ENGWE Y600 Electric Scooter User Manual and Safety Guide

Welcome

Thank you for choosing the ENGWE Y600 electric scooter. This manual is designed to help you understand your scooter, its features, and how to operate it safely. Please read this manual carefully before use.

Warranty Policy and Legal Statement

Warranty Service: For warranty service, please visit the official ENGWE website to check the warranty policy. If you encounter any quality problems after purchasing an ENGWE product, please contact ENGWE after-sales service at service@engwe-bikes.com. Please provide your order number, purchase interface, motor number picture, and a video of the problem.

Legal Statement: To the extent permitted by law, ENGWE reserves the right to interpret and explain this statement. The laws of the People's Republic of China shall apply to this statement. ENGWE does not assume compensation, liability, or loss that may arise. Riders are responsible for any unforeseen or ongoing risks encountered during the course of the ride. Thank you for your choice and trust in ENGWE.

Official Website: https://engwe-bikes.com

Safety Instructions

General Safety:

• Electric bikes are not permitted on public transport roads; observe local laws and policies when driving.
• Scooters are leisure products requiring practice. ENGWE is not responsible for injury or damage due to rider inexperience or failure to follow instructions.
• Before lending your scooter, ensure the borrower has read this manual, watched instructional videos, and received a beginner's guide. Ensure passenger safety and basic operation proficiency.
• Always ensure new riders wear helmets and other protective equipment.
• Following manual tips and warnings reduces, but does not eliminate, risks. Risks include injury or death from loss of control, collisions, and falls.
• Scooters are suitable for hard surfaces. Use in relatively enclosed road environments (e.g., small areas, parks, dedicated fields) and avoid obstacles and contact points. Slow down in unfamiliar environments.
• Read and follow all 'Caution' and 'Warning' notices. Do not exceed speed limits or ride on motorways.
• For the first ride, avoid areas with children, pedestrians, pets, vehicles, or bicycles.
• Respect pedestrians. Avoid frightening them, especially the elderly, children, disabled, or pregnant women. Alert pedestrians when approaching from behind and slow down when overtaking. Obey local traffic laws.
• In regions without electric scooter laws, strictly adhere to the safety requirements in this manual. ENGWE is not liable for property damage, personal injury, accidents, or legal disputes arising from user violations.

Specific Safety Precautions:

• Unsuitable Riders: Individuals under the influence of alcohol or drugs, those unable to perform strenuous exercise due to illness, those with balance issues, or those exceeding the weight limit (refer to specifications). Pregnant women are also advised against use.
• Supervision: Minors must be supervised by adults.
• Local Laws: Observe local laws and regulations. Do not ride in prohibited areas.
• Visibility: Ensure you can see the area ahead and be seen by others.
• Weather Conditions: Do not ride in snow, rain, slippery, muddy, or icy weather.
• Obstacles: Do not ride over obstacles (sand, rocks, barricades) as this can cause loss of balance or grip, leading to falls.
• Water Damage: Damage and losses caused by water ingress are not covered by the warranty.
• Night Riding: Do not drive at night.
• Acceleration/Deceleration: Do not accelerate or decelerate suddenly. Do not exceed the speed limit to avoid loss of control, collision, and falls.

Pre-Ride Checks: Before riding, check for loose fasteners or damaged parts. If the scooter makes unusual noises, stop use immediately and consult your point of purchase or the manufacturer.

Riding Surface: Observe the road surface, avoid obstacles, and ensure level ground (avoid wet ground, loose sand, rocky ground, ice).

Weight Limit: Suitable for ages 14-60 and weights up to 120kg (264lbs).

Charging Safety: Do not charge if the charging port, charger, or power outlet is wet. Use only the original ENGWE charger. Do not modify the scooter.

Parking: Park on a flat, firm surface. If parking on a slope, the stand must face downhill to prevent tipping. Do not allow the scooter to rush downhill. Check stability after lowering the kickstand. Avoid busy areas; park against a wall on a flat road.

Maintenance: Regular maintenance is recommended for a better driving experience.

Charging Manual: Please read the user manual before charging.

Brake Parts: Do not touch brake parts as this may cause injury.

Product Description and Assembly Instructions

1. Component Information

• 01. Gauge
• 02. Handlebar cover
• 03. Brake handle
• 04. Power lock
• 05. Folding twist
• 06. 3-in-1 switch
• 07. Handlebar
• 08. Handlebar clamp
• 09. Folding Riser
• 10. Riser Clamp
• 11. Headlight
• 12. Front Mudguard
• 13. Folding button
• 14. Folding Pin
• 15. Seatpost Clamp
• 16. Folding Seatpost
• 17. Seat Cushion
• 18. Seat Tube
• 19. Rear mudguard
• 20. Rear Motor Integrated Wheel
• 21. Front Wheel

Assembly Instructions

2. Packing List

Please check carefully that the contents of the box are complete and in good condition. If any parts are missing or damaged, please contact your point of purchase or send an email to the manufacturer. Keep the box and packing materials for at least 15 days for potential shipping needs.

• Directions
• Hex Key (2.5MM/3MM/4MM/5MM/6MM)
• Wrench (10-13MM, 14-17MM)
• Fixed bracket
• Foot bracket
• Saddle
• Saddle Pipe

3. Complete Vehicle Assembly Instructions

• 2.3.1: Open the folding riser: Press the folding button down with your foot, open the folding riser, and fix it by resetting the folding pull pin.
• 2.3.2: Foldable handlebar: Open the folding handlebar and lock the handlebar folding knob.
• 2.3.3: Brake handle adjustment: Adjust the brake handle to the right position and secure with a 5MM spanner.
• 2.3.4: Meter adjustment: Adjust the meter to the right position and secure with a 3MM spanner.
• 2.3.5: Power lock adjustment: Adjust the power lock to a suitable position and secure with a 2.5MM spanner.
• 2.3.6: 3-in-1 switch adjustment: Adjust the 3-in-1 switch to a suitable position and secure with a 2.5MM spanner.
• 2.3.7: Handlebar adjustment: After adjusting the handlebar to the right height, tighten the handlebar clamp and then fasten the handle.
• 2.3.8: Foldable seat tube: Open the folded seat tube, lock the handle, and press the handle to fix it.
• 2.3.9: Saddle assembly: Take out the saddle and saddle tube. Adjust to a suitable position and use a 14MM open-end spanner to lock the clamping code nut.
• 2.3.10: Seat cushion installation: Insert the assembled seat cushion into the folded seat tube. Adjust to the appropriate position, lock the seat tube clamp, and then fasten the handle.
• 2.3.11: Power on: Open the power lock display voltage, press the instrument switch to turn on the power. The meter display should show normal operation.
• 2.3.12: Rear footrest installation: Use 6MM and 13MM open-end spanners to loosen the seat tube fixing screws and shock absorber screws. Remove the seat tube and bracket. Fix the rear footrest and its bracket to the frame plate holes, then lock the screws.

Operation and Maintenance

4. Charging Step

• 2.4.1: Open the charging port rubber plug and insert the charging plug. A red indicator light means charging is normal; a green light means charging is complete.
• 2.4.2: Disconnect the charger and fasten the rubber plug when charging is complete.

Warning: Use only the original charger. Using unauthorized chargers may risk battery damage or fire. Do not connect the charger if the charging port or cable is wet. If the battery is broken or wet, do not charge or use it. The scooter is fully charged when all 5 power bars on the dashboard are lit.

5. Folding and Handling

• 2.5.1: Fold the handlebar: Turn off the scooter, release the handlebar folding twist, pull it outwards, and fold it downwards.
• 2.5.2: Fold the seat tube: Flip the seat cushion handle upwards, rotate the folding clamp 90 degrees, and release the folding seat tube handle to fold the seat tube downwards.
• 2.5.3: Fold the scooter: Pull the folding pin, rotate it, press the folding button, and fold the folding riser down.
• 2.5.4: Handling: Once folded, hold the risers for carrying.

3. Maintenance

1. Cleaning: Use a soft, damp cloth to wipe the main unit. For stubborn dirt, use a toothbrush and toothpaste, then clean with a soft, damp cloth.

Warning: Do not use alcohol, gasoline, kerosene, or other corrosive/volatile solvents, as they may damage the scooter's exterior and interior. Do not spray water with a pressure washer or hose. Ensure the scooter is powered off, the charging cable is unplugged, and the charging port cover is closed before cleaning to prevent damage to electronic components or the battery.

3. Storage: Store the scooter in a bright, dry place. Avoid outdoor parking, direct sunlight, or extreme temperatures, which can accelerate plastic deterioration and reduce battery life.

4. Battery Handling: Do not use third-party batteries without permission. Do not store or charge the battery at temperatures outside the specified limits.

5. Instrumentation & Operation

5.1 Interface Description

• Gear Indicator
• Speed indication (km/h)
• Mileage display (ODO km)
• Battery indicator
• Power switch button
• Switching button (MODE)

5.2 Operating Instructions

• 5.2.1: Power On/Off: Press and hold the power button for 2 seconds to turn the instrument on or off.
• 5.2.2: Speed Gear Selection: Short press the button to switch between 1st, 2nd, and 3rd gears. WARNING: Always start in 1st gear.
• 5.2.3: Headlights: Press the red headlight button to turn front and rear headlights on. Press again to turn them off.
• 5.2.4: Turn Signals: Press the center black key to the left for the left turn signal. Press to the right for the right turn signal. Return the key to the center to turn off signals.
• 5.2.5: Horn: Press the green horn button to sound the horn. Release to stop.
• 5.2.6: Battery Display: 5 cells indicate a full charge. Charge when only 1 cell remains.

5.3 Speed Limit and Release Instructions

• Speed Limit: Pinch the kill handle, open the electric door lock, and throttle 3 times.
• Release Speed Limit: Pinch the kill handle, open the electric door lock, and throttle 3 times.

Specifications

Trademarks and Legal Notices

ENGWE is a registered trademark of ENGWE Technologies Co., Ltd. Android is a trademark of Google. App Store is a logo of Apple Services. Other trademarks mentioned are the property of their respective owners.

This manual was created with care, but product features and designs may change. The actual product may differ in color and appearance from what is described. Please refer to the actual product.

© ENGWE Technologies Co., Ltd. All rights reserved.

Manufacturer: ENGWE Technology Co.

Recommendations:

• Read this user manual carefully before riding.
• Do not let others ride if they have not read this manual correctly.
• Ensure all parts are installed correctly according to instructions, not too loose or too tight.
• Consider purchasing insurance after purchase to minimize risk.
• Before riding, check installation, wheel performance, and battery condition. Stop immediately and contact after-sales service if any abnormal signs are detected.
• Be aware of and comply with all relevant local laws, regulations, and policies regarding scooter riding.
• Data and parameters vary by model and are subject to change without notice.