GULLABERG 8-Drawer Chest

Important Safety Information

⚠️ WARNING! Children have died from furniture tipover.

To reduce the risk of furniture tipover:

• ALWAYS install the provided anti-tip device.
• NEVER place a TV on this product.
• NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• DO NOT defeat or remove the drawer interlock system; it is an important stability and safety system.
• Place heaviest items in the lowest drawers.
• Read and follow each step of the instructions carefully.

Tools Required

The following tools are recommended for assembly:

• Phillips head screwdriver
• Flat head screwdriver
• Spirit level
• Hammer
• Drill with drill bits: 5/16" (8 mm) and 1/8" (3 mm)

Assembly Steps

Step 1: Assemble Base Frame

Connect the main frame components, including side panels and base, using screws, dowels, and cam locks/bolts as indicated.

Step 2: Attach Drawer Slides to Frame

Install the drawer slide components (IKEA CL and IKEA CR) onto the interior sides of the main frame using screws.

Step 3: Attach Back Support

Secure the back support panel to the assembled frame using screws.

Step 4: Install Remaining Drawer Slides

Attach the other set of drawer slide components to the main frame, ensuring proper alignment.

Step 5: Attach Drawer Front Supports

Fasten the drawer front support pieces to the main frame.

Step 6: Attach Top Panel

Position and secure the top panel to the assembled frame using screws.

Step 7: Attach Back Panel Supports

Insert dowels into the back panel supports and attach them to the main frame with screws.

Step 8: Attach Top Panel Supports

Secure additional support pieces to the top panel with screws.

Step 9: Assemble Drawer Boxes

Construct the individual drawer boxes by joining the drawer sides, back, and bottom panels using screws and dowels.

Step 10: Attach Drawer Fronts to Boxes

Connect the drawer fronts to the assembled drawer boxes using cam locks and bolts.

Step 11: Install Drawer Boxes

Slide the completed drawer boxes into the main frame, ensuring they engage correctly with the installed drawer slides.

Step 12: Attach Drawer Slides to Drawer Boxes

Affix the corresponding drawer slide components to the sides of each drawer box.

Step 13: Secure Drawer Boxes

Fasten the drawer boxes securely within the frame using screws.

Step 14: Connect Drawer Fronts to Boxes

Attach the drawer fronts to the drawer boxes using the provided cam lock and bolt system.

Step 15: Insert Drawer Fronts

Slide the drawer fronts onto the drawer boxes and secure them with the locking mechanism.

Step 16: Attach Drawer Slides to Main Frame

Secure drawer slide components to the main frame using screws.

Step 17: Attach Drawer Slides to Drawer Boxes

Attach drawer slide components to the drawer boxes using screws.

Step 18: Attach Drawer Back Panels

Connect the back panels to the drawer boxes using screws.

Step 19: Insert Drawer Back Panels

Slide the drawer back panels into their designated positions.

Step 20: Attach Drawer Bottom Panels

Secure the drawer bottom panels to the drawer boxes with screws.

Step 21: Install Drawer Bottom Panels

Slide the drawer bottom panels into the grooves of the drawer boxes.

Step 22: Attach Top and Bottom Panels

Secure the top and bottom panels of the main unit using screws.

Step 23: Attach Side Panels

Fasten the side panels to the main unit using screws.

Step 24: Attach Drawer Guides

Install the drawer guides onto the main frame using screws.

Step 25: Secure Back Panel

Attach the back panel to the main unit using screws.

Step 26: Insert Drawer Slides

Slide the drawer slides into the main unit.

Step 27: Attach Drawer Runners to Frame

Secure drawer runners to the main frame using screws and an Allen key.

Step 28: Attach Drawer Guides to Frame

Install drawer guides onto the main frame using screws.

Step 29: Adjust Leveling Feet

Adjust the leveling feet at the bottom of the unit for stability.

Step 30: Attach Drawer Slides

Secure drawer slides to the main frame using screws.

Step 31: Final Check

Review all connections and ensure the unit is stable.

Step 32: Wall Mounting Instructions

Important: Furniture must be secured to the wall with the anti-tip device provided to prevent tipover accidents.

Wall Types and Fixings:

• Type A (Solid Walls): Use supplied screws and plugs. Drill a 5/16" (8 mm) hole, insert plug, then screw.
• Type B (Hollow Walls): Use supplied screws and plugs. Drill a 5/16" (8 mm) hole, insert plug, then screw.
• Type C (Solid Wood): Use screws without plugs. Drill a 1/8" (3 mm) hole.

Follow specific instructions for attaching anti-tip hardware to the wall and furniture.

Step 33: Attach Anti-Tip Bracket to Furniture

Secure the anti-tip bracket to the back of the furniture unit using screws (e.g., 10102070).

Step 34: Attach Anti-Tip Bracket to Wall

Secure the corresponding anti-tip bracket to the wall at the appropriate height, ensuring it is anchored securely.

Step 35: Connect Anti-Tip Straps

Connect the anti-tip straps between the furniture bracket and the wall bracket.

Step 36: Assemble Drawer Boxes

Assemble the remaining drawer boxes using screws and dowels.

Step 37: Attach Drawer Slides to Boxes

Attach drawer slide components to the sides of the drawer boxes.

Step 38: Attach Drawer Fronts

Attach drawer fronts to the drawer boxes using screws (e.g., 145718).

Step 39: Attach Drawer Knobs

Attach the drawer knobs to the drawer fronts using screws.

Step 40: Install Drawer Slides

Install the drawer slides onto the main unit.

Step 41: Attach Drawer Fronts

Attach drawer fronts to the drawer boxes using screws (e.g., 106603).

Step 42: Insert Drawers

Insert the assembled drawers into the main unit.

Step 43: Insert Drawers

Insert the assembled drawers into the main unit.

Step 44: Insert Drawers

Insert the assembled drawers into the main unit.