ENGWE Y600 Electric Scooter User Manual

Welcome to the ENGWE Family

Thank you for choosing to join the ENGWE-BIKES family. We invite you to read through this user manual to learn about your electric scooter and what it is like to own one. First and foremost, remember to be safe out there. Your scooter is an accessory to your lifestyle and activities. Always follow best practices and traffic rules. Even with this ever-evolving technology, it therefore requires basic maintenance and care to always function properly. Preventive maintenance is the name of the game. We invite you to grow with us and take advantage of our modular technical design. Instructions, videos, and live support are being created to provide you with all the knowledge you need to make the most of your ENGWE scooter.

Contact Information:
ENGWE Bikes
service@engwe-bikes.com

Catalogues

• 1. Safety Instructions
• 2. Product Description and Assembly Instructions
• 3. Preserve
• 4. Specification Parameter Table
• 5. Instrumentation and Operation
• 6. Trademarks and Legal Notices
• 7. Warranty Policy

Safety Instructions

General Safety

1. Electric bikes are not allowed on public transport roads; please observe local laws and policies when driving the Y600.
2. Scooters are a leisure product. Practice is needed to master riding skills. ENGWE is not responsible for any injury or damage caused by the rider's inexperience or failure to follow instructions.
3. Before lending your scooter, ensure the borrower has read this manual, watched the instructional video, and received a beginner's guide. Ensure the safety of your passenger and assist them until they learn basic operation.
4. Ensure each new rider wears a helmet and other protective equipment.
5. Following tips and warnings reduces, but does not eliminate, risks. Scooters involve risks of injury or death from loss of control, collisions, and falls.
6. Scooters are suitable for hard surfaces. Use in relatively enclosed road environments (e.g., small areas, parks, dedicated fields) and avoid obstacles or contact points. Be alert and slow down in unfamiliar environments.
7. Read and follow all 'Caution' and 'Warning' notices. Do not exceed the speed limit and do not ride on motorways.
8. For your first ride, avoid areas with children, pedestrians, pets, vehicles, or bicycles, which may be obstacles or hazards.
9. Respect pedestrians' rights. Avoid frightening them, especially the elderly, children, disabled, or pregnant women. Alert pedestrians when approaching from the rear and slow down when overtaking. Obey local traffic laws.
10. In regions without specific electric scooter laws, strictly adhere to the safety requirements in this manual. ENGWE is not liable for property damage, personal injury, accidents, or legal disputes arising from user violations.
11. Before riding, check for loose fasteners or damaged parts. If unusual noise or alarm occurs, stop using immediately and consult your point of purchase or the manufacturer.
12. Observe the road surface; avoid obstacles and ensure level ground (avoid wet ground, loose sand, rocky ground, ice).
13. This product is suitable for ages 14-60 and weighs up to 120kg.
14. Do not attempt to charge if the charging port, charger, or power outlet is wet.
15. Ensure the scooter is charged with the original ENGWE charger.
16. Use only ENGWE approved parts and accessories. Do not modify your scooter.
17. Children should not use scooters or play with scooter parts. Rider's body vibration may affect the driver's body.
18. Recommended to park on a flat, firm surface. If parking on a slope, face downhill to prevent tipping. Do not let the scooter rush down to prevent the kickstand from closing under gravity. Check stability after lowering the kickstand. Do not park in busy areas. Park against a wall or on a flat road.
19. Regular maintenance is recommended for a better driving experience.
20. Read the user manual before charging.
21. Do not touch brake parts as this may cause injury.

Important Safety Tips

• A. People not suitable for this mobility scooter include: those under the influence of alcohol or drugs, those unable to perform strenuous exercise due to illness, those unable to maintain balance, those exceeding the weight limit, and pregnant women.
• B. Minors need adult supervision.
• C. Observe local laws and regulations. Do not ride where prohibited.
• D. Ensure you can see the area in front and be seen by others.
• E. Do not ride in snow, rain, slippery, muddy, or icy weather. Do not ride over obstacles (sand, rocks, barricades) as this may cause loss of balance or grip, leading to a fall.
• F. Damage and losses caused by water ingress are not covered by the warranty.
• G. Do not drive at night.
• H. Do not accelerate or decelerate suddenly. Do not exceed the speed limit to avoid loss of control, collision, and fall.

Component Information

• 01. Gauge
• 02. Handlebar cover
• 03. Brake handle
• 04. Power lock
• 05. Folding twist
• 06. 3-in-1 switch
• 07. Handlebar
• 08. Handlebar clamp
• 09. Folding Riser
• 10. Riser Clamp
• 11. Headlight
• 12. Front Mudguard
• 13. Folding button
• 14. Folding Pin
• 15. Seatpost Clamp
• 16. Folding Seatpost
• 17. Seat Cushion
• 18. Seat Tube
• 19. Rear mudguard
• 20. Rear Motor Integrated Wheel
• 21. Front Wheel

Packing and Assembly

Packing List

Please check carefully that the contents of the box are complete and in good condition. If any parts are missing or damaged, please contact your point of purchase or send an email to the manufacturer. Please keep the box and packing materials for at least 15 days in case you need to ship the scooter later.

• Hex Key Set (2.5MM/3MM/4MM/5MM/6MM)
• Wrench Set (10-13MM, 14-17MM)
• Fixed bracket
• Foot bracket
• Saddle
• Saddle Pipe

Complete Vehicle Assembly Instructions

1. Step 2.3.1: Open the folding riser by pressing the folding button down with your foot, then open the folding riser and fix the folding pull pin to complete the car open state.
2. Step 2.3.2: Open the folding handlebar and lock the handlebar folding knob to lock it in place.
3. Step 2.3.3: Adjust the brake handle to the right position and use a 5MM spanner to lock the screws to fix it.
4. Step 2.3.4: Adjust the meter to the right position and use a 3MM spanner to lock the screws to fix it.
5. Step 2.3.5: Adjust the power lock to a suitable position and use a 2.5MM spanner to lock the screws to fix it tightly.
6. Step 2.3.6: Adjust the 3-in-1 switch to a suitable position and use a 2.5MM spanner to lock the screws to fix it.
7. Step 2.3.7: After adjusting the handlebar to the right height, tighten the handlebar clamp and then fasten the handle to complete the handlebar adjustment.
8. Step 2.3.8: Open the folded seat tube, lock the handle, and press the handle to fix it, completing the opening of the folded seat tube.
9. Step 2.3.9: Take out the saddle and the saddle tube, adjust to the suitable position, and use a 14MM open-end spanner to lock both sides of the clamping code nut, completing the assembly of the saddle and the saddle tube.
10. Step 2.3.10: Insert the assembled seat cushion into the folded seat tube, adjust to the appropriate position, lock the seat tube clamp, and then handle fastening to complete the seat cushion installation.
11. Step 2.3.11: Open the power lock display voltage, then press the instrument switch to open the power meter. Display should show normal operation, completing the installation of the whole car.
12. Step 2.3.12: Use 6MM and 13MM open-end spanners to loosen the seat tube fixing screws and the screws on both sides of the shock absorber. Take away the seat tube and bracket. Fix the rear footrest and its bracket accordingly to the holes of the frame plate, and then lock the screws that have just been taken down accordingly to complete the installation of the rear footrest.

Charging, Maintenance, and Folding

Charging Steps

1. Step 2.4.1: Open the charging port rubber plug and insert the charging plug. The charger indicator light will be red, indicating that charging is normal. A green light indicates that the electricity has been fully charged.
2. Step 2.4.2: Disconnect the charger and fasten the rubber plug when charging is complete.

Warning: Please use the original charger for charging, otherwise there is a risk of battery damage or fire. Please do not connect the charger when the charging port or charging cable is wet. If the battery is broken or water-damaged, do not charge or continue to use the battery. Turn on the power switch. When all 5 power bars on the dashboard are always on, the scooter charging is complete.

Maintenance

1. Cleaning: Use a soft, damp cloth to wipe the main unit. To remove hard dirt, scrub with a toothbrush and toothpaste, then clean with a soft, damp cloth.
2. Warning: Do not use alcohol, gasoline, kerosene, or other corrosive, volatile solvents to clean your scooter. These substances may damage the exterior and interior structure of the scooter body. It is forbidden to spray water on the scooter with a pressure water gun or hose. Before cleaning, ensure the scooter is powered off, the charging cable is unplugged, and the rubber cover of the charging port is closed. Otherwise, electronic components or the battery may be damaged.
3. Storage: When the scooter is not in use, place it in a bright, dry place. Do not park the scooter outdoors. Sunlight exposure or extreme temperature conditions (too hot and too cold) will accelerate the deterioration of plastic parts and may result in shorter battery life.
4. Battery removal and maintenance: Do not use third-party batteries without permission, as this is a safety hazard. Do not store or charge the battery at temperatures beyond the specified limits (see specifications).

Folding and Handling

1. Step 2.5.1: Turn off the scooter, release the handlebar folding twist and pull it towards the two outer sides, then fold it downwards; the handlebar folding is completed.
2. Step 2.5.2: Flip the seat cushion handle upward, release the folding clamp code 90 degrees rotation, and then release the folding seat tube handle; it will be folded downward to complete the seat tube folding.
3. Step 2.5.3: Pull the folding pin and rotate it to other positions, then press the folding button and fold the folding riser down into place to complete the folding of the whole car.
4. Step 2.5.4: Once the scooter is folded, hold the risers for handling.

Specification Table

Instrumentation & Operation

Interface Description

• Gear Indicator
• Speed indication (e.g., "00 km/h")
• Mileage display (e.g., "ODO 00000km")
• Battery indicator
• Power switch
• Switching button (MODE)

Operating Instructions

1. 5.2.1: Open the power lock and long press the power button for 2 seconds to switch on the instrument. Long press for 2 seconds to switch off.
2. 5.2.2: Short press the button once to switch between 1-2-3 speeds for different experiences. Warning: Start in 1st gear, not 2nd or 3rd!
3. 5.2.3: Press the red headlight button to turn on the front and rear headlights. Press again to turn them off.
4. 5.2.4: The center black key opens to the left for the left turn signal, and to the right for the right turn signal. The key returns to center to turn off signals.
5. 5.2.5: Press the green horn button to sound the horn. Release to stop.
6. 5.2.6: Instrument power display shows charge level: 5 cells for full charge. When power is at 1 cell, the vehicle should be charged in time.

Speed Limit and Release Instructions

1. 5.3.1: To set speed limit: Pinch the kill handle, open the electric door lock, then throttle pinch 3 times to complete the speed limit setting.
2. 5.3.2: To release speed limit: Perform the same operation: pinch the kill handle, open the electric door lock, then throttle pinch 3 times to finish lifting the speed limit.

Trademarks and Legal Notices

ENGWE is a registered trademark of ENGWE Technologies Co., Ltd. Android is a trademark of Google. App Store is a logo of Apple Services. Other trademarks mentioned herein are the property of their respective owners. When printing this manual, as many feature descriptions and explanations as possible were included. However, due to continuous improvement of product features and design changes, it may not correspond to the product purchased. Due to product updates, the actual product may differ from the color and appearance mentioned in this manual. Please refer to the actual product. ENGWE Technologies Co., Ltd. All rights reserved. Manufacturer: ENGWE Technology Co.

Recommendations

1. Please read this user manual carefully before riding.
2. Do not allow others to ride this scooter if they have not read this manual correctly.
3. Please read this manual carefully. All parts of the scooter must be installed correctly according to the instructions. Ensure installation is not too loose or too tight to avoid damage or failure.
4. In order to minimize risk, please purchase insurance in time after purchasing the product.
5. Before riding, check the installation state, wheel performance, and battery condition according to the manual's instructions to ensure the scooter is in proper condition and there are no signs of looseness or damage. If there are any abnormal signs, stop riding immediately and contact after-sales for inspection and guidance.
6. You are obligated to be aware of all relevant laws, regulations, and policies regarding scooter riding in your area and to strictly comply with them.
7. The data and parameters of the scooter vary from model to model and are subject to change at any time without notice.

Warranty Policy

Warranty Service: Please go to the official website to check ENGWE's warranty policy.

After purchasing ENGWE products, if you have any quality problems, please contact ENGWE after-sales service: service@engwe-bikes.com. Please provide order number, purchase interface, motor number picture, and problem video.

Legal Disclaimer: To the extent permitted by law, ENGWE reserves the right to interpret and explain this statement. The laws of the People's Republic of China shall apply to this statement. If this causes or may cause compensation, liability, or loss, ENGWE does not assume liability. Riders are responsible for any unforeseen or ongoing risks encountered during the course of the ride. Thank you again for your choice and trust in ENGWE.