Parts List

Part Label	Description	Quantity
A	Screws	x7
B	Screws	x2
C	Screws	x2
D	Screws	x4
E	Screws	x4
F	Screws	x4
G	Long Screw	x1
H	Spacer/Washer	x1
I	Washer	x1
J	Washer	x1
K	Ergonomic Wrist Rest	x1
L	Mounting Bracket/Plate	x1
M	Main Desk Surface	x1
N	Track/Rail	x1

Assembly Steps

Step 1: Attach Mounting Plate

Attach the mounting plate (L) to the underside of a desk surface using seven screws (A). This plate serves as the base for the mechanism.

Step 2: Connect Desk Surface to Mechanism

Secure the main desk surface (M) to the lifting mechanism. Use four screws (D), four screws (E), and four screws (F) to firmly attach the surface to the mechanism's mounting points.

Step 3: Install on Track

Slide the assembled desk surface and mechanism onto the track/rail (N). The track/rail (N) is typically pre-attached to the desk or mounting surface.

Step 4: Attach Arm Component

Connect a component of the arm mechanism to the main frame. Use two screws (B) and two screws (C) for this attachment.

Step 5: Attach Wrist Rest

Attach the ergonomic wrist rest (K) to the underside of the main desk surface (M). First, position the bracket/plate (L) onto the underside of the desk surface (M). Then, align the wrist rest (K) with the bracket (L). Insert the long screw (G) through the wrist rest (K), followed by the spacer/washer (H), and then the bracket/plate (L). Secure this assembly to the desk surface (M) using the long screw (G). Washers (I) and (J) are also used in this connection, likely placed between the wrist rest and bracket, or bracket and desk surface, for proper fit and stability.