Introduction
The Transmitter (TX) unit features USB-C support with DisplayPort Alternate Mode (DP Alt-Mode), ensuring seamless, cross-platform connectivity with Windows, macOS, and ChromeOS on PCs or tablets.
Visual of the Transmitter (TX) unit with a USB-C connector and a cable leading to the main unit. The unit has two buttons: "Reset-Taste" (Reset Button) and "Pairing- und Bildschirm-Ein-/Aus-Taste" (Pairing and Screen On/Off Button).
The Receiver (RX) unit is equipped with an HDMI connector for compatibility with televisions and monitors.
Visual of the Receiver (RX) unit showing an HDMI connector and a USB-A connector for power. It also has a button labeled "Reset-Taste" (Reset Button).
Pairing Process
1. Initialize the RX Dongle
- Confirm the "RX-Gerät" (RX Device).
- Connect the USB-A side to the power source.
- Access the main interface after booting.
Diagram illustrating the RX dongle connection: a USB-A connector plugged into a power source (indicated by a 5V symbol), connected via a cable to the RX dongle, which has an HDMI connector.
Representation of a TV screen displaying "WIRELESS DISPLAY P2P DONGLE" with icons indicating TX, RX, Wi-Fi connection, and HDMI output.
- Press and hold the button on the RX dongle to display the pairing prompt.
- Verify that the version number, SSID display, and interface version number are normal and correct.
Close-up view of the RX dongle showing the button being pressed for approximately 5 seconds.
Representation of a TV screen showing connection status: SSID, PSK, "Pairing mode", and "Ready to Pair".
2. Pair the TX Dongle
- Confirm the "TX-Gerät" (TX Device) and establish a connection to the device.
- Press and hold the Pairing and Screen On/Off button on the TX dongle for approximately 5 seconds until the light turns off. About 1 second after the light goes out, the light will blink faster.
- Release the button to begin pairing (TX/RX).
Diagram showing a laptop connected via USB-C to the TX dongle.
Representation of a TV screen showing connection status: "Pairing mode", "Pairing...", and version information.
- Confirm that "Pairing OK" is displayed and the screen is normal.
- The pairing process is complete, and the content of the device screen is mirrored to the monitor.
Representation of a TV screen showing "WIRELESS DISPLAY P2P DONGLE" with icons indicating TX, RX, Wi-Fi connection, HDMI output, and "Pairing OK".
3. Disable/Restore Mirroring in Pairing Mode
- Press the "Koppeln" (Pair) and "Bildschirm ein/aus" (Screen On/Off) buttons on the connected device.
- Mirroring is turned off, and the monitor displays the pairing prompt.
Diagram showing a laptop connected to the TX dongle, with a Wi-Fi symbol indicating wireless transmission.
Representation of a TV screen showing "WIRELESS DISPLAY P2P DONGLE" with connection status icons.
- Press the "Koppeln" (Pair) and "Bildschirm ein/aus" (Screen On/Off) buttons again to restore mirroring.
Diagram showing the TX dongle with the button being pressed, and a laptop connected to it, with a Wi-Fi symbol indicating transmission to a TV.
Operation with Dual TX Dongles
1. Pair the Second TX Dongle
- Connect the second TX dongle to a new device.
Diagram showing a laptop connected via USB-C to the TX dongle.
- Press and hold the button on the RX dongle to display the pairing prompt. Ensure that "Bereit zum Koppeln" (Ready to Pair) is displayed.
Representation of a TV screen showing "Pairing mode" and "Ready to Pair" with SSID and PSK details.
- Press and hold the Pair and Screen On/Off button on the second TX dongle for approximately 5 seconds.
- Release the button to begin pairing.
Diagram showing the second TX dongle with the button being pressed for approximately 5 seconds.
Representation of a TV screen showing "Pairing mode" and "Pairing..." with SSID and PSK details.
- Verify that "Pairing OK" is displayed and the screen is normal.
- The pairing process is complete, and the content of the second device's screen is mirrored to the monitor.
Representation of a TV screen showing "WIRELESS DISPLAY P2P DONGLE" with connection status icons and "Pairing OK".
Visual showing two laptops connected wirelessly to a central monitor via their respective TX dongles.
2. Switch Mirroring Between Two Paired Devices
- Ensure both devices are connected to their respective TX dongles and the pairing with the RX on the monitor is complete.
Visual showing two laptops connected wirelessly to a central monitor via their respective TX dongles.
- Press the "Koppeln und Bildschirm ein/aus" (Pair and Screen On/Off) button on the connected device to display the pairing prompt.
- Press the "Koppeln" (Pair) and "Bildschirm ein/aus" (Screen On/Off) buttons on the device you wish to connect.
Diagram showing a laptop connected to the TX dongle, with a Wi-Fi symbol indicating wireless transmission to a TV.
Diagram showing a laptop connected to the TX dongle, with a Wi-Fi symbol indicating wireless transmission to a TV.
- The connection is established, and the content of the new device's screen is mirrored to the monitor.
Visual showing two laptops connected wirelessly to a central monitor via their respective TX dongles.
