Manuals+

ROLINE Wireless Extension Kit TX+RX, C-HDMI, 1080p, 20m

Model: 14.01.3418

Version: 1.0

Introduction

The transmitter (TX) with USB-C and DP Alt Mode support ensures seamless cross-platform connectivity with Windows, macOS, and ChromeOS on PCs or tablets.

USB-C with DP Alt Mode (Transmitter - TX):

Receiver (RX):

Pairing Process

1. Initialize the RX Dongle

  1. Confirm the "RX device".
  2. Connect the USB-A side to the power source.
  3. After startup, access the main interface.

Visual Description: A diagram shows a USB-A power adapter connected via a cable to the RX dongle, which is then connected to an HDMI port on a monitor. The monitor displays "WIRELESS DISPLAY P2P DONGLE" with TX and RX icons.

  1. Press and hold the RX button to display the pairing prompt.
  2. Verify that the version number, SSID display, and interface version number are normal and OK.

Visual Description: A close-up shows the RX dongle with a button labeled "Reset". The monitor displays "SSID: Mate-281899BE", "PSK: 91548602", "Pairing mode", and "Ready to Pair".

2. Press the Pair and Screen On/Off Button on the TX Dongle to Pair the Device

  1. Confirm the "TX device" and connect to the device.
  2. Press and hold the pairing and screen on/off buttons on the TX for approximately 5 seconds until the indicator light turns off. After about 1 second, the indicator light will flash more rapidly.
  3. Release the button to start pairing (TX/RX).

Visual Description: A laptop connected via USB-C to the TX dongle. The TX dongle is shown with a button labeled "5 sec".

  1. Verify that "Pairing OK" is displayed and the screen is normal and OK.

Visual Description: The monitor displays "WIRELESS DISPLAY P2P DONGLE" with TX and RX icons, and "Pairing OK".

  1. The pairing process is complete, and the content of the device's screen is displayed on the monitor.

Visual Description: A laptop screen is mirrored onto a large monitor.

3. Disable/Restore Mirroring in Pairing Mode

  1. Press the Pair and Screen On/Off buttons of the connected device.
  2. Mirroring is disabled, and the monitor displays the pairing prompt.

Visual Description: Diagram 1 shows a hand pressing the button on the TX dongle. Diagram 2 shows the monitor displaying the "WIRELESS DISPLAY P2P DONGLE" interface with TX and RX icons.

  1. Press the Pair and Screen On/Off buttons again to restore mirroring.

Visual Description: Diagram 3 shows a hand pressing the button on the TX dongle again, followed by a laptop screen mirrored on the monitor.

Operation with Dual TX Dongles

1. Pair the Second TX Dongle

  1. Connect the second TX dongle to a new device.

Visual Description: A laptop connected via USB-C to the TX dongle, mirroring its screen to a monitor. Another laptop is also shown connected to the monitor.

  1. Press and hold the RX button to display the pairing prompt. Ensure "Ready to Pair" is displayed.

Visual Description: A close-up shows the RX dongle with a button labeled "Reset". The monitor displays "SSID: Mate-281899BE", "PSK: 91548602", "Pairing mode", and "Ready to Pair".

  1. Press the Pair and Screen On/Off buttons of the second TX and hold for approximately 5 seconds.
  2. Release the button to start pairing.

Visual Description: A laptop connected via USB-C to the TX dongle, with a "5 seconds" indicator. The monitor shows "Pairing...".

  1. Ensure "Pairing OK" is displayed and the screen is normal.

Visual Description: The monitor displays "WIRELESS DISPLAY P2P DONGLE" with TX and RX icons, and "Pairing OK".

  1. The pairing process is complete, and the content of the second device's screen is displayed on the monitor.

Visual Description: Two laptops are shown mirroring their screens to a central monitor.

2. Switch Mirroring Between Two Paired Devices

  1. Ensure both devices are connected to their respective TX dongles and that pairing with the RX on the monitor is complete.

Visual Description: Two laptops are shown mirroring their screens to a central monitor.

  1. Press the Pair & Screen On/Off button of the connected device to display the pairing prompt.
  2. Press the Pair and Screen On/Off buttons of the device you wish to connect.

Visual Description: Diagram 2 shows the monitor displaying the "WIRELESS DISPLAY P2P DONGLE" interface. Diagram 3 shows a hand pressing the button on the TX dongle of the second laptop.

  1. The connection is established, and the content of the new device's screen is displayed on the monitor.

Visual Description: A laptop is shown mirroring its screen to a central monitor, with another laptop also connected.

PDF preview unavailable. Download the PDF instead.

14013418 fr manu scmp Microsoft: Print To PDF

Related Documents

Preview ROLINE 14.01.3418 Wireless Extender Set: Manual and Setup Guide
Comprehensive manual for the ROLINE 14.01.3418 Wireless Extender Set (TX+RX, C-HDMI, 1080p, 20m). Learn how to pair, connect, and operate the device for seamless wireless display across multiple devices.
Preview ROLINE Wireless Extender Set, TX+RX, C-HDMI, 1080p, 20 m User Manual
User manual for the ROLINE Wireless Extender Set (TX+RX) with C-HDMI connectivity, supporting 1080p resolution over 20 meters. Includes setup, pairing, and dual transmitter operation instructions.
Preview ROLINE Wireless P2P HDMI Display Dongle Set - 1080p, 20m Range
Extend your display wirelessly up to 20 meters with the ROLINE P2P HDMI dongle set. Supports 1080p resolution and multiple operating systems including Windows, macOS, iOS, and Android.
Preview ROLINE Wireless HDMI Extender TX/RX - User Manual
User manual for the ROLINE Wireless HDMI Extender (TX/RX) supporting USB-C, 1080p resolution, and a 20m range. Includes setup, pairing, and operation instructions for single and dual dongle configurations.
Preview ROLINE C-HDMI Wireless Extender Set TX+RX - 1080p, 20m | High-Quality Wireless Display Extension
Discover the ROLINE C-HDMI Wireless Extender Set (TX+RX) for seamless, high-definition wireless display extension up to 20 meters. Supports 1080p Full HD resolution and USB-C DP Alt Mode for easy connection to notebooks.
Preview ROLINE Wireless Extender Set Manual: TX+RX, C-HDMI, 1080p, 20m
User manual for the ROLINE Wireless Extender Set, featuring TX+RX, C-HDMI, 1080p resolution, and a 20m range. Learn about setup, pairing, and usage.
Preview ROLINE Drahtloses P2P-Anzeige-Dongle-Set, Tx+Rx, HDMI, 1080p, 20 m
Das ROLINE drahtlose P2P-Anzeige-Dongle-Set (Tx+Rx) ermöglicht die drahtlose Übertragung von HDMI-Signalen bis 1080p über eine Distanz von 20 Metern. Es spiegelt und erweitert die Anzeige von Notebooks, Tablets und Mobiltelefonen.
Preview ROLINE Kit de dongle d'affichage P2P sans fil - HDMI, 1080p, 20m
Informations détaillées sur le kit de dongle d'affichage P2P sans fil ROLINE, avec connectivité HDMI, résolution 1080p et portée de 20m. Compatible avec Windows, macOS, iOS et Android.