Portable AC Unit for Server Rooms - 24,000 BTU / 7 kW (SRCOOL24KE)
Key Features
24,000 BTU Cooling Capacity: Provides substantial cooling for server room environments.
Effective Spot Cooling: Delivers targeted cooling where it's needed most.
Non-Locking 6-20P LCDI Plug: Features a standard plug with Leakage Current Detection and Interruption for safety.
Filters and Dehumidifies Air: Improves air quality by removing moisture and particulates.
Digital Temperature Readout: Displays current temperature for easy monitoring.
Unit Components
The unit is comprised of the following parts:
- 1. Front Panel: The primary front surface of the unit.
- 2. Cool Air Outlet: Vents where cooled air is expelled.
- 3. Top Panel: The upper surface of the unit.
- 4. Control Panel: Located on the front, housing operational controls.
- 5. Round-Type Exhaust Duct Adapter: Connection point for the exhaust duct.
- 6. Exhaust Duct: Hose for expelling hot air.
- 7. Side Panel: The side surfaces of the unit.
- 8. Hot Air Outlet without Exhaust Duct: An alternative outlet for hot air if the duct is not used (referencing adapter 5 and duct 6).
- 9. Rear Panel: The back surface of the unit.
- 10. Upper Drain Hole: An opening for draining condensate, with a plug installed.
- 11. Cool Air Inlet Grill: Vents where ambient air is drawn in for cooling.
- 12. Hot Air Inlet Grill: Vents for drawing in air to be expelled as hot air.
- 13. Side Panel (Removable with Pre-Installed Filter): A side panel that can be removed, featuring a built-in air filter.
- 14. Lower Drain Hole: A secondary opening for draining condensate, with a plug installed.
Control Panel Functions
The control panel includes the following features:
- 1. POWER Button: To turn the unit on or off.
- 2. FUNCTION Button: To cycle through operating modes (e.g., Cooling, Dehumidify).
- 3. Temperature Control Button (Up): Increases the set temperature.
- 4. Temperature Control Button (Down): Decreases the set temperature.
- 5. Numeric Display: Shows the set temperature and operational status.
- 6. FAN SPEED Button: Adjusts the fan speed (e.g., High, Medium, Low, Auto).
- 7. TIMER Button: Sets an operating timer.
- 8. QUIET Button: Activates a quieter operating mode.
Physical Dimensions
The unit's dimensions are provided in inches and millimeters:
- Top View: Width: 22.57" [573.20mm], Depth: 27.87" [708mm]
- Bottom View: Width: 22.57" [573.20mm], Depth: 13.07" [332mm]
- Side View: Height: 27.21" [691.10mm], Depth: 20.20" [513.20mm]
- Front View: Height: 27.21" [691.10mm], Width: 22.57" [573.20mm]
- Back View: Height: 42.52" [1080mm], Width: 16.85" [428mm], Exhaust Duct Opening Diameter: 7.96" [202.20mm]
Note: The diagram shows the unit is mounted on casters for mobility.
Further Information
For more details and product information, please visit the Eaton website:
Eaton is a registered trademark of Eaton. All other trademarks are properties of their respective companies.
Follow Eaton on social media for the latest product and support information.
