stubborn stains, apply toothpaste, brush repeatedly, then clean with a damp cloth.
• For scratched plastic parts, use sandpaper or other abrasive materials to polish them.

Attention:

• Do not use alcohol, gasoline, kerosene, or other corrosive solvents, as they can damage the scooter's appearance and internal structure.
• Do not use a high-pressure water gun for cleaning.
• Ensure the scooter is off and the charging port rubber cover is securely fastened during cleaning to prevent electric shock or serious failure due to water ingress.
• Store the scooter indoors in a dry and cool place when not in use. Avoid long-term outdoor storage.
• Prolonged sun exposure, overheating, and cold outdoor environments accelerate the aging of the scooter and tires, reducing their service life.

Tire Inflation Maintenance

This scooter uses vacuum tires. If the tire height decreases by 20%-30%, it needs inflation. The recommended tire pressure is 45-50 psi after inflation. Inflate the tire at least once every 2-3 months. Regular inflation and cleaning of tire debris will prolong tire life.

Battery Maintenance

• Do not use battery packs from other models or brands due to safety risks.
• Do not disassemble, squeeze, or puncture the product.
• Do not throw the product into water, fire (including heat sources), or expose it to temperatures above 50°C.
• Water ingress into the battery can damage internal circuits, posing a fire or explosion risk. If water ingress is suspected, stop use immediately and contact after-sales service.
• Do not touch battery contacts, disassemble, or puncture the casing. Avoid metal objects contacting battery contacts to prevent short circuits, damage, or injury/death.
• Avoid fully depleting the battery before recharging; recharge as soon as possible to prolong battery life.
• Use only the original power adapter to avoid damage or fire.
• Fully charge the battery before storing it to extend its lifespan.
• Do not store the scooter in environments above 50°C or below -20°C (e.g., in a car exposed to sun). Do not place in fire, as it may cause battery failure, overheating, or fire.
• Battery performance is optimal at normal temperatures. Performance may decrease below 0°C. Refer to the app for remaining mileage.
• If not used for an extended period, fully charge, store in a cool, dry place, and recharge every 30 days to prevent battery damage (which is not covered by warranty).
• Improper disposal of used batteries pollutes the environment. Dispose of batteries according to local regulations.

Environmental Protection

This product contains recyclable batteries or electronic waste. The integrated rechargeable battery contains substances that can pollute the environment. When disposing of the product, do not mix it with general household waste. Hand it over to a designated electronic waste collection point for environmental protection.

Warranty Content

Limited Warranty Statement

30 DAY SATISFACTION GUARANTEED RETURN POLICY

If unsatisfied with your purchase, LEQISMART allows returns within 30 days of receipt for a refund. Express shipping costs are non-refundable. LEQISMART is not responsible for lost packages or unverified products. Products damaged by the end-user may be denied return.

CONDITIONS FOR REFUND:

1. Request a Return Merchandise Authorization (RMA) from LEQISMART within 30 days of receipt. Contact: after-sale@lqwheel.com.
2. Return shipping costs are the customer's responsibility.
3. Keep your receipt/invoice for warranty service proof of purchase.
4. Returned product must be in good physical condition (not broken or damaged).
5. Include all original accessories.
6. LEQISMART reserves the right to refuse returns without an RMA or without all original parts.

HOW TO OBTAIN WARRANTY SERVICE

A Warranty Service Order must be requested from LEQISMART within the warranty period from the date of receipt. Contact LEQISMART: after-sale@lqwheel.com. Deliver the product in original or equivalent packaging to the address specified by LEQISMART. LEQISMART may require proof of purchase or registration compliance for warranty service.

Questions & Answers

1. What if the E-Scooter arrives missing accessory or broken part?
   Please send a photo and email to LEQISMART Support Team at after-sale@lqwheel.com. The team will respond promptly and send the correct accessory or replacement part.
2. Is it possible to replace some components, for example the tire?
   Yes, please send a photo and email to LEQISMART Support Team at after-sale@lqwheel.com. The team will respond promptly.
3. Is there an Android/iOS APP? If so, what does it do?
   Yes, the LEQISMART APP can be installed by scanning the QR code in the manual or searching "LEQISMART" in Google Play. Pair the scooter via Bluetooth to view current speed, remaining miles, and other real-time riding statistics.

Contact US

Contact LEQISMART for issues relating to riding, maintenance, safety, or errors/faults with your electric scooters.

• E-mail Service: after-sale@lqwheel.com
• Social Media: @LEQISMART.com (Facebook), LEQISMART (YouTube)
• Website: www.LEQISMART.com
• Contact Information: Website: www.LEQISMART.com, Official website service: support@LEQISMART.com, Amazon store service: after-sale@lqwheel.com, eBay store service: ebay-support@LEQISMART.com, Whatsapp: 008613760468813

Manufacturer: Shenzhen LEQI Intelligent Technology Co., Ltd.

Manufacture base: Factory Room 202, No.340 Guihua Road, Guixiang Community, Guanlan Sub-district, Longhua District, Shenzhen, Guangdong, China

Importer: Shenzhenshizhixingkejiyouxiangongsi

Importer base: Krablerstr.48 45326 Essen Germany

European Authorised Representative: NAME: Gedeminnus MB, ADD: Jaunystes 16-6, Klaipeda, 91274, Lithuania, ATTN: Tony, TEL: +37065217474