Behringer PRO MIXER DX626 Quick Start Guide
Professional 3-Channel DJ Mixer with BPM Counter and VCA Control
For more details on the full functionality of this product, see the product page on behringer.com and download the full manual.
Important Safety Instructions
- ⚠️ Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with 1/4" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
- ⚠️ This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.
- ⚠️ This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
- ⚠️ Caution: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.
- ⚠️ Caution: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
- ⚠️ Caution: These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.
- 1. Read these instructions.
- 2. Keep these instructions.
- 3. Heed all warnings.
- 4. Follow all instructions.
- 5. Do not use this apparatus near water.
- 6. Clean only with dry cloth ?.
- 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- 9. Do not defeat the safety purpose of the polarized or grounding-type plug ?. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- 11. Use only attachments/accessories specified by the manufacturer.
- 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- 13. Unplug this apparatus during lightning storms ⚡ or when unused for long periods of time.
- 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- 15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection ?.
- 16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Legal Disclaimer & Limited Warranty
Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. Behringer is part of the Music Group. All trademarks are the property of their respective owners. Music Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary from actual product.
Limited Warranty: This limited warranty is valid for one (1) year from the original date of purchase, provided the product was purchased from an authorized Music Group reseller. Registration of your purchase at behringer.com is recommended. The warranty covers mechanical and electronic components against defects in material and workmanship under normal operating conditions. It excludes consumable parts, damage from misuse, unauthorized modifications, and normal wear and tear. For warranty service, contact your retailer or Music Group directly via behringer.com. Retain your sales receipt as proof of purchase.
PRO MIXER DX626 Controls
The PRO MIXER DX626 offers a range of intuitive controls for professional DJing:
- (1) MIC INPUT: Balanced XLR connector for your dynamic microphone.
- (2) GAIN Control: Adjusts the input signal level for each channel.
- (3) 3-Band Equalizer (HIGH, MID, LOW): Features kill characteristics for significant signal reduction (-32 dB) or boost (+12 dB).
- (4) MIC/LINE-PHONO Switch (Channel 1): Selects between microphone, line, or phono signal for Channel 1. The rear PHONO/LINE switch (21) determines the specific line/phono setting.
- (5) PHONO/LINE Switch (Channels 2 & 3): Selects between Phono (for turntables) and Line (for other sources like CD/MD players) input signals.
- (6) CHANNEL Fader: Adjusts the volume for each individual channel.
- (7) TALKOVER Function: Pressing the TALK button lowers the signal of other input channels, allowing your voice from the microphone to be heard more clearly.
- (8) MASTER Control: Sets the overall output volume for the MASTER output.
- (9) BALANCE Control: Adjusts the stereo image of the MASTER output.
- (10) BOOTH Control: Sets the output volume for the BOOTH output, typically for monitor speakers.
- (11) CUE Control: Adjusts the volume of the headphone signal (PFL signal).
- (12) CH-1, CH-2, CH-3 Buttons: Select the signal source for headphone monitoring (PFL). Allows previewing individual channels or all three simultaneously.
- (13) MASTER/CUE Fader: Controls the volume ratio between input channel signals and the MASTER signal in the headphones.
- (14) LED Displays: Three 10-character LED displays show PFL (lower chain) and MASTER (upper chains) signal levels.
- (15) BPM Counter: Calculates and displays the tempo (Beats Per Minute) for channels 2 and 3, aiding in smooth track transitions.
- (16) CROSSFADER: Allows smooth crossfading between channels 2 and 3.
- (17) Lamp Connector: Standard 12V BNC connector for an external lamp ?.
- (18) POWER Button: Turns the DX626 on and off.
- (19) HEADPHONES Connector: For connecting headphones ? for PFL monitoring. Minimum impedance of 32 ohms recommended.
- (20) INPUT 1: Channel 1 input, switchable between Phono and Line sensitivity.
- (21) PHONO/LINE Switch (Channel 1): Selects Line or Phono input for Channel 1. Ensure the front MIC/LINE-PHONO switch (4) is set to LINE-PHONO.
- (22) PHONO Inputs (Channels 2 & 3): Dedicated inputs for connecting turntables.
- (23) LINE Inputs (Channels 2 & 3): Inputs for connecting line-level sources like tape decks, CD players, or MD players.
- (24) GND Connectors: Ground terminals for turntables ?.
- (25) TAPE Output: Fixed-level output for connecting to recording devices (tape decks, DAT recorders, etc.). Input level must be adjusted on the recording device.
- (26) BOOTH Output: Provides an additional output for an amplifier, controlled by the BOOTH knob. Ideal for monitor speakers or a second zone.
- (27) MASTER Output: Main audio output for connecting to an amplifier, controlled by the MASTER knob.
- (28) Power Connector: Connection for the AC power cable.
- (29) FUSE HOLDER / VOLTAGE SETTING: For fuse replacement and voltage selection.
- (30) SERIAL NUMBER: Unique identifier for the unit.
Specifications
| Feature | Specification |
|---|---|
| Audio Inputs | |
| Mic | 40 dB Gain, elec. balanced input |
| Phono 1, 2 and 3 | 40 dB Gain @ 1 kHz, unbalanced inputs |
| Line 1, 2 and 3 | 0 dB Gain, unbalanced inputs |
| Audio Outputs | |
| Master | max. +21 dBu @ +10 dB (Line In) |
| Booth | max. +21 dBu @ +10 dB (Line In) |
| Tape | type. 0 dBu |
| Phones | type. 125 mΩ @ 1% THD |
| Equalizer (+/-8 dB) | |
| Stereo Low | +12 dB/-32 dB @ 50 Hz |
| Stereo Mid | +12 dB/-32 dB @ 1.2 kHz |
| Stereo High | +12 dB/-32 dB @ 10 kHz |
| Mic Low | +12 dB/-32 dB @ 50 Hz |
| Mic Mid | +12 dB/-32 dB @ 1.2 kHz |
| Mic High | +12 dB/-32 dB @ 10 kHz |
| Talkover Button (Mic) | -16 dB |
| Lamp (BNC) | 12 V/400 mA |
| General | |
| Signal-to-noise ratio (S/N) | > 87 dB (Line) |
| Crosstalk | > 70 dB (Line) |
| Distortion (THD) | < 0.05% |
| Frequency response | 20 Hz - 20 kHz |
| Gain control range | -16 dB - +6 dB |
| Power Supply | |
| Mains Voltage | |
| USA/Canada | 120 V~, 60 Hz |
| U.K./Australia | 240 V~, 50 Hz |
| Europe | 230 V~, 50 Hz |
| General Export Model | 100 - 120 V~, 200 - 240 V~, 50 - 60 Hz |
| Power Consumption | max. 15 W |
| Fuse | 100 - 120 V~: T 500 mA H 200 - 240 V~: T 315 mA H |
| Mains Connection | Standard IEC Receptacle |
| Dimensions/Weight | |
| Dimensions (H x W x D) | approx. 2.4 / 3.6 x 10 x 12" (approx. 61 / 91 x 254 x 305 mm) |
| Weight | approx. 2.4 kg |
FCC Compliance Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Important information: Changes or modifications to the equipment not expressly approved by MUSIC Group can void the user's authority to use the equipment.
