ROLINE Wireless HDMI Extender TX/RX

Introduction

The transmitter (TX) unit, with USB-C and DP Alt Mode support, ensures seamless cross-platform connectivity with Windows, macOS, and ChromeOS on PCs or tablets.

TX Unit (USB-C with DP Alt Mode):

• Features a USB-C connector for input.
• Includes a Reset button.
• Includes a Pairing and Screen On/Off button.

The receiver (RX) unit features an HDMI port for compatibility with televisions and monitors.

RX Unit:

• Features an HDMI connector for output to display.
• Includes a Reset button.
• Requires USB-A 5V power input.

Pairing Process

1. RX Dongle Initialization

1. Confirm the 'RX peripheral'.
2. Connect the USB-A side to the power source.
3. After startup, access the main interface.

Visual Description: A diagram shows a USB-A power adapter connected via a cable to the RX dongle, which is then connected via HDMI to a monitor. The monitor displays 'WIRELESS DISPLAY P2P DONGLE'.

4. Press and hold the RX button to display the pairing prompt.
5. Verify that the version number, SSID display, and interface version are normal and OK.

Visual Description: A close-up shows the RX unit's reset button being pressed. A monitor displays the 'WIRELESS DISPLAY P2P DONGLE' interface, showing 'SSID: Mate-281899BE', 'PSK: 91548602', and 'V 22455032'. The status indicates 'Pairing mode' and 'Ready to Pair'.

2. Pairing TX Dongle to Device

1. Confirm the 'TX peripheral' and connect to the device.
2. Press and hold the TX's Pairing and Screen On/Off buttons for approximately 5 seconds until the indicator light turns off. About 1 second later, the indicator light will blink faster.
3. Release the button to start pairing (TX/RX).

Visual Description: A laptop is shown connected via USB-C to the TX dongle. The TX dongle is connected via HDMI to a monitor. A graphic indicates pressing the button for 5 seconds.

4. Verify that 'Pairing OK' is displayed and the screen is normal and OK.

Visual Description: The monitor displays 'WIRELESS DISPLAY P2P DONGLE' with 'TX' and 'RX' icons, and the status 'Pairing OK'.

5. The pairing process is complete, and the content of the device's screen is displayed on the monitor.

Visual Description: The screen content from the laptop is now mirrored on the monitor.

3. Disable/Restore Mirroring in Pairing Mode

1. Press the Pair and Screen On/Off buttons on the connected device.
2. Mirroring is disabled, and the monitor displays the pairing prompt.

Visual Description: A laptop is connected to a TX dongle, which is connected to a monitor. The monitor shows the 'WIRELESS DISPLAY P2P DONGLE' interface with TX and RX status indicators.

3. Press the Pair and Screen On/Off buttons again to restore mirroring.

Visual Description: The laptop screen is again mirrored on the monitor.

Dual TX Dongle Operation

1. Pair the Second TX Dongle

1. Connect the second TX dongle to a new device.

Visual Description: Two laptops are shown, each connected to a TX dongle. One RX dongle is connected to a monitor.

2. Long press the RX button to display the pairing prompt. Ensure 'Ready to Pair' is displayed.

Visual Description: A close-up shows the RX unit's reset button being pressed. A monitor displays the 'WIRELESS DISPLAY P2P DONGLE' interface, showing 'SSID: Mate-281899BE', 'PSK: 91548602', and 'V 22455032'. The status indicates 'Pairing mode' and 'Ready to Pair'.

3. Press and hold the Pair and Screen On/Off buttons on the second TX dongle for approximately 5 seconds.
4. Release the button to start pairing.

Visual Description: The second laptop is shown connected via USB-C to the second TX dongle, which is connected via HDMI to the monitor. A graphic indicates pressing the button for 5 seconds.

5. Ensure that 'Pairing OK' is displayed and the screen is normal.

Visual Description: The monitor displays 'WIRELESS DISPLAY P2P DONGLE' with 'TX' and 'RX' icons, and the status 'Pairing OK'.

6. The pairing process is complete, and the content of the second device's screen is displayed on the monitor.

Visual Description: The screen content from both laptops is now mirrored on the monitor.

2. Switch Mirroring Between Two Paired Devices

1. Ensure both devices are connected to their respective TX dongles and pairing with the RX on the monitor is complete.

Visual Description: Two laptops are shown connected to TX dongles, and an RX dongle is connected to a monitor.

2. Press the Pair & Screen On/Off button of the currently connected device to display the pairing prompt.
3. Press the Pair and Screen On/Off buttons of the device you wish to connect.

Visual Description: The monitor shows the 'WIRELESS DISPLAY P2P DONGLE' interface with a pairing prompt. Then, the screen content from the second laptop is shown mirrored on the monitor.

4. The connection is established, and the content of the new device's screen is displayed on the monitor.

Visual Description: The second laptop's screen is now mirrored on the monitor.